Authorized ABB Distributor (Installation Products)
ABB - Installation Products RAB 1/0-32 - Aluminum Flood-Seal, Multi-Port Connector, RAB 1/0 Series, Conductor Range #14 - 1/0. Santoprene Coated. RUS Accepted. Total Outlets 5 - alternating with 3 on one side and 2 on the other side. Length 4-25/64 inch. Includes Plugs, Caps and Screws.

ABB Installation Products RAB 1/0-32 Aluminum Flood-Seal, Multi-Port Connector, RAB 1/0 Series, Conductor Range #14 - 1/0.…

UPC: 783786744992


Documents & Media
Installation InstructionsManufacturer Product Website

Contact for Pricing

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

The ABB RAB 1/0-32 is a 5-pole aluminum Flood-Seal multi-port connector engineered for secondary underground distribution systems. Designed for URD direct burial, below-grade boxes, above-grade pedestals, and street light taps, this connector delivers reliable multi-service connections in harsh environments. Constructed from high-strength, high-conductivity 6061-T6 aluminum alloy with tin-plated screws, it ensures long-term durability and conductivity. The Santoprene-coated housing provides environmental protection, while the TPE compound insulation delivers high-performance performance across a wide temperature range (-40°F to 194°F / -40°C to 90°C). Measuring 4.60" x 2.90" (117 mm x 74 mm), the RAB 1/0-32 features 5 outlets—3 on one side and 2 on the opposite—optimizing space and wiring efficiency. The package includes plugs, caps, and screws for complete installation. ANSI C119.1 compliant and RUS accepted, this connector is ideal for utility, industrial, and commercial applications requiring robust, weatherproof connections.
  • 5-pole design with 3 outlets on one side and 2 on the opposite for efficient wiring
  • Aluminum 6061-T6 construction with Santoprene coating for corrosion resistance
  • 600 V rating with 100% hi-pot tested at 4000 V for 60 seconds
  • Operating temperature range: -40°F to 194°F (-40°C to 90°C)

Specifications

Application
Dual-Rated Connector
Color
Black
Conductor Range
#14 to 1/0 AWG
Connection
Mechanical
Environmental Conditions
Waterproof
Insulation
yes
Material
6061-T6 Aluminum Connector, Santoprene Body
Number Of Conductors
5
Number of Poles
5
Size
Length 4-9/32 inches
Special Features
High Performance, Dual Rated Connectors
Standard
RUS Accepted
Type
Aluminum Flood-Seal Multi-Port Connector RAB 1/0 Series
Package Dimensions (L x W x H)
0.01 IN x 0.01 IN x 0.01 IN
Package Dimensions (L x W x H)
0.0254 cm x 0.0254 cm x 0.0254 cm
Package Weight (Imperial)
1.0000 L
Package Weight (Metric)
0.4540 kg
Multi Seal, Aluminum Insulated Bus Connector, #14 - 1/0, Aluminum and Copper, Three Conductor, Orange Plug instead of Black

RAB 1/0-3 OP

Multi Seal, Aluminum Insulated Bus Connector, #14 - 1/0, Aluminum and Copper, Three Conductor, Orange Plug instead of Black
Aluminum Flood-Seal Multi-Port Connectors - RAB 1/0 Series, length 3-7/16 inch, outlets 4, two on each side

RAB 1/0-22

Aluminum Flood-Seal Multi-Port Connectors - RAB 1/0 Series, length 3-7/16 inch, outlets 4, two on each side
Aluminum Flood-Seal, Multi-Port Connector, RAB 1/0 Series, Conductor Range #14 - 1/0. Santoprene Coated. RUS Accepted. Total Outlets 3. Length 2-39/64 inch. Includes Caps and Screws.

RAB 1/0-3

Aluminum Flood-Seal, Multi-Port Connector, RAB 1/0 Series, Conductor Range #14 - 1/0. Santoprene Coated. RUS Accepted. Total Outlets 3. Length 2-39/64 inch. Includes Caps and Screws.
Aluminum Flood-Seal Mechanical Connectors with Streetlight option, dual rated, PVC insulated, cable range feeder outlet S/L 6-350, outlets 2, length 3-1/4 in

SHC 2

Aluminum Flood-Seal Mechanical Connectors with Streetlight option, dual rated, PVC insulated, cable range feeder outlet S/L 6-350, outlets 2, length 3-1/4 in
Aluminum Flood-Seal Multi-Port Connectors - 95 Series Terminal Kits, Heat-Shrink kit, concentric 2, compressed 2, compact 2 and 1, solid 1, die reference 5/8,BG,687,243,TU,52,8A

CFG 2 HS

Aluminum Flood-Seal Multi-Port Connectors - 95 Series Terminal Kits, Heat-Shrink kit, concentric 2, compressed 2, compact 2 and 1, solid 1, die reference 5/8,BG,687,243,TU,52,8A
Aluminum Flood-Seal Mechanical Connectors, dual rated, PVC insulated, cable range feeder outlet S/L 6-350, 14 sol.-6, outlets 2, length 3-1/4 in

SHC 21

Aluminum Flood-Seal Mechanical Connectors, dual rated, PVC insulated, cable range feeder outlet S/L 6-350, 14 sol.-6, outlets 2, length 3-1/4 in
Aluminum Flood-Seal Multi-Port Connectors - 95 Series Terminal Kits, Force-Fit kit, concentric 4, compressed 4, compact 4, die reference 5/8,BG,687,243,TU,52,8A

CFG 4 CS

Aluminum Flood-Seal Multi-Port Connectors - 95 Series Terminal Kits, Force-Fit kit, concentric 4, compressed 4, compact 4, die reference 5/8,BG,687,243,TU,52,8A
Aluminum Flood-Seal Multi-Port Connectors - 95 Series Terminal Kits, Force-Fit kit, Concentric, Compressed and Compact #6, or 16 MM2. One Outlet, Centerform Lug. 1-Hole 0.406 inch Diameter. Dies TU 52 BG 243 5/8. Kit Includes Screw and Insulating Rocket. Dual Rated for Aluminum and Copper Conductors

CFG 6 CS

Aluminum Flood-Seal Multi-Port Connectors - 95 Series Terminal Kits, Force-Fit kit, Concentric, Compressed and Compact #6, or 16 MM2. One Outlet, Centerform Lug. 1-Hole 0.406 inch Diameter. Dies TU 52 BG 243 5/8. Kit Includes Screw and Insulating Rocket. Dual Rated for Aluminum and Copper Conductors

How to Install the Multi-Seal® RAB 1/0 Series Connector

This guide provides step-by-step instructions for the safe installation and wiring of the Multi-Seal® RAB 1/0 Series connector. Ensure all safety precautions are followed, including wearing appropriate insulating gloves and working on de-energized circuits or tap conductors not under load.

Estimated time: 15m

Tools needed:

Torque wrench (80 in/lbs), Wire strippers, Cutting tool

Supplies needed:

Multi-Seal® RAB 1/0 Series connector, Electrical cable (#14 to 1/0 awg), Insulating gloves

  1. Observe Safety and Prepare Connector

    Before starting, ensure all unused cable ports are sealed. If reinstalling a cable, it must be of the same size or larger than the one removed. Follow standard safety practices for energized circuits. Wear insulating gloves rated to the appropriate voltage when working on live conductors. Tap conductors may be installed on an energized main, but they MUST NOT BE UNDER LOAD. Remove the cap from the connector if installing #2 to 1/0 awg cable; the cap is not required for these sizes.

  2. Remove the Screw Plug

    Carefully remove the screw plug from the connector.

  3. Cut Cap for Smaller Gauge Cables

    If installing #14 to #4 awg cable, cut the cap at the correct cut-off ring as indicated on the cap.

  4. Reinsert Cap

    If the cap was cut in the previous step (for #14 to #4 awg cable), reinsert it into the connector.

  5. Prepare Cable for Insertion

    Measure the required strip length by placing the cable alongside the markings on the bottom of the connector. Using appropriate wire strippers, strip the cable to this measured length.

  6. Insert Cable into Connector

    Insert the prepared cable fully into the connector. For #2 to 1/0 awg cables, insert it into the tower. For #14 to #4 awg cables, insert it into the cap until it is fully seated.

  7. Replace the Screw Plug

    Replace the screw plug into the connector, ensuring it is properly aligned.

  8. Torque the Connector

    Using a calibrated torque wrench, torque the connector to 80 in/lbs to ensure a secure and reliable electrical connection.

Frequently Asked Questions about ABB - Installation Products

How are Thomas and Betts products typically installed?

Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.

What accessories are available for Thomas and Betts products?

Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.

What environmental ratings do Thomas and Betts products have?

Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.

What communication protocols do Thomas and Betts products support?

Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.

What are the key features of Thomas and Betts products?

Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.

What are the main product lines offered by Thomas and Betts?

Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.

What technical support does Thomas and Betts offer?

Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.

What industries and applications are Thomas and Betts products used for?

Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.

What certifications and standards do Thomas and Betts products comply with?

Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.

What are the main product lines offered by Ocal?

Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.