ABB Installation Products K151SR-B2220 15/25kV 200 Amp, Deadbreak Straight Receptacle (All Copper Lug), Bails are required, but…
UPC: 783786495351
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- Voltage rating: 15/25 kV (15.2kV max phase-to-ground, 26.3kV max phase-to-phase)
- Current rating: 200 Amp continuous, 10kA sym 10-cycle momentary
- Cable insulation diameter range: 0.635 inch to 0.905 inch
- Conductor size support: AWG #2 compressed stranded to #1 solid (33.62 mm²)
- Fully shielded, submersible molded rubber housing with capacitive test point
- Deadbreak design allows safe connection/disconnection under load
- All-copper compression lug for superior conductivity and corrosion resistance
- Requires bails (ordered separately) for operation
Specifications
Amperage Rating | 200 A |
Application | Designed to connect a cable to another cable or apparatus |
Color | Black |
Conductor Range | #2 STR/COMPR AWG , #1 SOL/COMPT AWG |
Environmental Conditions | Fully Shielded, Fully Submersible |
Insulation | True |
Length | 9.54 in |
Length | 242.316 mm |
Material | Housing - EPDM-Rubber |
Special Features | Fully shielded, fully submersible molded rubber housing. 100 percent peroxide-cured construction includes insulation and conductive EPDM materials. Provision for ground wire connection. Wide cable range with minimum number of sizes. No Test Point |
Standard | ANSI/IEEE Standard 386 |
Temperature Rating, Maximum | 149 F |
Temperature Rating, Maximum | 65 C |
Temperature Rating, Minimum | -40 F |
Temperature Rating, Minimum | -40 C |
Type | Deadbreak Straight Receptacle |
Voltage Rating | 15 to 25 kV |
Width | 2.74 in |
Width | 69.596 mm |
Package Dimensions (L x W x H) | 0.01 IN x 0.01 IN x 0.01 IN |
Package Dimensions (L x W x H) | 0.0254 cm x 0.0254 cm x 0.0254 cm |
Package Weight (Imperial) | 1.0000 L |
Package Weight (Metric) | 0.4540 kg |
168FLR1-B5220
Molded Current Limiting Fuse Housing, Nominal Fuse Voltage Rating 8.3kV, Fuse Test Port - Two Capacitive Test Ports, Small Housing, Cable Insulation Diameter 0.635 inch - 0.905 inch / 16-23mm, Bi-Metal Conductor size 2 AWG Stranded/Compressed, 1 AWG Solid/Compact. no Sealing Kit
K151SP-C0220
15/25kV 200 Amp, Deadbreak Straight Plug, Bails are required, but not included, order separately. Cable Insulation Diameter 0.805 inch to 1.060 inch. Aluminum Compression Lug. Conductor Size AWG Compressed Stranded #2/Solid #1/mmSquared 33.62.K151SP-C0270
15/25kV 200 Amp, Deadbreak Straight Plug, Bails are required, but not included, order separately. Cable Insulation Diameter 0.805 inch to 1.060 inch. Aluminum Compression Lug. Conductor Size AWG Compressed Stranded 4/0 /Solid 250 /mmSquared 126.67.K151SR-C0250
15/25kV 200 Amp, Deadbreak Straight Receptacle, Bails are required, but not included, order separately. Cable Insulation Diameter 0.805 inch to 1.060 inch. Aluminum Compression Lug. Conductor Size AWG Compressed Stranded 2/0 /Solid 3/0 /mmSquared 67.43.
167DLR-H5270
200 Amp, 15kV, Loadbreak Direct Test Elbow Connector, Cable Insulation Diameter 0.850 inch to 1.050 inch. Bi-Metal Compression Lug. Conductor Size AWG Compressed Stranded 4/0 or Solid 250 or mmSquared 26.67.K151SP-C0250
200 Amp, 15/25kV, Deadbreak Elbow, Straight Plug, Bails are required but not included, order separately. Cable Insulation Diameter 0.805 inch to 1.060 inch. Aluminum Compression Lug. Conductor Size AWG Compressed Stranded 2/0 /Solid 3/0 /mmSquared 67.43.K151SR-C0230
200 Amp, 15/25kV, Deadbreak Elbow, Straight Receptacle, Bails are required but not included, order separately. Cable Insulation Diameter 0.805 inch to 1.060 inch. Aluminum Compression Lug. Conductor Size AWG Compressed Stranded #1 or Solid 1/0 or mmSquared 42.41.K151SP-C0230
200 Amp, 15/25kV, Deadbreak Elbow, Straight Plug, Bails are required but not included, order separately. Cable Insulation Diameter 0.805 inch to 1.060 inch. Aluminum Compression Lug. Conductor Size AWG Compressed Stranded #1/Solid 1/0 /mmSquared 42.41.Frequently Asked Questions
What is the voltage rating of the K151SR-B2220 receptacle?
The K151SR-B2220 receptacle has a voltage rating of 15/25 kV.
What is the current rating for this ABB deadbreak receptacle?
This ABB deadbreak receptacle has a current rating of 200 Amps.
What cable insulation diameters can this receptacle accommodate?
The K151SR-B2220 can accommodate cable insulation diameters ranging from 0.635 inch to 0.905 inch.
What conductor sizes are supported by the K151SR-B2220?
It supports AWG Compressed Stranded #2 or Solid #1 conductor sizes, equivalent to 33.62 mm².
Are bails included with the K151SR-B2220 receptacle?
No, bails are required for operation but are not included and must be ordered separately.
What type of lug material does the K151SR-B2220 use?
The K151SR-B2220 features an all-copper lug for superior conductivity.
What is the connection type of the K151SR-B2220?
The K151SR-B2220 is a deadbreak straight receptacle.
How to Install the Elastimold 151SR/K151SR Straight Receptacle
This guide provides step-by-step instructions for preparing cables, installing, and grounding the Elastimold 151SR/K151SR Straight Receptacle for high-voltage electrical connections.
Estimated time: 1h 30m
Tools needed:
Cable cutting tool, Wire strippers, Wire brush, Crimping tool, Rags
Supplies needed:
Solid dielectric type cable, Conductor Contact (male), Nylon Venting Rod, Lubricant (supplied), Crimp Chart, Approved solvent, #14 AWG copper wire (or equivalent), Elastimold bail, Silicone grease
- De-energize and Inspect Apparatus
Ensure all apparatus is de-energized before beginning installation. Inspect all parts for damage, verify ratings, and confirm compatibility with mating products. Gather all required tools and maintain cleanliness throughout the procedure.
- Prepare Cable Jacket and Shield
For jacketed concentric neutral cable, cut and remove the cable jacket 8 inches from the end, allowing sufficient neutral wires for grounding. For copper tape shield cable, cut and remove the cable jacket 7 1/2 inches from the end, then remove the copper tape shield 6 1/2 inches from the end. If using an ECS or MA grounding device, follow its specific jacket cut-back instructions.
- Prepare Conductor and Crimp Contact
Remove 7/8 to 1 inch (or 1 3/4 to 1 7/8 inches for #1 stranded/compressed and #1/0 compressed/solid aluminum cable) of cable insulation and conductive shield, cutting squarely. Wire brush bare aluminum conductors and immediately insert into the crimp barrel containing inhibitor. Crimp the socket terminal onto the bared conductor, ensuring it's fully seated. Start crimps at the crimp line and rotate each successive crimp 90 degrees. Wipe excess inhibitor from aluminum cable contacts.
- Clean Insulation and Prepare Semi-Conductive Shield
Remove the semi-conductive shield 7 9/16 to 7 5/8 inches back from the end of the pin with a straight, smooth, "squared" cut, taking care not to cut or nick the insulation. Pencil insulation 1/8 inch. Thoroughly clean the outer jacket and insulation with an approved solvent, wiping from the cable end towards the outer jacket, to remove all semi-conducting residue. If using an ECS or MA grounding device, install it now per its instructions.
- Lubricate Receptacle and Insert Cable
Remove the protective cap from the straight receptacle, keeping the cable insulation and receptacle clean. Apply the supplied lubricant sparingly to the cable and the inside of the housing. Push the cable into the housing until the base of the pin chamfer is flush with the inside face of the receptacle. If not immediately connecting, replace with an appropriate HV insulated cap or Elastimold insulating plug (K150DP), as the shipping cover is not an insulating device.
- Connect to Mating Plug (If Applicable)
Lubricate the nose of the mating plug with silicone grease. Insert the nylon rod into the receptacle face until it bottoms (approx. 1 3/4 inches), ensuring it is not cut. Insert the plug assembly into the receptacle as far as possible, then pull out the nylon rod. Secure the electrical connection with an Elastimold bail.
- Ground the Cable
If an ELASTIMOLD grounding device is not used, connect a customer-supplied length of #14 AWG (or equivalent) copper wire through the grounding tab and twist tightly. Connect this grounding assembly to the system ground by merging it with the cable shield of each cable. Seal all grounding wires and connections to prevent corrosion.
Frequently Asked Questions about ABB - Installation Products
How are Thomas and Betts products typically installed?
Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.
What accessories are available for Thomas and Betts products?
Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.
What environmental ratings do Thomas and Betts products have?
Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.
What communication protocols do Thomas and Betts products support?
Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.
What are the key features of Thomas and Betts products?
Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.
What are the main product lines offered by Thomas and Betts?
Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.
What technical support does Thomas and Betts offer?
Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.
What industries and applications are Thomas and Betts products used for?
Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.
What certifications and standards do Thomas and Betts products comply with?
Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.
What are the main product lines offered by Ocal?
Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.