ABB Installation Products K151SR-C0230 200 Amp, 15/25kV, Deadbreak Elbow, Straight Receptacle, Bails are required but not…
UPC: 783786502011
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- 200 Amp current rating for medium-voltage applications
- 15/25 kV voltage rating with deadbreak operation capability
- Aluminum compression lug for #1 AWG to 1/0 AWG conductors (42.41 mm²)
- Accepts cable insulation diameters from 0.805 to 1.060 inches
- Straight receptacle design for axial cable entry in confined spaces
Specifications
Amperage Rating | 200 A |
Application | Designed to connect a cable to another cable or apparatus |
Color | Black |
Conductor Range | #1 STR/COMPR AWG , 1/0 SOL/COMPT AWG |
Environmental Conditions | Fully Shielded, Fully Submersible |
Insulation | True |
Length | 9.54 in |
Length | 242.316 mm |
Material | Housing - EPDM-Rubber |
Special Features | Fully shielded, fully submersible molded rubber housing. 100 percent peroxide-cured construction includes insulation and conductive EPDM materials. Provision for ground wire connection. Wide cable range with minimum number of sizes. No Test Point |
Standard | ANSI/IEEE Standard 386 |
Temperature Rating, Maximum | 149 F |
Temperature Rating, Maximum | 65 C |
Temperature Rating, Minimum | -40 F |
Temperature Rating, Minimum | -40 C |
Type | Deadbreak Straight Receptacle |
Voltage Rating | 15 to 25 kV |
Width | 2.74 in |
Width | 69.596 mm |
Package Dimensions (L x W x H) | 0.01 IN x 0.01 IN x 0.01 IN |
Package Dimensions (L x W x H) | 0.0254 cm x 0.0254 cm x 0.0254 cm |
Package Weight (Imperial) | 1.0000 L |
Package Weight (Metric) | 0.4540 kg |
K656YSR-H0230
600 Amp, 15/25kV, Deadbreak, Straight Receptacle with Test Point, Cable Insulation Diameter .850 inch to 1.050 inch. Aluminum Compression Lug. Conductor Size AWG Compressed Stranded #1 or Compacted Solid 1/0.
K151SP-C0230
200 Amp, 15/25kV, Deadbreak Elbow, Straight Plug, Bails are required but not included, order separately. Cable Insulation Diameter 0.805 inch to 1.060 inch. Aluminum Compression Lug. Conductor Size AWG Compressed Stranded #1/Solid 1/0 /mmSquared 42.41.
168RLR-F5220-5240
200 Amp, 15kV, Loadbreak Replacement Elbow Connector with Test Point, Cable Insulation Diameter 0.640 inch to 0.820 inch. Bi-Metal Compression Lug, Conductor Size 220 - AWG Compressed Stranded 1/0 /Solid 2/0 /mmSquared 53.49. Repair Elbow has extended length contact and elbow housing resulting in a net gain of 8-7/8 inches in length. Includes 00400X long Bi-Metal Contact. Conductor Size 240 AWG Compressed Stranded 1/0 /Solid 2/0 /mmSquared 53.49.K151SR-C0220
200 Amp, 15/25kV, Deadbreak Elbow, Straight Receptacle, Bails are required but not included, order separately. Cable Insulation Diameter 0.805 inch to 1.060 inch. Aluminum Compression Lug. Conductor Size AWG Compressed Stranded #2 or Solid #1 or mmSquared 33.62.K151SP-B2200
200 Amp, 15/25kV, Deadbreak Elbow, Straight Plug, Bails are required but not included, order separately. Cable Insulation Diameter 0.635 inch to 0.905 inch. Includes a copper compression lug. Conductor Size AWG Compressed Stranded #4/Solid #3/mmSquared 21.14.K151SR-B0210
Straight Receptacle, 200 Amp, DeadBreak, 15/25KV, Cable Insulation Diameter 0.635 inch to 0.905 inch. Aluminum Compression Lug. Conductor Size AWG Compressed Stranded #3 or Solid #2 or mmSquared 26.67.K151SP-A0200
15/25kV 200 Amp, Deadbreak Straight Plug, Bails are required, but not included, order separately. Cable Insulation Diameter 0.575 inch to 0.740 inch. Aluminum Compression Lug. Conductor Size AWG Compressed Stranded #4/Solid #3/mmSquared 21.14.
274ELR-K-5270
25kV 200 Amp, Loadbreak Repair Elbow Connector with Test Point, Cable Insulation Diameter 1.090 inch to 1.310 inch. Bi-Metal Compression lug. Conductor Size AWG Compressed Stranded 4/0 /Solid 250 /mmSquared 126.67.Frequently Asked Questions
What is the K151SR Deadbreak Straight Receptacle used for?
It is a fully shielded, submersible connector designed to connect a cable to another cable or apparatus, requiring an appropriate Elastimold® mating product.
What standards does the K151SR Deadbreak Straight Receptacle meet?
The K151SR Deadbreak Straight Receptacle meets ANSI/IEEE Standard 386, Latest Revision.
What is the impulse withstand rating for the 15kV voltage class?
For the 15kV voltage class, the impulse withstand (BIL) is 95kV (1.2 x 50 microsecond wave).
What items are included in the K151SR kit?
Each kit contains one straight receptacle housing, one receptacle pin connector, one tube of lubricant, installation instructions, and a crimp chart.
What is the maximum phase-to-ground operating voltage for 25kV systems?
For 25kV voltage class systems, the maximum phase-to-ground operating voltage is 15.2kV.
What is the maximum phase-to-ground operating voltage for 15kV systems?
For 15kV voltage class systems, the maximum phase-to-ground operating voltage is 8.3kV.
What cable insulation diameters are compatible with the K151SR?
The K151SR is compatible with cable insulation diameters ranging from .575 inches through 1.220 inches.
What conductor sizes can the K151SR accommodate?
The K151SR can accommodate conductor sizes from No. 4 solid through 4/0 stranded.
What is the continuous current rating of the K151SR?
The K151SR Deadbreak Straight Receptacle has a continuous current rating of 200 Amps for both 15kV and 25kV voltage classes.
What are the voltage ratings for the K151SR receptacle?
The K151SR is suitable for use on both 15kV and 25kV systems, with specific operating voltage limits for each class.
How to Install the 151SR/K151SR Straight Receptacle
This guide provides detailed instructions for installing the Elastimold 151SR/K151SR straight receptacle, designed to connect solid dielectric type cables or electrical apparatus. Ensure all apparatus are de-energized before beginning installation.
Estimated time: 1h
Tools needed:
Wire strippers, Wire brush, Crimping tool, Rag, Approved solvent, Nylon Venting Rod, Elastimold bail
Supplies needed:
Straight Receptacle (K151SR/151SR), Conductor Contact (male), Lubricant (supplied with product), Crimp barrel (contains inhibitor), Copper wire (#14 AWG or equivalent, customer supplied), Silicone grease (for mating plug), Elastimold Insulating Plug (K150DP, optional)
- Prepare the Cable Jacket and Shield
For jacketed concentric neutral cable: Cut and remove the cable jacket 8 inches from the cable end. Ensure sufficient concentric neutral wires are left for grounding. For copper tape shield cable: Cut and remove the cable jacket 7 1/2 inches from the cable end. Then, remove the copper tape shield 6 1/2 inches from the cable end. Safety Note: All apparatus must be de-energized during this process.
- Prepare the Conductor and Insulation
Remove 7/8 to 1 inch (or 1 3/4 to 1 7/8 inches for #1 stranded/compr. and #1/0 comp./solid aluminum cable) of cable insulation and conductive shield. Wire brush bare aluminum conductors immediately. Insert the prepared conductor into the crimp barrel, which contains inhibitor, ensuring it is fully seated. Cut the conductor squarely; do not pencil the cut.
- Crimp the Socket Terminal
Crimp the socket terminal onto the bared conductor. Start crimps at the crimp line imprinted on the barrel and rotate each successive crimp or indent 90 degrees. If using aluminum cable, carefully wipe any excess inhibitor from the contact and cable insulation.
- Trim and Clean the Semi-Conductive Shield
Remove the semi-conductive shield to a point 7 9/16 to 7 5/8 inches back from the end of the pin with a straight, smooth, "squared" cut. Do not cut or nick the insulation. Pencil the insulation 1/8 inch. Thoroughly clean the outer jacket and insulation with a rag wet with an approved solvent to remove all traces of semi-conducting residue. Always wipe from the end of the cable toward the outer jacket.
- Lubricate and Insert Cable into Receptacle
Remove the protective cap from the straight receptacle, keeping the cable insulation and receptacle clean. Apply the supplied lubricant sparingly to the cable as shown in the instructions and to the inside of the housing. Do not substitute lubricants. Push the cable into the housing until the base of the pin chamfer is flush with the inside face of the receptacle. Important: If the receptacle is not to be immediately connected, replace the protective cover (for dirt protection only). For insulation, obtain an Elastimold Insulating Plug (K150DP).
- Connect to a Mating Plug (If Applicable)
Lubricate the nose of the mating plug with silicone grease. Place the nylon rod into the receptacle face until it bottoms (approximately 1 3/4 inches). Exercise care to ensure the nylon rod is not cut during mating. Insert the plug assembly into the receptacle as far as possible. Pull out the nylon rod. Secure the electrical connection with the aid of an Elastimold bail.
- Ground the Cable
If an ELASTIMOLD grounding device is not being used, connect a length of #14 AWG (or equivalent) copper wire (customer supplied) through the grounding tab and twist tightly. Connect the grounding assembly of the connector to the system ground by merging it with the cable shield of each cable. Seal the grounding wires and connections to prevent corrosion.
Frequently Asked Questions about ABB - Installation Products
How are Thomas and Betts products typically installed?
Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.
What accessories are available for Thomas and Betts products?
Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.
What environmental ratings do Thomas and Betts products have?
Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.
What communication protocols do Thomas and Betts products support?
Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.
What are the key features of Thomas and Betts products?
Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.
What are the main product lines offered by Thomas and Betts?
Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.
What technical support does Thomas and Betts offer?
Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.
What industries and applications are Thomas and Betts products used for?
Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.
What certifications and standards do Thomas and Betts products comply with?
Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.
What are the main product lines offered by Ocal?
Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.