Authorized ABB Distributor (Installation Products)
ABB - Installation Products RAB 1/0-10 - Aluminum Flood-Seal, Multi-Port Connector, RAB 1/0 Series, Conductor Range #14 - 1/0. Santoprene Coated. RUS Accepted. Total Outlets 10. Length 8-1/2 inch. Includes Caps and Screws.

ABB Installation Products RAB 1/0-10 Aluminum Flood-Seal, Multi-Port Connector, RAB 1/0 Series, Conductor Range #14 - 1/0.…

UPC: 783786744862


Documents & Media
Installation InstructionsManufacturer Product Website

Contact for Pricing

Minimum Qty: 25

Multiplier: 25

*Contact for lower quantities*

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

The ABB RAB 1/0-10 is a multi-port aluminum flood-seal connector designed for reliable electrical installations. This connector supports conductor sizes from #14 to 1/0 AWG, making it versatile for branch circuit and feeder applications. The Santoprene coating provides environmental resistance, protecting against moisture, chemicals, and abrasion. With 10 total outlets, it accommodates multiple branch connections in a single unit, reducing installation time and complexity. The RAB 1/0-10 is 8.5 inches in length and includes caps and screws for secure termination. It is RUS accepted, ensuring compliance with utility and regulatory standards. The aluminum construction offers a balance of strength and conductivity, while the flood-seal design prevents water ingress, enhancing long-term reliability. Ideal for industrial, commercial, and utility applications, this connector is suitable for panelboards, junction boxes, and distribution systems where space efficiency and durability are critical. The included hardware streamlines installation, while the flood-seal design minimizes the risk of corrosion and electrical faults.
  • Aluminum construction for strength and conductivity
  • Santoprene coating for environmental resistance
  • Supports conductor sizes #14 to 1/0 AWG
  • 10 total outlets for multi-branch connections
  • 8.5" length with included caps and screws

Specifications

Application
Dual-Rated Connector
Color
Black
Conductor Range
#14 to 1/0 AWG
Connection
Mechanical
Connection Type
Multi-Port Connector
Connection Type
Screw Terminal
Environmental Conditions
Waterproof
Insulation
yes
Material
6061-T6 Aluminum Connector, Santoprene Body
Material
Aluminum, Santoprene
Number of Poles
10
Poles
10 Outlets
Series
RAB 1/0
Size
8.5 Inch
Size
8-1/2 inch
Special Features
High Performance, Dual Rated Connectors
Standard
RUS Accepted
Type
Aluminum Flood-Seal Multi-Port Connector RAB 1/0 Series
Package Dimensions (L x W x H)
0.01 IN x 0.01 IN x 0.01 IN
Package Dimensions (L x W x H)
0.0254 cm x 0.0254 cm x 0.0254 cm
Package Weight (Imperial)
1.0000 L
Package Weight (Metric)
0.4540 kg
Multi Seal, Aluminum Insulated Bus Connector, #14 - 1/0, Aluminum and Copper, Three Conductor, Orange Plug instead of Black

RAB 1/0-3 OP

Multi Seal, Aluminum Insulated Bus Connector, #14 - 1/0, Aluminum and Copper, Three Conductor, Orange Plug instead of Black
Aluminum Flood-Seal Multi-Port Connectors - RAB 1/0 Series, length 3-7/16 in outlets 4

RAB 1/0-31

Aluminum Flood-Seal Multi-Port Connectors - RAB 1/0 Series, length 3-7/16 in outlets 4
Aluminum Flood-Seal, Multi-Port Connector, RAB 1/0 Series, Conductor Range #14 - 1/0. Santoprene Coated. RUS Accepted. Total Outlets 4. Length 3-17/32 inch. Includes Caps and Screws.

RAB 1/0-4

Aluminum Flood-Seal, Multi-Port Connector, RAB 1/0 Series, Conductor Range #14 - 1/0. Santoprene Coated. RUS Accepted. Total Outlets 4. Length 3-17/32 inch. Includes Caps and Screws.
Aluminum Flood-Seal Multi-Port Connectors - RAB 1/0 Series, length 2-39/64 inch, outlets 3, 2 on one side, 1 on the other.

RAB 1/0-21

Aluminum Flood-Seal Multi-Port Connectors - RAB 1/0 Series, length 2-39/64 inch, outlets 3, 2 on one side, 1 on the other.
Aluminum Flood-Seal, Multi-Port Connector, RAB 1/0 Series, Conductor Range #14 - 1/0. Santoprene Coated. RUS Accepted. Total Outlets 2. Length 1-3/4 inch. Includes Caps and Screws.

RAB 1/0-2

Aluminum Flood-Seal, Multi-Port Connector, RAB 1/0 Series, Conductor Range #14 - 1/0. Santoprene Coated. RUS Accepted. Total Outlets 2. Length 1-3/4 inch. Includes Caps and Screws.
Aluminum Flood-Seal, Multi-Port Connector, RAB 1/0 Series, Conductor Range #14 - 1/0. Santoprene Coated. RUS Accepted. Total Outlets 5 - alternating with 3 on one side and 2 on the other side. Length 4-25/64 inch. Includes Plugs, Caps and Screws.

RAB 1/0-32

Aluminum Flood-Seal, Multi-Port Connector, RAB 1/0 Series, Conductor Range #14 - 1/0. Santoprene Coated. RUS Accepted. Total Outlets 5 - alternating with 3 on one side and 2 on the other side. Length 4-25/64 inch. Includes Plugs, Caps and Screws.
Aluminum Flood-Seal Multi-Port Connectors - RAB 1/0 Series, length 3-7/16 inch, outlets 4, two on each side

RAB 1/0-22

Aluminum Flood-Seal Multi-Port Connectors - RAB 1/0 Series, length 3-7/16 inch, outlets 4, two on each side
Aluminum Flood-Seal, Multi-Port Connector, RAB 1/0 Series, Conductor Range #14 - 1/0. Santoprene Coated. RUS Accepted. Total Outlets 3. Length 2-39/64 inch. Includes Caps and Screws.

RAB 1/0-3

Aluminum Flood-Seal, Multi-Port Connector, RAB 1/0 Series, Conductor Range #14 - 1/0. Santoprene Coated. RUS Accepted. Total Outlets 3. Length 2-39/64 inch. Includes Caps and Screws.

How to Install the Multi-Seal® RAB 1/0 Series Connector

This guide provides step-by-step instructions for safely installing the Multi-Seal® RAB 1/0 Series connector. Installation must be performed by trained installers following all applicable local, state, and national electrical codes, installation standards, and safety rules due to the danger of electric shock.

Estimated time: 15m

Tools needed:

Wire strippers, Torque wrench, Insulating gloves

Supplies needed:

Electrical cable

  1. Observe Safety and Prepare Connector

    Before beginning any work, ensure all unused cable ports are sealed. If reinstalling a cable, it must be of the same size or larger than the one removed. Always follow standard safety practices, wear insulating gloves rated to the appropriate voltage when working on live conductors, and ensure tap conductors are not under load if installed on an energized main. Remove the screw plug from the connector.

  2. Prepare Connector Cap (if applicable)

    For #14 to #4 AWG cables, remove the cap and cut it at the correct cut-off ring. Then, reinsert the cap into the connector. Note that the cap is not required for #2 to 1/0 AWG cables.

  3. Strip Cable to Proper Length

    Measure the required strip length by placing the cable alongside the markings on the bottom of the connector. Using wire strippers, carefully strip the cable insulation to the measured length.

  4. Insert Cable into Connector

    Insert the prepared cable into the appropriate part of the connector. For #2 to 1/0 AWG cables, insert into the tower. For #14 to #4 AWG cables, insert into the cap. Push the cable until it is fully seated.

  5. Replace Plug and Torque Connector

    Replace the screw plug into the connector. Using a torque wrench, tighten the connector to 80 in/lbs. This ensures a secure electrical connection and proper sealing.

Frequently Asked Questions about ABB - Installation Products

How are Thomas and Betts products typically installed?

Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.

What accessories are available for Thomas and Betts products?

Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.

What environmental ratings do Thomas and Betts products have?

Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.

What communication protocols do Thomas and Betts products support?

Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.

What are the key features of Thomas and Betts products?

Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.

What are the main product lines offered by Thomas and Betts?

Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.

What technical support does Thomas and Betts offer?

Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.

What industries and applications are Thomas and Betts products used for?

Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.

What certifications and standards do Thomas and Betts products comply with?

Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.

What are the main product lines offered by Ocal?

Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.