Authorized ABB Distributor (Installation Products)
ABB - Installation Products R2T35M2-H0330-B1 - Ranger2 Termination for 35KV outdoor application, cable insulation diameter .84 - 1.38 inches for Tape Shield, Wire Shield, and Unshielded Cable, includes Aluminum 1-Hole Spade connector for #2-500 kcmil, Stranded or Compressed 500/ Compact or Solid 600 . Stainless Steel Mounting Bracket .80 inch - 1.25 inch (20-35mm)

ABB Installation Products R2T35M2-H0330-B1 Ranger2 Termination for 35KV outdoor application, cable insulation diameter .84 - 1.38…

UPC: 783786018710


Documents & Media
Installation InstructionsSpecification SheetManufacturer Product Website

Contact for Pricing

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

The ABB Ranger2 35kV Outdoor Cable Termination (SKU: R2T35M2-H0330-B1) is engineered for reliable medium-voltage power distribution in outdoor environments. This termination system is designed for 35kV applications and accommodates cable insulation diameters ranging from 0.84 to 1.38 inches (21.3 mm to 35 mm). It is compatible with tape shield, wire shield, and unshielded cable types. The included aluminum 1-hole spade connector supports conductor sizes from #2 AWG to 500 kcmil for stranded or compressed conductors, and up to 600 kcmil for solid conductors. The Ranger2 termination utilizes shrink-fit technology and a pull-down jacket seal for efficient field installation. Its non-tracking silicone housing offers superior memory and weathering resistance, featuring eight sheds for enhanced creepage and strike distances on the 35kV outdoor model. The field-removable center core simplifies installation, and the unit can be installed in restricted spaces. A stainless steel mounting bracket, adjustable for 0.80–1.25 inch (20-35mm) outside diameters, provides stable, corrosion-resistant mounting. The termination is rated for ambient temperatures from -22°F to +149°F (-30°C to +65°C) and altitudes up to 3,300 feet (1,005m). This termination is ideal for utility, industrial, and commercial power distribution networks requiring dependable medium-voltage cable termination in challenging outdoor conditions. Manufacturer: ABB - Installation Products.
  • 35kV outdoor cable termination for tape shield, wire shield, and unshielded cables.
  • Accommodates cable insulation diameters from 0.84" to 1.38" (21.3 mm to 35 mm).
  • Includes aluminum 1-hole spade connector for #2 AWG to 500 kcmil (stranded/compressed) and 600 kcmil (solid) conductors.
  • Non-tracking silicone housing with eight sheds for enhanced creepage and strike distances.
  • Stainless steel mounting bracket adjustable for 0.80" - 1.25" (20-35mm) O.D.
  • Eight sheds for superior creepage and strike distances
  • Non-tracking silicone housing with weathering resistance
  • Field-removable center core for simplified installation
  • Rated for ambient temperatures from -22°F to +149°F (-30°C to +65°C)
  • IEEE Class 1A outdoor classification

Specifications

Application
Cable Termination, Outdoor Application, 35kV
Cable Type
Copper Tape Shielded Wire
Color
Gray
Conductor Size
500 to 600 kcmil
Connection Type
1-Hole Spade
Earthing
Products Includes Their Own Grounding System
Material
Aluminum, Stainless Steel
Mounting
Product Need to have Cable Holder (not included)
Mounting Type
Stainless Steel Mounting Bracket (0.80-1.25 inch)
Number Of Terminals
(1) Single Phase
Series
Ranger2
Size
0.84-1.38 inch insulation, #2-500 kcmil (stranded/compressed) / 600 kcmil (solid)
Special Features
Silicone Rubber Housing. Lightweight, Compact Design. Pull-Down Tabs for Easy Installation. Thick Wall Construction
Standard
IEEE 48
Type
Cable Termination - Outdoor - Ranger2
Voltage Rating
35 kV
Package Dimensions (L x W x H)
0.01 IN x 0.01 IN x 0.01 IN
Package Dimensions (L x W x H)
0.0254 cm x 0.0254 cm x 0.0254 cm
Package Weight (Imperial)
1.0000 L
Package Weight (Metric)
0.4540 kg
Ranger2 Termination for 35KV outdoor application, cable insulation diameter .84 - 1.38 inches for Cable Type - Tape Shield, Wire Shield, and Unshielded Cable, Copper 2-Hole Spade #2-1250kcmil, Stranded or Compressed 500/ Compact or Solid 600 .

R2T35M4N2330

Ranger2 Termination for 35KV outdoor application, cable insulation diameter .84 - 1.38 inches for Cable Type - Tape Shield, Wire Shield, and Unshielded Cable, Copper 2-Hole Spade #2-1250kcmil, Stranded or Compressed 500/ Compact or Solid 600 .
Ranger2 Termination for 15KV indoor application, cable insulation diameter .64 - 1.12 inches for Tape Shield, Wire Shield, and Unshielded Cable, includes Aluminum 2-Hole Spade connector for #2 to 1250 kcmil. #1 Stranded or 1/0 Solid. #2 Solid.

R2IT15M1-N0210

Ranger2 Termination for 15KV indoor application, cable insulation diameter .64 - 1.12 inches for Tape Shield, Wire Shield, and Unshielded Cable, includes Aluminum 2-Hole Spade connector for #2 to 1250 kcmil. #1 Stranded or 1/0 Solid. #2 Solid.
Ranger2 Termination for 35KV outdoor application, cable insulation diameter 1.30 - 2.10 inches for Concentric Neural and Jacketed Concentric Neutral Cable, includes Universal Aluminum Barrel For Aluminum or Copper Conductor with copper wire lead #2-4/0, Stranded or Compressed 4/0 /Compact or Solid 250, Stainless Steel Mounting Bracket 1.45 inch - 1.95 inch

R2T35J4-T0270-B3

Ranger2 Termination for 35KV outdoor application, cable insulation diameter 1.30 - 2.10 inches for Concentric Neural and Jacketed Concentric Neutral Cable, includes Universal Aluminum Barrel For Aluminum or Copper Conductor with copper wire lead #2-4/0, Stranded or Compressed 4/0 /Compact or Solid 250, Stainless Steel Mounting Bracket 1.45 inch - 1.95 inch
Ranger2 Termination for 15KV outdoor application, cable insulation diameter .84 - 1.38 inches for Concentric Neural and Jacketed Concentric Neutral Cable, includes Universal Aluminum Barrel For Aluminum or Copper Conductor with copper wire lead #2-4/0, Stranded or Compressed 4/0/ Compact or Solid 250. Plated Mild Steel Mounting Bracket 1.10 inch - 1.50 inch (28-38mm)

R2T15J2-T0270-B2

Ranger2 Termination for 15KV outdoor application, cable insulation diameter .84 - 1.38 inches for Concentric Neural and Jacketed Concentric Neutral Cable, includes Universal Aluminum Barrel For Aluminum or Copper Conductor with copper wire lead #2-4/0, Stranded or Compressed 4/0/ Compact or Solid 250. Plated Mild Steel Mounting Bracket 1.10 inch - 1.50 inch (28-38mm)
Ranger2 Termination for 15KV indoor application, cable insulation diameter .64 - 1.12 inches for Cable Type - Tape Shield, Wire Shield, and Unshielded, Conductor Code - 220 -Stranded or Compressed #2, Compact or Solid #1, includes Aluminum 2-Hole Spade connector for 1250 kcmil

R2IT15M1N0220

Ranger2 Termination for 15KV indoor application, cable insulation diameter .64 - 1.12 inches for Cable Type - Tape Shield, Wire Shield, and Unshielded, Conductor Code - 220 -Stranded or Compressed #2, Compact or Solid #1, includes Aluminum 2-Hole Spade connector for 1250 kcmil
Ranger2 Termination for 35KV outdoor application, cable insulation diameter .84 - 1.38 inches for Cable Type - Tape Shield, Wire Shield, and Unshielded Cable, includes Aluminum 2-Hole Spade connector for #2-1250 kcmil, Stranded or Compressed 1000

R2T35M4N0410

Ranger2 Termination for 35KV outdoor application, cable insulation diameter .84 - 1.38 inches for Cable Type - Tape Shield, Wire Shield, and Unshielded Cable, includes Aluminum 2-Hole Spade connector for #2-1250 kcmil, Stranded or Compressed 1000
Ranger2 Termination for 35KV outdoor application, cable insulation diameter .84 - 1.38 inches for Cable Type - Tape Shield, Wire Shield, and Unshielded Cable, includes Aluminum 2-Hole Spade connector for #2-1250 kcmil, Stranded or Compressed 650 /Compact or Solid 750

R2T35M4N0350

Ranger2 Termination for 35KV outdoor application, cable insulation diameter .84 - 1.38 inches for Cable Type - Tape Shield, Wire Shield, and Unshielded Cable, includes Aluminum 2-Hole Spade connector for #2-1250 kcmil, Stranded or Compressed 650 /Compact or Solid 750
Ranger2 Termination for 35KV outdoor application, cable insulation diameter .84 - 1.38 inches for Cable Type - Tape Shield, Wire Shield, and Unshielded Cable, includes Aluminum 2-Hole Spade connector for #2-1250 kcmil, Stranded or Compressed 500 /Compact or Solid 600

R2T35M4N0330

Ranger2 Termination for 35KV outdoor application, cable insulation diameter .84 - 1.38 inches for Cable Type - Tape Shield, Wire Shield, and Unshielded Cable, includes Aluminum 2-Hole Spade connector for #2-1250 kcmil, Stranded or Compressed 500 /Compact or Solid 600

Frequently Asked Questions

What is the maximum voltage rating for this ABB termination?

The ABB Ranger2 termination is rated for 35 kV applications.

What cable insulation diameters does this termination support?

This termination supports cable insulation diameters ranging from 0.84 to 1.38 inches.

What conductor sizes can the aluminum spade connector accommodate?

The aluminum 1-hole spade connector is suitable for #2-500 kcmil stranded or compressed cable, and 600 kcmil solid cable.

What type of cables is this termination compatible with?

This termination is compatible with tape shield, wire shield, and unshielded cable types.

What are the dimensions for the stainless steel mounting bracket?

The stainless steel mounting bracket is adjustable for diameters between 0.80 inches and 1.25 inches (20-35mm).

How to Install the R2T35M 35kV Shrink Fit Silicone Rubber Termination

This guide provides step-by-step instructions for the safe and proper installation of the R2T35M 35kV Ranger 2 Shrink Fit Silicone Rubber Termination on various shielded cables, including preparation, grounding, and termination installation.

Estimated time: 1h 30m

Tools needed:

Crimping tool, Cable knife or wire strippers, Vinyl tape, Approved solvent, Aluminum oxide abrasive (grit 120 or finer, optional), Soldering iron (if required for ground braid)

Supplies needed:

2 Silicone Rubber Termination Halves, Lubricant, Gray Silicone Rubber Tape, Constant Force Spring, Preformed Ground Braid, Sealing Mastic, Copper Foil Tape (for tape shield cables), Gloves, Connector/Lug, Cable (Tape shield, Wire shield, or UniShield)

  1. Prepare Cable for Termination

    Check cable size against the termination selection chart. DANGER: De-energize all apparatus before proceeding. Train and cut the cable to the required length. Prepare the cable jacket, semi-conductive layer, and insulation according to specified dimensions, allowing for terminal lug depth and aluminum lug growth. For tape shield cables, secure the tape shield edge with copper foil tape. For wire shield cables, bend leading shield wires back to the jacket edge. For UniShield cables, follow specific instructions for shield wire and semi-conductive jacket removal.

  2. Install Grounding Components

    Apply a band of sealing mastic around the cable jacket, 1/4" (6mm) from the jacket end; this also serves as a termination positioning marker. Position the preformed ground braid with its short tail over the cable shield and the solder block centered over the mastic strip. Secure the ground braid to the cable jacket using vinyl tape and press the solder block into the mastic. Apply a second mastic band over the solder block and the first mastic. Wrap two half-lapped layers of vinyl tape around the mastic seal. Wrap the ground braid around the cable shield one complete wrap, trim excess, and secure it in place with the constant force spring. Cinch the spring and secure it with two wraps of vinyl tape. IMPORTANT: If the cable has cloth or paper semi-conductive shields, overwrap the shield with one half-lapped layer of highly stretched semi-conductive rubber tape.

  3. Install Lug or Connector and Clean Cable

    Ensure the termination assembly fits over the selected lug. If the lug will not fit, slide the termination onto the cable *before* installing the lug. Position the connector/lug and crimp it according to the manufacturer's directions, leaving the last 3/8" to 1/2" uncrimped. Remove any excess oxide inhibitor and all sharp crimp flashings or edges. Wipe the cable insulation with an approved solvent, avoiding contact with the semi-conductive insulation shield. If necessary, use aluminum oxide abrasive (grit 120 or finer) on the insulation only, ensuring not to reduce the cable insulation diameter.

  4. Mount the Termination Body

    Create a track-resistant moisture seal at the base of the terminal lug using gray silicone rubber electrical tape. Wrap 1-2 layers, or build up to the cable primary insulation diameter if the lug barrel is smaller. Apply a liberal coating of silicone grease to the edge of the semi-conductive insulation shield to fill the step at the cut-off. For the lower termination with a fold-down skirt, pull the loose end of the removable core through the top until it is flush with the bottom of the termination. Slide the termination body onto the cable, aligning it with the forward edge of the mastic seal. Carefully remove the core by unwinding it counter-clockwise, starting with the loose end. Ensure the termination body is butted against the leading edge of the mastic seal. Do not push or pull the termination assembly during core removal. If installing a second termination housing, pull its core down within one coil of the bottom, slide it over the cable, and carefully pull the core counterclockwise, overlapping the first termination by 1-1/2" (40mm).

  5. Finalize Sealing and Ground Connection

    Apply a thin film of silicone lubricant to the skirt and mastic seal area, avoiding skirt tabs. Carefully fold down the skirt over the mastic seal. Complete the lug area moisture seal using the remaining gray silicone rubber electrical tape. Overlap the termination insulator by approximately 1" and extend the tape over a non-crimped region of the lug/connector barrel with a half-lap configuration. Connect the ground braid to the system ground. For wire shielded cables, twist concentric neutral wires together and connect them to system ground. Confirm that the High-K step does not exceed 1.5".

Frequently Asked Questions about ABB - Installation Products

How are Thomas and Betts products typically installed?

Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.

What accessories are available for Thomas and Betts products?

Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.

What environmental ratings do Thomas and Betts products have?

Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.

What communication protocols do Thomas and Betts products support?

Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.

What are the key features of Thomas and Betts products?

Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.

What are the main product lines offered by Thomas and Betts?

Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.

What technical support does Thomas and Betts offer?

Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.

What industries and applications are Thomas and Betts products used for?

Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.

What certifications and standards do Thomas and Betts products comply with?

Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.

What are the main product lines offered by Ocal?

Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.