
ABB Installation Products R2T35M2-H0250 Outdoor Ranger2 Cable Termination. 35kV, Cable Type - Tape Shield/Wire Shield/UniShield.…
UPC: 075114407229
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- 35 kV Voltage Rating for outdoor medium-voltage applications
- Accommodates cable insulation diameters from 0.84" (21.3 mm) to 1.38"
- Aluminum 1-hole spade connector for #2 AWG to 500 kcmil conductors
- Non-tracking silicone housing with superior memory and weathering characteristics
- Eight sheds for enhanced creepage and strike distances
Specifications
Application | Cable Termination, Outdoor Application, 35kV |
Color | Gray |
Conductor Size | #2 to 500 kcmil |
Connection Type | Tape Shield/Wire Shield/UniShield |
Earthing | Products Includes Their Own Grounding System |
Material | Aluminum |
Mounting | Product Need to have Cable Holder (not included) |
Number Of Terminals | (1) Single Phase |
Series | Ranger2 |
Size | 0.84 inch - 1.38 inch |
Special Features | Silicone Rubber Housing. Lightweight, Compact Design. Pull-Down Tabs for Easy Installation. Thick Wall Construction |
Standard | IEEE 48 |
Type | Cable Termination - Outdoor - Ranger2 |
Voltage Rating | 35 kV |
Package Dimensions (L x W x H) | 0.01 IN x 0.01 IN x 0.01 IN |
Package Dimensions (L x W x H) | 0.0254 cm x 0.0254 cm x 0.0254 cm |
Package Weight (Imperial) | 1.0000 L |
Package Weight (Metric) | 0.4540 kg |

R2T35J2-N0270
Ranger2 Termination. Type - Outdoor, 35kV, Cable Type - Concentric Neutral/Jacketed Concentric Neutral, Insulation Range - .84 inch - 1.38 inch, Connector Type - Aluminum 2-Hole Spade #2-1250 kcmil, Conductor Code - 270 -Stranded or Compressed 4/0 Compact or Solid 250.
R2T35M4-N0380
Outdoor Ranger2 Cable Termination. 35kV, Cable Type - Tape Shield/Wire Shield/UniShield. Insulation Range - 1.30 inch - 2.10 inch. Aluminum 2-Hole Spade #2-1250 kcmil, Conductor 750 kcmil Stranded/Compressed or 900 kcmil Compact/Solid
R2T28J4N2330-B3
Ranger2 Termination for 25/28 kV Outdoor Application, Cable Insulation Diameter 1.30 - 2.10 inches for Concentric Neural and Jacketed Concentric Neutral Cable, includes Copper 2-Hole Spade connector for #2-1250 kcmil, Stranded or Compressed 500 kcmil or Compact Solid 600 kcmil. Stainless Steel Mounting Bracket 1.45 inch - 1.95 inch (37-50mm)
R2T15M4-N2400-B3
Ranger2 Termination for 15KV outdoor application, cable insulation diameter 1.30 - 2.10 inches for Cable Type - Tape Shield/Wire Shield/Unshield Cable, Copper 2-Hole Spade #2-1250kcmil, Stranded or Compressed 900 /Compact or Solid 1000. - Cable Mounting Bracket - Stainless Steel, 1.45 inch - 1.95 inch (37-50mm)
R2T15J4-N0380-B4
Ranger2 Termination for 15KV outdoor application, cable insulation diameter 1.30 - 2.10 inches for Concentric Neural and Jacketed Concentric Neutral Cable, includes Aluminum 2-Hole Spade connector for #2-1250 kcmil, Wire Size Stranded or Compressed 750 kcmil / Compact or Solid 900 kcmil. Stainless Steel Mounting Bracket 1.80 inch - 2.40 inch (45-61mm)
R2T15J2-N2360-B3
Ranger2 Termination, Outdoor, 15kv, Cable Type - Concentric Neutral/Jacketed Concentric Neutral, Insulation Range - .84 inch - 1.38 inch (21mm-35mm), Connector Type - N2 - Copper 2-Hole Spade #2-1250 kcmil, 650 Stranded/Compressed or 750 Compact/Solid, B3 - Cable Mounting Bracket - Stainless Steel - 1.45 inch - 1.95 inch (37-50mm)
R2T15J4-N2440
Ranger2 Termination for 15KV outdoor application, cable insulation diameter 1.30 - 2.10 inches for Concentric Neural and Jacketed Concentric Neutral Cable, Tinned Copper 2-Hole Spade #2-1250kcmil, Stranded or Compressed 1250 kcmil.
R2T35M2H0240
Outdoor Ranger2 Cable Termination. 35kV, Cable Type - Tape Shield/Wire Shield/UniShield. Insulation Range - .84 inch - 1.38 inch. Aluminum 1-Hole Spade #2-500 kcmil, Conductor 1/0 Stranded/Compressed AWG or 2/0 Compact/Solid AWGFrequently Asked Questions
What cable insulation diameters does the R2T35 termination cover?
The R2T35 termination covers insulation diameters from 0.84 inches (21.3 mm) to 2.10 inches (53 mm).
What is the power system frequency range for this termination?
The R2T35 termination is designed for a power system frequency range of 48 to 62 Hz.
What is the creepage distance for the R2T35 termination?
The creepage distance for the R2T35 termination is 30.0 inches (762 mm).
What is the minimum strike distance for the R2T35 termination?
The minimum strike distance for the R2T35 termination is 16.8 inches (427 mm).
What is the maximum altitude for R2T35 termination installation?
The R2T35 termination can be installed at a maximum altitude of 3300 feet (1005 m).
What is the operating ambient temperature range for the R2T35?
The R2T35 termination operates within an ambient temperature range of -22 to +149 °F (-30 to +65 °C).
What is the maximum design voltage to ground for R2T35?
The maximum design voltage to ground for the R2T35 termination is 22 kV.
What is the voltage rating of the R2T35 cable termination?
The R2T35 cable termination has a voltage rating of 35 kV.
What cable sizes are compatible with the R2T35 termination?
The R2T35 termination accommodates cable sizes from #2 AWG through 1250 kcmil.
What is the IEEE classification for the R2T35 outdoor termination?
The R2T35 outdoor termination has an IEEE Classification of Class 1A.
How to Install the R2T35M2 35kV Shrink-Fit Silicone Rubber Termination for Tape Shielded Cables
This guide provides step-by-step instructions for installing the 35kV Ranger 2 Shrink-Fit Silicone Rubber Termination (R2T35M2) on tape shielded cables, including cable preparation, ground braid installation, and termination application.
Estimated time: 1h 30m
Tools needed:
Wire strippers, Crimping tool, Approved solvent, Aluminum oxide abrasive (grit 120 or finer, if needed), Vinyl tape
Supplies needed:
R2T35M2 Termination Kit (includes: 2 Silicone Rubber Termination Halves, Lubricant, 2 Strips Gray Silicone Rubber Tape, Constant Force Spring, Preformed Ground Braid, 2 Strips Sealing Mastic, 1 Strip Copper Foil Tape, 2 Gloves), Terminal lug or connector, Cable Support Bracket (optional), System ground connection materials
- Prepare Cable and De-energize System
DANGER: All apparatus must be de-energized during installation or removal of parts. Failure to follow instructions will result in serious or fatal injury. Before starting, ensure all apparatus is de-energized. Verify the cable size fits the termination's insulation range. Train the cable and cut to length. Prepare the cable using the specified dimensions, allowing for terminal lug depth and aluminum lug growth. Secure the tape shield with a single wrap of the supplied copper foil tape.
- Install Ground Braid
Apply the first mastic band (50% stretch) 1/4 inch (6mm) from the jacket end. Position the preformed ground braid with the short tail over the tape shield and the solder block centered on the mastic. Secure the ground braid to the cable jacket with vinyl tape and press the solder block into the mastic. Apply a second mastic band over the solder block. Wrap two half-lapped layers of vinyl tape over the mastic seal. Wrap the ground braid around the cable tape shield, trim excess, and secure with the constant force spring, cinching it after the final winding. Secure the spring with two wraps of vinyl tape.
- Install Lug or Connector
Check that the termination assembly fits over the selected lug. If not, clean the insulation and slide the termination onto the cable before lug installation. Position the connector or lug and crimp according to the manufacturer's directions, leaving the last 3/8 to 1/2 inch uncrimped. Remove any excess oxide inhibitor and all sharp crimp flashings.
- Clean Cable Insulation and Lug Barrel
Wipe the cable insulation with an approved solvent, ensuring it does not touch the semi-conductive insulation shield. If abrasive is needed, use only aluminum oxide (grit 120 or finer) on the insulation, taking care not to reduce the cable insulation diameter.
- Install Termination Body (Part 1: Initial Placement)
Create a track-resistant moisture seal between the termination insulator and the lug/connector using gray silicone rubber electrical tape. Wrap a band around the base of the terminal lug, adjusting layers based on barrel diameter. Liberally coat the edge of the semi-conductive insulation shield with silicone grease. For the lower termination, pull the loose end of the removable core through the top until it is flush with the bottom of the termination.
- Install Termination Body (Part 2: Core Removal and Overlap)
Slide the termination body onto the cable, aligning it with the forward edge of the mastic seal. Carefully remove the core by unwinding it counter-clockwise, starting with the loose end. Ensure the termination body, not the core, is butted against the leading edge of the mastic seal. Continue removing the core without pushing or pulling the assembly. If using a second housing, pull its core down within one coil of the bottom, slide it over the cable, and pull the core counterclockwise, overlapping the first termination by 1-1/2 inches (40mm).
- Finalize Termination and Ground Connection
Apply a thin film of silicone lubricant to the skirt and mastic seal area, avoiding skirt tabs. Carefully fold down the skirt over the mastic seal. Complete the lug area moisture seal using the remaining gray silicone rubber electrical tape, overlapping the termination insulator by approximately 1 inch and extending over a non-crimped region of the lug/connector barrel with a half-lap configuration. Connect the ground braid to the system ground. Confirm that the High-K step does not exceed 1.5 inches.
Frequently Asked Questions about ABB - Installation Products
How are Thomas and Betts products typically installed?
Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.
What accessories are available for Thomas and Betts products?
Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.
What environmental ratings do Thomas and Betts products have?
Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.
What communication protocols do Thomas and Betts products support?
Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.
What are the key features of Thomas and Betts products?
Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.
What are the main product lines offered by Thomas and Betts?
Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.
What technical support does Thomas and Betts offer?
Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.
What industries and applications are Thomas and Betts products used for?
Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.
What certifications and standards do Thomas and Betts products comply with?
Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.
What are the main product lines offered by Ocal?
Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.