Contact for Pricing
Overview
- Material: 316 stainless steel with Duraplated ground cone for corrosion resistance and grounding
- Size: 2-inch fitting for flexible metallic conduit
- Angle: 45-degree design for optimized conduit routing
- NEMA Ratings: 3, 3R, 4, 4X for protection against dust, rain, splashing water, and hose-directed liquids
- Temperature Range: 0 to 150°C for extreme thermal performance
- UV Resistance: High UV stability for outdoor installations
- Dimensions: 5.00" L x 3.05" W x 3.85" H (127.00 x 77.47 x 97.76 mm)
Specifications
Application | Connects Flexible Metallic Liquidtight Conduit to a Box or Enclosure |
Color | Metallic |
Declaration of Conformity - CE | 9AKK107492A9907 |
Finish | None |
Insulation | True |
Material | 316 Stainless Steel with Duraplated Ground Cone |
NEMA Rating | 3;3R;4;4X |
Size | 2 Inch |
Special Features | Stronger and More UV-resistant than Nonmetallic Fittings |
Temperature Rating, Maximum | 302 F |
Temperature Rating, Maximum | 150 C |
Temperature Rating, Minimum | 302 F |
Temperature Rating, Minimum | 150 C |
Type | 45 Degree Fitting for Flexible Metallic Conduit |
Package Dimensions (L x W x H) | 6 IN x 4.5 IN x 4 IN |
Package Dimensions (L x W x H) | 15.24 cm x 11.43 cm x 10.16 cm |
Package Weight (Imperial) | 2.7600 L |
Package Weight (Metric) | 1.2520 kg |
XQAS0505
Liquid Tight Fitting for Covered Conduit, Straight with External Male Thread, Conduit Size 25mm, 3/4 Inch NPT Thread, Very High Mechanical and UV Protection, IP66, IP67 Ratings, Stainless Steel AISI 316L, Nylon Seals
5352SST6
1/2 Inch Liquidtight Fitting for Flexible Metallic Conduit, 90 Degree, UL/CSA Listed, High UV Resistance, NEMA Ratings: 3, 3R, 4, 4X, Length 2.35 Inches/59.69mm, Width 1.33 Inches/33.78mm, Height 2.25 Inches/57.15mm, Temperature Range 0 to 105 Degrees C, 316 Stainless Steel with Duraplated Ground Cone5351SST6HT
3/8 Inch Liquidtight Fitting for Flexible Metallic Conduit, 90 Degree, High UV Resistance, NEMA Ratings: 3, 3R, 4, 4X, Length 2.14 Inches/54.36mm, Width 1.14 Inches/28.96mm, Height 1.87 Inches/47.50mm, Temperature Range 0 to 150 Degrees C, 316 Stainless Steel Body and Ground Cone5353SST6HT
3/4 Inch Liquidtight Fitting for Flexible Metallic Conduit, 90 Degree, High UV Resistance, NEMA Ratings: 3, 3R, 4, 4X, Length 2.60 Inches/66.04mm, Width 1.64 Inches/41.66mm, Height 2.58 Inches/65.53mm, Temperature Range 0 to 150 Degrees C, 316 Stainless Steel Body and Ground Cone5354SST6HT
1 Inch Liquidtight Fitting for Flexible Metallic Conduit, 90 Degree, High UV Resistance, NEMA Ratings: 3, 3R, 4, 4X, Length 3.32 Inches/84.33mm, Width 1.87 Inches/47.50mm, Height 2.95 Inches/74.93mm, Temperature Range 0 to 150 Degrees C, 316 Stainless Steel Body and Ground Cone5355SST6HT
1-1/4 Inch Liquidtight Fitting for Flexible Metallic Conduit, 90 Degree, High UV Resistance, NEMA Ratings: 3, 3R, 4, 4X, Length 4.06 Inches/103.12mm, Width 2.25 Inches/57.15mm, Height 3.48 Inches/88.39mm, Temperature Range 0 to 150 Degrees C, 316 Stainless Steel Body and Ground Cone
5357SST6HT
2 Inch Liquidtight Fitting for Flexible Metallic Conduit, 90 Degree, High UV Resistance, NEMA Ratings: 3, 3R, 4, 4X, Length 5.51 Inches/139.95mm, Width 3.05 Inches/77.47mm, Height 4.75 Inches/120.65mm, Temperature Range 0 to 150 Degrees C, 316 Stainless Steel Body and Ground Cone5353SST6-6HT
3/4 Inch Liquidtight Fitting for Flexible Metallic Conduit, 90 Degree, High UV Resistance, NEMA Ratings: 3, 3R, 4, 4X, Length 2.60 Inches/66.04mm, Width 1.64 Inches/41.66mm, Height 2.58 Inches/65.53mm, Temperature Range 0 to 150 Degrees C, 316 Stainless Steel with Duraplated Ground ConeFrequently Asked Questions
What is the size range for new 316 stainless steel fittings?
The new 316 stainless steel fittings are available in a size range from 3/8 in to 2 in.
What material is the liquidtight sealing gasket made of?
The liquidtight sealing gasket features a 316 stainless steel ring for corrosion protection and is filled with TPE for higher temperature and chemical resistance.
What material is the new liquidtight fitting made from?
The new liquidtight fitting is manufactured from 316 stainless steel, offering superior corrosion resistance.
What is the maximum temperature rating for high-temperature fittings?
High-temperature fittings are designed for extreme temperatures up to 150° C.
What are the available sizes and styles for high-temperature fittings?
High-temperature fittings are available in sizes from 3/8 in to 4 in for straight styles, and 3/8 in to 2 in for 45° and 90° styles. They are insulated only.
What is the size range for steel liquidtight fittings?
Steel liquidtight fittings are available in a size range from 1/4 in to 6 in.
What material is the new liquidtight fitting made from?
The new liquidtight fitting is manufactured from 316 stainless steel, offering superior corrosion resistance.
What is the maximum temperature rating for high-temperature fittings?
High-temperature fittings are designed for extreme temperatures up to 150° C.
What are the available sizes and styles for high-temperature fittings?
High-temperature fittings are available in sizes from 3/8 in to 4 in for straight styles, and 3/8 in to 2 in for 45° and 90° styles. They are insulated only.
What is the size range for steel liquidtight fittings?
Steel liquidtight fittings are available in a size range from 1/4 in to 6 in.
How to Install a 5347SST6HT Liquid-Tight Flexible Metallic Conduit Fitting
This guide provides step-by-step instructions for assembling and installing a 5347SST6HT stainless steel liquid-tight fitting for 2-inch flexible metallic conduit, ensuring a secure and liquid-tight connection to a box wall.
Estimated time: 15m
Tools needed:
Hacksaw (32 teeth/inch), Metal jig (optional), Power band saw (optional), Screwdriver, Hammer, Torque wrench (recommended for gland nut)
Supplies needed:
Liquid-tight flexible metallic conduit (2-inch), 5347SST6HT Stainless Steel Liquid-Tight Fitting, Seal Gasket (Part No. 5267), Locknut (Part No. LNSS/200), Box wall or threaded opening
- Prepare the Flexible Metallic Conduit
Cut the end of the flexible metallic conduit with a clean, square cut. For best results, use a metal jig and a sharp hacksaw with 32 teeth per inch. For high production, a power band saw with 24-32 teeth per inch, operating at no more than 400 feet per minute, can be used. DO NOT use an abrasive wheel for cutting.
- Assemble the Fitting Components onto the Conduit
First, slide the gland nut onto the prepared end of the flexible conduit. Next, slide the nylon sealing ring onto the conduit. Finally, thread the SAFE-EDGE® ground cone into the conduit, ensuring it is properly seated.
- Install the Fitting into the Box Wall or Opening
For knockout applications, insert the fitting body through the box wall or threaded opening. Place the Seal Gasket (Part No. 5267) against the exterior of the box wall, then secure the fitting from the inside of the box wall using the Locknut (Part No. LNSS/200). Ensure the fitting is oriented correctly (45-degree angle as per 5347SST6HT).
- Tighten the Gland Nut
Tighten the gland nut onto the fitting body. For the 2-inch NPT fitting (5347SST6HT), tighten the gland nut to the UL recommended value of 1600 lb-in (181 N-m) using a torque wrench to ensure a liquid-tight seal.
- Tighten the Locknut (if applicable)
If using a locknut for knockout applications, hand-tighten the locknut first. Then, further tighten the locknut an additional 1/4 turn using a hammer and a standard screwdriver, or an equivalent method, as per UL, CSA, and NEMA recommendations.
Frequently Asked Questions about ABB - Installation Products
How are Thomas and Betts products typically installed?
Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.
What accessories are available for Thomas and Betts products?
Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.
What environmental ratings do Thomas and Betts products have?
Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.
What communication protocols do Thomas and Betts products support?
Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.
What are the key features of Thomas and Betts products?
Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.
What are the main product lines offered by Thomas and Betts?
Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.
What technical support does Thomas and Betts offer?
Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.
What industries and applications are Thomas and Betts products used for?
Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.
What certifications and standards do Thomas and Betts products comply with?
Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.
What are the main product lines offered by Ocal?
Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.