
ABB Installation Products 15PCJ1F2220 15kV Power Cable Joint Style 1 with Single Piece Housing, Cable Insulation Diameter…
UPC: 783786631742
Contact for Pricing
Minimum Qty: 30
Multiplier: 30
*Contact for lower quantities*
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- Voltage rating: 15 kV for medium-voltage applications
- Cable insulation diameter range: 0.640 inch to 0.820 inch
- Compatible with #2 AWG stranded or #1 solid copper conductors
- Single-piece housing for simplified installation and reliability
- Suitable for XLPE, EPR, or PILC cable types in industrial and utility applications
Specifications
Application | For Direct Burial, Vault, Submersible and Other Severe Service Applications |
Color | Black |
Conductor Range | #2 STR AWG , #1 SOL AWG |
Connection | Compression |
Insulation | Yes |
Material | Copper Conductor |
Material | EPDM Rubber |
Number Of Conductors | 2 |
Size | 14-3/8 inch long |
Size | 0.640-0.820 inch (Insulation Diameter) |
Special Features | Power Cable Joints utilize permanently crimped connectors. PCJ housings are fully insulated, shielded and sealed for direct-burial, vault, submersible and other servere service applications. Units have been designed and tested per IEEE Standard 404 to ensure system matched performance and ratings equal to the cable to which the splice will be installed. Power Cable Joints are available in two styles. Style 1 uses a single-piece housing that is sized to accommodate a specific range of cable - ideally suited to straight splicing of the same or similar cable. Style 2 designs incorporate a universal housing with separate cable adapters to allow transition splices of different types and sizes of cable |
Standard | IEEE Standard 404 |
Type | Power Cable Joint |
Voltage Rating | 15 kV |
Package Dimensions (L x W x H) | 0.01 IN x 0.01 IN x 0.01 IN |
Package Dimensions (L x W x H) | 0.0254 cm x 0.0254 cm x 0.0254 cm |
Package Weight (Imperial) | 0.8000 L |
Package Weight (Metric) | 0.3630 kg |

15PCJ1F1220
15kV Power Cable Joint Style 1 with Single Piece Housing, Cable Insulation Diameter 0.640 inch to 0.820 inch. Aluminum Conductor. Conductor Size AWG Stranded #2/Solid #1.
15PCJ1F2210
15kV Power Cable Joint Style 1 with Single Piece Housing, Cable Insulation Diameter 0.640 inch to 0.820 inch. Copper Conductor. Conductor Size AWG Stranded #3/Solid #2.
15PCJ1F1250-1230
15kV Power Cable Joint Style 1 with Single Piece Housing, Cable Insulation Diameter 0.640 inch to 0.820 inch. Aluminum Conductor. Aluminum Conductor. Conductor Size AWG Stranded #1/Solid 1/0.
15PCJ1F1240
15kV Power Cable Joint Style 1 with Single Piece Housing, Cable Insulation Diameter 0.640 inch to 0.820 inch. Aluminum Conductor. Conductor Size AWG Stranded 1/0 /Solid 2/0.
15PCJ1F1210
15kV Power Cable Joint Style 1 with Single Piece Housing, Cable Insulation Diameter 0.640 inch to 0.820 inch. Aluminum Conductor. Conductor Size AWG Stranded #3/Solid #2.
15PCJ1F1230
15kV Power Cable Joint Style 1 with Single Piece Housing, Cable Insulation Diameter 0.640 inch to 0.820 inch. Aluminum Conductor. Conductor Size AWG Stranded #1/Solid 1/0.
15PCJ1F2200
15kV Power Cable Joint Style 1 with Single Piece Housing, Cable Insulation Diameter 0.640 inch to 0.820 inch. Copper Conductor. Conductor Size AWG Stranded #4/Solid #3.
15PCJ1F1220-1210
15kV Power Cable Joint Style 1 with Single Piece Housing, Cable Insulation Diameter 0.640 inch to 0.820 inch. Aluminum Conductor. Conductor Size AWG Stranded #2/Solid #1. luminum Conductor. Conductor Size AWG Stranded #3/Solid #2.Frequently Asked Questions
What voltage rating does this cable joint support?
The ABB 15PCJ1F2220 is rated for 15 kV medium-voltage applications.
What cable insulation diameters fit this joint?
The joint accommodates cable insulation diameters from 0.640 inch to 0.820 inch.
What conductor sizes are compatible with this joint?
This joint supports #2 AWG stranded or #1 solid copper conductors.
What type of housing does this joint use?
The joint features a single-piece housing for simplified installation and enhanced reliability.
Is this joint suitable for XLPE cables?
Yes, the ABB 15PCJ1F2220 is designed for XLPE, EPR, and PILC cable types.
How to Install a Single Core Cable Joint (15PCJ1F2220)
This guide provides detailed instructions for the safe and proper installation of a permanent, fully screened, submersible single core joint for extruded solid dielectric cables. It covers cable preparation, connector installation, and joint housing assembly.
Estimated time: 2h
Tools needed:
Wire strippers, Measuring tape or ruler, Wire brush, Crimping tool (for compression connectors), Soldering iron (or constant force spring tool), Sandpaper or sanding tool, Heat gun, Cleaning cloth
Supplies needed:
Joint Housing (15PCJ1F2220), Compression connector (copper or aluminum), PVC tape, Lubricant (supplied with joint), Cleaning solvent, Flat copper braid, Constant force spring (if not soldering), Mastic tape, Heat shrink tubing
- Perform Preparation and Safety Check
DANGER: De-energize all apparatus before installation or removal. Do not touch or move energized products. This product must be installed only by competent personnel trained in high voltage electrical equipment safety practices. Inspect all parts for damage, correct rating, and compatibility with mating parts. Gather all required tools and supplies, and maintain a clean work area throughout the procedure.
- Prepare Cables: Remove Jacket and Metallic Shield
Train both cables into their final position and square cut them, leaving approximately 5mm between the cable ends. Store the heat shrink tubing on either cable, away from the work area. Remove the outer jackets of both cables to the dimensions specified in Table 1F-1G (A, B, C). Carefully remove the cable metallic tape screen for the distance shown (B) and secure the ends with PVC tape. Ensure the PVC tape remains on the copper tape and does not overlap onto the non-metallic screen.
- Prepare Cables: Remove Non-Metallic Screen
WARNING: Do not nick, cut, or damage the insulation surface or conductor strands during this step. Carefully remove the cable non-metallic screen from both cables to the point specified (D) in Table 1F-1G. Bevel the edge of Cable 1's insulation. Cut the insulation to the conductor to dimension 'E' (Table 1F-1G) from the end of both cables, but do not remove the insulation at this stage. Install a PVC tape marker on Cable 2 to dimension 'B' (Table 1F-1G) to mark the splice location.
- Prepare Joint Housing for Temporary Storage
Apply one layer (half-lapped) of PVC tape over the metallic screen of Cable 1, starting at the jacket and extending 10mm beyond the end of the metallic screen. Install a different color PVC tape marker on Cable 1 to dimension 'B' (Table 1F-1G) to mark the splice location. Lubricate both cable entrances of the splice housing. Clean and lubricate the insulation, cable non-metallic screen, and the PVC-taped portion of the cable metallic tape screen on Cable 1. WARNING: Cover the forward edge and any other sharp edges of the metallic screen with PVC tape to prevent damage to the joint housing during storage. Store the joint housing onto Cable 1, sliding it up to the jacket. Do not store the splice housing on the exposed metallic tape shield.
- Remove Cable Insulation and Install Connector
Remove the cable insulation from both cables to dimension 'E' (Table 1F-1G). DO NOT CUT OR NICK THE CABLE INSULATION OR CONDUCTOR. Wire brush the exposed conductors of both cables. Immediately insert the conductors into the compression connector (conductor splice). Ensure both conductors are fully seated. Do not crimp yet. Check the distance between the insulations. If it exceeds the 'Check Dim (Before)' in Table 1F-1G, stop and review the instructions. Crimp the conductor splice according to the provided crimp chart. Remove any sharp protrusions or burrs from the crimped connector. Ensure all metal chips or filings are removed from the splice joint assembly area. Wipe off any excess inhibitor. Check the distance between cable insulations again. If it exceeds the 'Check Dim (After)' in Table 1F-1G, stop and review the instructions.
- Clean and Lubricate Core
WARNING: Remove all contaminants from the surface of the insulation. Clean the conductor, connector, and Cable 2 insulation surfaces with cleaning solvent and a clean cloth, always wiping towards the screen end. Lubricate the cable insulation surfaces using the supplied lubricant, always wiping toward the screen end to create a build-up or ramp of lubricant at the edge of the non-metallic screen.
- Install Joint Housing
Slide the joint housing over the crimp connector into its final position. Measure the distance 'X' between the joint housing and the PVC tape marker on each side; ensure that both 'X' distances are equal. Remove the PVC tape applied in Step 4 to expose 25mm of copper tape on each side.
- Restore Screen
Wrap flat copper braid around each joint housing, extending the ends over the metallic tape screen for 20mm on each side. Attach each end of the copper braid to the metallic tape screen by soldering or by using a constant force spring.
- Restore Outer Jacket
Lightly sand the outer surface of the jacket of both cables for a distance of 130mm from the joint housing. Heat both sanded areas for approximately 15 seconds. DO NOT BURN CABLES. Wrap two layers of mastic tape at the edge of the jacket on both cables. Position the heat shrink tubing (stored in Step 2) over the center of the assembly and shrink it, starting at the center and working towards the ends until fully sealed.
Frequently Asked Questions about ABB - Installation Products
How are Thomas and Betts products typically installed?
Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.
What accessories are available for Thomas and Betts products?
Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.
What environmental ratings do Thomas and Betts products have?
Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.
What communication protocols do Thomas and Betts products support?
Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.
What are the key features of Thomas and Betts products?
Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.
What are the main product lines offered by Thomas and Betts?
Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.
What technical support does Thomas and Betts offer?
Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.
What industries and applications are Thomas and Betts products used for?
Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.
What certifications and standards do Thomas and Betts products comply with?
Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.
What are the main product lines offered by Ocal?
Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.