Service Entrance Pedestal Assembly, Aluminum Bars mounted on Phenolic Base, Electrical Connector, less than 1000 volts, (1) 7-3/4 x 6 inch Board with (1) SEP Bus Bar with (Three 1/0-400 Holes), (1) SEP Bus Bar with (Six 1/2-4/0 Holes) includes Two Stainless Steel 3/8-11 x 1 inch Bolts, Two Stainless Steel Flat 3/8 inch Washers, Two Stainless Steel 3/8 inch Belleville Washers, Four Steel Slotted 1/4-20 x .5 inch Screws Assembled with Loctite (Red). Also includes Tin Plated (2) 3/4-16 x .875 Screws for 1/0-400 Bus Bar and (6) Tin Plated 5/8-16 x .813 inch Screws for 2-4/0 Bus Bar.

Aluminum Insulated Transformer Kit, #12 - 350 kcmil, Aluminum and Copper, Stud size 1 inch, Eight Conductor

3 Outlet Flood Seal Connector. Tin Plated Copper, Conductor Range Copper #2-1000 kcmil. Length 10 inch x 2-1/8 inch wide. Includes (3) Insulating Rockets, (6) 7/8-14 x 1-5/16 inch Screws. Black PVC Coating. Silicone Grease. Instruction Sheet.

Keebar Aluminum Insulated Transformer Connector, #12 - 350 kcmil, Aluminum and Copper, Stud 5/8 inch, Eight Conductor with Oxide Inhibitor

EZ Keeper, Aluminum Transformer Stud Connector, 6 Conductor, 1/0-750 kcmil, Aluminum and Copper, (1/0 to 350 kcmil use 240 in-lb or 20 ft-lb) 400 to 750 kcmil use 360 in-lb or 30 ft-lb). Length 14 inches x 2 inch tall x 2-5/8 inch wide. 1-1/4 inch Stud Size. Three Holes tapped at 5/8-18 UNF-2B (Break-Thru) for Stud.

Aluminum Quick Disconnect Transformer Connectors - ABW In-line bar, cable range 12-350, length 7-1/2 inch, boot no. SB 11, stud size 5/8, outlets 6, with Street Light Outlet Option, Oxide Inhibitor with Insulating Boots for Transformer Spade Connector, Black, - 8-1/8 inch long, 2 inch wide, 2-1/16 inch tall.

Multi-Port Transformer Connector - Bus 5 positions/towers with two 1/2 inch holes per tower, 1000 MCM, 11.750 inches x 12.531 inches. Welded 45 Degree Aluminum Pad with Six 0.625 inch Diameter Holes (Spacing 1.625 inch side to side and 1.750 inch front to back) on 5 inch x 3.312 inch x .750 inch Thick Pad. Coated with Black PVC. Includes 10 Screws for Towers. Left Hand Pad.

Tin Plated Copper Compression Connector. 2/0 to 4/0. Black PVC Coated. U-Shaped. 2-3/16 inch Center to Center. 1-19/64 inch Crimp Area.

Aluminum Lay-In Transformer Spade Connectors - ZBK Series, conductor range 1/0-1000, mount holes 8, outlets 8, with Oxide Inhibitor, length 7.001 inches

Multi Seal, Aluminum Insulated Bus Connector, #14 - 1/0, Aluminum and Copper, Three Conductor, Orange Plug instead of Black

Multi Seal, Aluminum Insulated Bus Connector, #12 Solid - 350 kcmil, Aluminum and Copper, Four Conductor. Outward Rocket.

Aluminum Flood-Seal 175 Series connectors - two-way configuration, length 18 in , outlets 12