15/25kV 600 Series Deadbreak Reducing Tap Well. Length 5.37 inch. Width 3 inch not counting bracket. 600/200 Amps

4 Point Junction, with one 200 Amp Bushing Well Interface, two 600 Amp Bushing interfaces and one 200 Amp Bushing Well Interface, 15kV, No Tilt Mounting.

900 Amp, 35kV, 600 Series Elbow with Test Point Housing only, with Stud.

15/25kV, 900 Amp, Deadbreak Bushing for In-Air Applications (Pad-Mounted or Vault-Type or Submersible Transformers or Switchgear). One Factory installed 5/8-11 UNC-2A Stud included, other Stud must be Purchased Separately. Overall Length 13.75 inch, Diameter 4.50 inch. Molded Epoxy with Stainless Steel Flange. Boot and Collar.

35kV 200 Amp, Loadbreak Insulated Cap with Ground Lead #14 AWG and Test Point, equipped with insulated cuff. Brass Probe. Diameter 3.13 inch, Length 8.56 inch.

Cable Support Brackets, Single Clamp, .80 inch-1.25 inch (20-32 mm), Stainless Steel.

35kv, 200 Amp Loadbreak Bushing Clamp and Gasket Kit - 3 Holes, for use on Bushing Well without Bail Tabs. Equipped with Copper Conductor Rod. Molded Epoxy Flange for Gasketed Clamp Mounting. Includes Epoxy Bushing Well, Clamp, Gasket and Instruction Sheet.

15/25kv, 200 Amp Bushing Clamp and Gasket Kit with 3-Holes. For use on Bushing Well without Bail Tabs only.

200 Amp, 15/25kV, Deadbreak Elbow, 2 Point Junction. Bails are required but not included, order separately. Center to Center spacing equals 4 inches.

Corrugated Contact Welded Adapter Assembly, Size M - Insulation Diameter Range 1.370 to 1.630 inch. includes Silicone Lubricant, (2) Hose Clamps, Molded Housing, Contact Assembly, Wooden Plug and Instruction Sheet.

15kV 600 Amp Series Loadbreak Elbow Tap Plug. Use 600ATM assembly tool.

Kellums bracket for tri-mounting fits overall cable O.D. from 1.195 inch to 1.625 inch