
Contact for Pricing
Overview
- Bidirectional stacked broadside antenna for 144-156 MHz
- 9 dBi gain and vertical polarization for strong signal performance
- Durable ABS/FG radome with PU foam filling and IP67 rating
- Copper radiator for efficient signal transmission
- N-female / TNC-female connectors for flexible integration
Specifications
Connector | N-/TNC-female |
Frequency | 144-156 MHz |
Gain | 9 dBi |
Length | 3065 mm |
Mounting Diameter | Ø 35-60 |
Polarization | vertical |
Radiator Material | copper |
Radome | FG, PU foam |
VSWR | <1.5 |
Weight | 4800 g |
Wind Load | 240 N @ 150 km/h |

CA85B4
bidirectional stacked broadside - Frequency range: 83-88 MHz - Gain: 9 dBi - Polarization: vertical - Connector: N-/TNC-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 336 NHow to Install the CA150B4 Controller
This guide provides step-by-step instructions for installing and configuring the CA150B4 Controller, ensuring proper wiring and initial setup.
Estimated time: 45m
Tools needed:
Screwdriver, Wire strippers, Multimeter
Supplies needed:
Mounting screws, Self-amalgamating tape, Terminal connectors
- Mount the controller
Secure the CA150B4 controller to the designated mounting surface using the provided mounting screws. Ensure the controller is level and firmly attached.
- Connect the wiring
Use terminal connectors to connect the power and signal wires to the appropriate terminals on the CA150B4 controller. Ensure all connections are tight and secure.
- Seal connections
Cover all connectors and cable junctions with self-amalgamating tape to provide weather protection. Ensure that the tape is applied evenly and securely.
- Verify connections
Use a multimeter to check the voltage at the power terminals of the CA150B4 controller to ensure proper power supply. Confirm that the voltage matches the specifications.
- Initial configuration
Follow the manufacturer's instructions to configure the CA150B4 controller settings according to your application requirements.

