
Contact for Pricing
Overview
- Bidirectional stacked broadside antenna for 163-177 MHz frequency range.
- 9 dBi gain with vertical polarization for strong signal performance.
- Durable UV-resistant ABS/FG radome with PU foam filling and copper radiator.
- IP67 rated construction for robust environmental protection.
- N-female / TNC-female connector and 35-60 mm pole mounting compatibility.
Specifications
Connector | N-/TNC-female |
Frequency | 163-177 MHz |
Gain | 9 dBi |
Length | 2710 mm |
Mounting Diameter | Ø 35-60 |
Polarization | vertical |
Radiator Material | copper |
Radome | FG, PU foam |
VSWR | <1.5 |
Weight | 4565 g |
Wind Load | 220 N @ 150 km/h |

CA85B4
bidirectional stacked broadside - Frequency range: 83-88 MHz - Gain: 9 dBi - Polarization: vertical - Connector: N-/TNC-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 336 NHow to Install the CA170B4 Controller
This guide provides step-by-step instructions for installing and configuring the CA170B4 Controller, ensuring proper wiring and setup.
Estimated time: 45m
Tools needed:
Screwdriver, Wire strippers, Multimeter
Supplies needed:
Mounting screws, Terminal connectors, Self-amalgamating tape
- Mount the controller
Secure the CA170B4 controller to the designated mounting surface using the provided mounting screws. Ensure the controller is level and firmly attached.
- Connect the wiring
Use wire strippers to prepare the ends of the wires. Connect the wires to the appropriate terminals on the CA170B4 controller, ensuring a secure fit.
- Seal the connections
Cover all connectors and cable junctions with self-amalgamating tape to protect against weather conditions. Ensure that the tape is applied tightly and evenly.
- Verify connections
Use a multimeter to check the continuity of the connections. Ensure that all connections are secure and functioning properly.

