
CompleTech CA85B4 bidirectional stacked broadside - Frequency range: 83-88 MHz - Gain: 9 dBi…
Documents & Media
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- Bidirectional stacked broadside antenna for 83-88 MHz
- 9 dBi gain with vertical polarization
- Durable UV-resistant ABS/FG radome with PU foam filling
- IP67 rated for dust and water ingress protection
- N-female / TNC-female connector and 35-60 mm pole mount
Specifications
Connector | N-/TNC-female |
Frequency | 83-88 MHz |
Gain | 9 dBi |
Length | 5315 mm |
Mounting Diameter | Ø 35-60 |
Polarization | vertical |
Radiator Material | copper |
Radome | FG, PU foam |
VSWR | <1.5 |
Weight | 6460 g |
Wind Load | 336 N @ 150 km/h |

CA420B4
bidirectional stacked broadside - Frequency range: 405-440 MHz - Gain: 9 dBi - Polarization: vertical - Connector: N-/TNC-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 132 N
CA150C2
offset pattern collinear - Frequency range: 144-156 MHz - Gain: 8 dBi - Polarization: vertical - Connector: N-/TNC-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 120 N
CA85C3
offset pattern collinear - Frequency range: 83-88 MHz - Gain: 10 dBi - Polarization: vertical - Connector: N-/TNC-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 189 N
CA160C4
offset pattern collinear - Frequency range: 154-166 MHz - Gain: 11 dBi - Polarization: vertical - Connector: N-/TNC-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 228 N
CA930C3
offset pattern collinear - Frequency range: 880-960 MHz - Gain: 10 dBi - Polarization: vertical - Connector: N-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 75 N
CA450D
offset pattern dipole - Frequency range: 440-475 MHz - Gain: 5 dBi - Polarization: vertical/horizontal - Connector: N-/ TNC-/ 7/16-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 32 NFrequently Asked Questions
What is the operating temperature range for this antenna?
The antenna can operate in temperatures ranging from -40ºC to +80ºC.
What is the impedance of the ComAnt CA85B4 antenna?
The impedance of the antenna is 50 ohm.
What is the gain of the ComAnt CA85B4 antenna?
The antenna has a gain of 9 dBi.
What types of connectors are available for this antenna?
The antenna is available with N-female or TNC-female connectors.
What is the VSWR rating for the ComAnt CA85B4 antenna?
The VSWR for the antenna is less than 1.5.
What is the IP rating of the ComAnt CA85B4 antenna?
The antenna has an IP67 rating, indicating it is dust-tight and protected against water immersion.
How is lightning protection implemented on this antenna?
The antenna features DC-short circuited lightning protection.
What materials are used for the radome and radiator?
The radome is made of UV resistant ABS/FG with PU foam filling, and the radiator is made of copper.
What is the beamwidth in the E-plane for this antenna?
The E-plane beamwidth (E -3 dB) is 27 degrees.
What is the beamwidth in the H-plane for this antenna?
The H-plane beamwidth (H -3 dB) is 71 degrees.
How to Install the CA85B4 Controller
This guide provides step-by-step instructions for installing and configuring the CA85B4 Controller, ensuring proper wiring and calibration.
Estimated time: 45m
Tools needed:
Screwdriver, Wire strippers, Multimeter
Supplies needed:
Mounting screws, Self-amalgamating tape, Terminal connectors
- Mount the controller
Secure the CA85B4 controller to the designated mounting location using the provided mounting screws. Ensure it is level and firmly attached.
- Connect the wiring
Use wire strippers to prepare the ends of the wires. Connect the wires to the appropriate terminals on the CA85B4 controller, ensuring a secure fit.
- Seal the connections
Cover all connectors and cable junctions with self-amalgamating tape to provide weather protection and prevent moisture ingress.
- Verify connections
Use a multimeter to check the continuity of the connections. Ensure there are no short circuits or open circuits before powering on the controller.
- Power on the controller
Once all connections are verified, power on the CA85B4 controller and observe the initial startup sequence.
- Calibrate the controller
Follow the manufacturer's instructions to calibrate the CA85B4 controller for optimal performance.

