
CompleTech CA860C2 offset pattern collinear - Frequency range: 830-890 MHz - Gain: 8 dBi - Polarization…
Documents & Media
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- Frequency Range: 830-890 MHz
- Gain: 8 dBi
- Polarization: Vertical
- Connector: N-female
- Radome: UV resistant ABS/FG with PU foam filling, IP67 rated
Specifications
Connection Type | N-female |
Connector | N-female |
Frequency | 830-890 MHz |
Gain | 8 dBi |
Length | 530 mm |
Material | copper, ABS/FG PU foam |
Mounting Diameter | Ø 35-60 |
Mounting Type | 35-60 mm diameter pole |
Polarization | vertical |
Radiator Material | copper |
Radome | ABS/FG, PU foam |
Series | CA860C2 |
VSWR | <1.5 |
Weight | 1480 g |
Wind Load | 50 N @ 150 km/h |

CA85C2
offset pattern collinear - Frequency range: 83-88 MHz - Gain: 8 dBi - Polarization: vertical - Connector: N-/TNC-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 168 N
CA380N4
cardioid pattern notch - Frequency range: 365-395 MHz - Gain: 8 dBi - Polarization: vertical - Connector: N-/TNC-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 140 N
CA400C3
offset pattern collinear - Frequency range: 380-410 MHz - Gain: 10 dBi - Polarization: vertical - Connector: N-/TNC-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 102 N
CA140D
offset pattern dipole - Frequency range: 135-145 MHz - Gain: 5 dBi - Polarization: vertical/horizontal - Connector: N-/ TNC-/ 7/16-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 63 N
CA140S3
directional stacked yagi array - Frequency range: 135-145 MHz - Gain: 10 dBi - Polarization: vertical/horizontal - Connector: N-/TNC-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 252 N
CA400B4
bidirectional stacked broadside - Frequency range: 380-410 MHz - Gain: 9 dBi - Polarization: vertical - Connector: N-/TNC-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 136 NFrequently Asked Questions
What is the operating temperature range for the CA860C2 antenna?
The CA860C2 antenna can operate in temperatures ranging from -40ºC to +80ºC.
What is the impedance of the CA860C2 antenna?
The impedance of the CA860C2 antenna is 50 ohm.
What is the gain of the CA860C2 antenna?
The CA860C2 antenna has a gain of 8 dBi.
What is the VSWR rating for the CA860C2 antenna?
The VSWR for the CA860C2 antenna is less than 1.5.
What type of connector does the CA860C2 antenna use?
The CA860C2 antenna uses N-female or TNC-female connectors.
What is the IP rating of the CA860C2 antenna?
The CA860C2 antenna has an IP rating of 67.
How is the CA860C2 antenna protected against lightning?
The CA860C2 antenna is DC-short circuited for lightning protection.
What materials are used for the CA860C2 antenna's radome and radiator?
The radome is made of UV resistant ABS/FG with PU foam filling, and the radiator is made of copper.
What is the beamwidth (E -3 dB) of the CA860C2 antenna?
The E -3 dB beamwidth of the CA860C2 antenna is 27 degrees.
What is the beamwidth (H -3 dB) of the CA860C2 antenna?
The H -3 dB beamwidth of the CA860C2 antenna is 181 degrees.
How to Install the CA860C2 Controller
This guide provides step-by-step instructions for installing and configuring the CA860C2 Controller, ensuring proper wiring and initial setup.
Estimated time: 45m
Tools needed:
Screwdriver, Wire strippers, Multimeter
Supplies needed:
Mounting screws, Self-amalgamating tape, Terminal connectors
- Mount the controller
Secure the CA860C2 controller to the designated mounting surface using the provided mounting screws. Ensure it is level and firmly attached.
- Connect the wiring
Use terminal connectors to connect the power and signal wires to the appropriate terminals on the CA860C2. Ensure all connections are tight and secure.
- Seal connections
Cover all connectors and cable junctions with self-amalgamating tape to provide weather protection. Ensure that the tape is applied evenly and securely.
- Verify connections
Use a multimeter to check the voltage at the power terminals to ensure proper power supply. Confirm that all connections are functioning correctly.
- Configure the controller
Follow the manufacturer's instructions to program the CA860C2 controller settings as required for your application.

