CompleTech CA930C2 - offset pattern collinear - Frequency range: 880-960 MHz - Gain: 8 dBi - Polarization: vertical - Connector: N-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 50 N
CompleTech

CA930C2


Documents & Media
Installation InstructionsSpecification Sheet

Contact for Pricing

Overview

The CompleTech CA930C2 is an offset pattern collinear antenna designed for reliable operation within the 880-960 MHz frequency range. This antenna delivers a gain of 8 dBi and features vertical polarization, ensuring effective signal transmission and reception for critical wireless infrastructure. Its construction incorporates a UV-resistant ABS/FG radome with PU foam filling, providing robust protection against environmental factors. The radiator is made from high-conductivity copper, ensuring signal integrity. Designed for durability, the CA930C2 meets IP67 ingress protection standards and operates reliably across a wide temperature range of -40ºC to +80ºC. The antenna features a low VSWR of less than 1.5, minimizing signal reflection and maximizing power transfer. Connectivity is established via a standard N-female connector. Mounting is facilitated by an aluminum alloy bracket compatible with poles ranging from 35-60 mm in diameter, secured with stainless steel V-bolts and self-locking nuts. The lightning protection is achieved through a DC-short circuited feed point. Key features include an integrated impedance compensation and an integrated RF choke. The CA930C2 is an ideal choice for telecommunications, industrial wireless, and public safety applications requiring dependable performance in challenging conditions. Manufacturer: CompleTech. SKU: CA930C2.
  • Frequency Range: 880-960 MHz
  • Gain: 8 dBi
  • Polarization: Vertical
  • Connector: N-female
  • VSWR: <1.5
  • Radome: UV resistant ABS/FG with PU foam filling
  • Radiator Material: Copper
  • Mounting: Ø 35-60 mm pole
  • IP Rating: 67
  • Operating Temperature: -40ºC to +80ºC

Specifications

Connector
N-female
Frequency
880-960 MHz
Gain
8 dBi
Length
492 mm
Mounting Diameter
Ø 35-60
Polarization
vertical
Radiator Material
copper
Radome
ABS/FG, PU foam
VSWR
<1.5
Weight
1455 g
Wind Load
50 N @ 150 km/h
offset pattern collinear - Frequency range: 830-890 MHz - Gain: 8 dBi - Polarization: vertical - Connector: N-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 50 N

CA860C2

offset pattern collinear - Frequency range: 830-890 MHz - Gain: 8 dBi - Polarization: vertical - Connector: N-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 50 N
Antenna Combi 2x2 MIMO LTE/UMTS - GNSS. - EN50155 - IP67 - black

ANT-A-N3-CG-TRP-b

Antenna Combi 2x2 MIMO LTE/UMTS - GNSS. - EN50155 - IP67 - black
Wi-Fi antenna, screw mounted with 3m cable - RP-SMA

601-0005

Wi-Fi antenna, screw mounted with 3m cable - RP-SMA

How to Install the CA930C2 Controller

This guide provides step-by-step instructions for installing and configuring the CA930C2 Controller, ensuring proper wiring and initial setup.

Estimated time: 45m

Tools needed:

Screwdriver, Wire strippers, Multimeter

Supplies needed:

Mounting screws, Terminal connectors, Self-amalgamating tape

  1. Mount the controller

    Secure the CA930C2 controller to the designated mounting surface using the provided mounting screws. Ensure the controller is level and firmly attached.

  2. Connect the wiring

    Use wire strippers to prepare the ends of the wires. Connect the power and signal wires to the appropriate terminals on the CA930C2 controller, ensuring a secure fit.

  3. Seal the connections

    Cover all connectors and cable junctions with self-amalgamating tape to provide weather protection and prevent moisture ingress.

  4. Verify the installation

    Use a multimeter to check the voltage at the controller terminals to ensure proper power supply. Confirm that all connections are secure.