Authorized ABB Distributor (Installation Products)
ABB - Installation Products USK 350-4 - Aluminum Flood-Seal Mechanical Splice Two-Wire Kits, conductor range 6-350 connector length 4 inch, screws per side 1

ABB Installation Products USK 350-4 Aluminum Flood-Seal Mechanical Splice Two-Wire Kits, conductor range 6-350 connector…

UPC: 783786755622


Documents & Media
Installation InstructionsManufacturer Product Website

Contact for Pricing

Minimum Qty: 25

Multiplier: 25

*Contact for lower quantities*

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

ABB Installation Products USK 350-4 is a flood-seal mechanical splice kit designed for aluminum conductors ranging from 6 AWG to 350 AWG. The 4-inch connector length ensures secure mechanical and electrical connections in overhead, underground, and industrial applications. Each kit includes one screw per side for reliable termination and long-term performance. This flood-seal design provides environmental protection against moisture, corrosion, and contaminants, making it suitable for outdoor and harsh environments. The mechanical splice mechanism eliminates the need for soldering or crimping, reducing installation time and labor costs. The aluminum construction ensures compatibility with aluminum conductors while maintaining high conductivity and durability. Ideal for utility, renewable energy, and industrial installations where reliable splicing of large aluminum conductors is required. The USK 350-4 meets industry standards for mechanical splices and is manufactured by ABB, a trusted name in electrical installation products. Each kit is designed for quick, tool-assisted installation with minimal training required.
  • Flood-seal design for environmental protection against moisture and contaminants
  • Mechanical splice mechanism for quick, tool-assisted installation
  • Compatible with aluminum conductors from 6 AWG to 350 AWG
  • 4-inch connector length with 1 screw per side for secure termination
  • Manufactured by ABB Installation Products for utility and industrial use

Specifications

Application
Repair Splice
Conductor Range
#6 to 350 kcmil
Connection
Mechanical
Insulation
True
Material
Aluminum Connector, EPDM Cover
Number of Conductors
2
Size
4 inch connector
Special Features
Prefilled with Oxide Inhibitor to prevent Oxidation and keep out Moisture. Dual-Rated and approved for use with Aluminum and Copper Conductors. EPDM Rubber Splice Covers ensure a fully insulated, watertight repair splice. No Taping, Heat-Shrink or Mastic needed
Type
Mechanical Splice
Package Dimensions (L x W x H)
0.01 IN x 0.01 IN x 0.01 IN
Package Dimensions (L x W x H)
0.0254 cm x 0.0254 cm x 0.0254 cm
Package Weight (Imperial)
0.6300 L
Package Weight (Metric)
0.2860 kg
Aluminum Flood-Seal Mechanical Splice Two-Wire Kits, conductor range 6-350 connector length 12 inch, screws per side 2

USK 350-12 DS

Aluminum Flood-Seal Mechanical Splice Two-Wire Kits, conductor range 6-350 connector length 12 inch, screws per side 2
Single cable clamp 150-300mm2 for power terminal type 5

45000034

Single cable clamp 150-300mm2 for power terminal type 5
Flood-Seal Street and Highway Lighting Mechanical Fuse and Disconnect Kits-In-Line, fused, conductor range stranded 12,10,8,6,4 and solid 12,10,8,6,4

SLK-M

Flood-Seal Street and Highway Lighting Mechanical Fuse and Disconnect Kits-In-Line, fused, conductor range stranded 12,10,8,6,4 and solid 12,10,8,6,4
Flood-Seal Street and Highway Lighting Mechanical Fuse and Disconnect Kits, In-Line Variable-Range, fused, conductor range stranded 1/0-2 and solid 1/0-2

SLK 1010-60 M

Flood-Seal Street and Highway Lighting Mechanical Fuse and Disconnect Kits, In-Line Variable-Range, fused, conductor range stranded 1/0-2 and solid 1/0-2
Copper Flood-Seal Street and Highway Lighting Compression Fuse Kits - In-Line, Single Housing, wire size stranded 4 and solid 2

SLK 2

Copper Flood-Seal Street and Highway Lighting Compression Fuse Kits - In-Line, Single Housing, wire size stranded 4 and solid 2
Aluminum Flood-Seal Mechanical Splice Two-Wire Kits, conductor range 250-750 connector length 16-1/16 inch, screws per side 2

USK 750

Aluminum Flood-Seal Mechanical Splice Two-Wire Kits, conductor range 250-750 connector length 16-1/16 inch, screws per side 2
Copper Flood-Seal Street and Highway Lighting Compression Non-Fused Kits - In-Line, Twin Housing, wire size stranded 8-6 and solid 6-4

SDT 6

Copper Flood-Seal Street and Highway Lighting Compression Non-Fused Kits - In-Line, Twin Housing, wire size stranded 8-6 and solid 6-4
Copper Flood-Seal Street and Highway Lighting Compression Non -Fused Kits - In-Line, Single Housing, No. 6 side wire size stranded 14-10 and solid 14-8, No. 2 side wire size stranded #4 and solid #2

SDK 6-2

Copper Flood-Seal Street and Highway Lighting Compression Non -Fused Kits - In-Line, Single Housing, No. 6 side wire size stranded 14-10 and solid 14-8, No. 2 side wire size stranded #4 and solid #2

How to Install the Flood-Seal Mechanical Splice Kit USK 350-4

This guide provides step-by-step instructions for installing the "Flood-Seal" Mechanical Splice Kit USK 350-4, designed for direct-buried cable splices. Installation must be performed by trained installers in accordance with all applicable local, state, and national electrical codes, installation standards, and safety rules to prevent electric shock.

Estimated time: 30m

Tools needed:

Torque wrench, Wire strippers

Supplies needed:

Correct cut-off ring, Silicone grease, Mechanical connector, Rocket sleeve, EPDM covers

  1. Select Correct Cut-Off Ring

    Select the appropriate cut-off ring for the specific cable size being used in the splice.

  2. Prepare First Cable End

    Wipe the first cable clean. Bevel the end of the cable insulation to facilitate easier installation of components.

  3. Strip First Cable Insulation

    Strip approximately 1-1/2 inches of insulation from the first cable end to prepare it for the mechanical connector.

  4. Install Rocket Sleeve on First Cable

    Apply silicone grease to the end of the first cable and the cut opening of the rocket sleeve. Carefully slide the rocket sleeve over the cable.

  5. Trim Rocket Sleeve on First Cable

    Cut off the rocket sleeve at the tip of the arrow, ensuring that the correct cable size is clearly visible on the opened rocket.

  6. Install Mechanical Connector

    Install the mechanical connector onto the stripped cable ends. Apply the suggested torque: 120 in-lbs (10 ft-lbs) for #6 to #4 wire sizes, and 240 in-lbs (20 ft-lbs) for 2 to 350 Kcmil wire sizes.

  7. Prepare Second Cable End

    Repeat steps 2, 3, and 4 for the second cable end to prepare it for the splice.

  8. Assemble and Seal Covers

    Apply silicone grease to the open edge of the rocket. Center the mechanical connector precisely between the EPDM covers. Slide the covers together firmly to create a secure and sealed splice.

Frequently Asked Questions about ABB - Installation Products

How are Thomas and Betts products typically installed?

Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.

What accessories are available for Thomas and Betts products?

Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.

What environmental ratings do Thomas and Betts products have?

Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.

What communication protocols do Thomas and Betts products support?

Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.

What are the key features of Thomas and Betts products?

Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.

What are the main product lines offered by Thomas and Betts?

Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.

What technical support does Thomas and Betts offer?

Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.

What industries and applications are Thomas and Betts products used for?

Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.

What certifications and standards do Thomas and Betts products comply with?

Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.

What are the main product lines offered by Ocal?

Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.