Authorized ABB Distributor (Installation Products)
ABB - Installation Products SSP 2 FN 500K - Storm-Safe Pin Kits, triplex block - 2,2,2, neutral assembly - full neutral, breakaway force - 500 Pound Break Force

ABB Installation Products SSP 2 FN 500K Storm-Safe Pin Kits, triplex block - 2,2,2, neutral assembly - full neutral, breakaway…

UPC: 783786753352


Documents & Media
BrochureInstallation InstructionsManufacturer Product Website

Contact for Pricing

Minimum Qty: 60

Multiplier: 60

*Contact for lower quantities*

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

The ABB Storm-Safe Pin Kits, SKU SSP 2 FN 500K, are designed for secure and reliable connections in demanding environments. This triplex block assembly features a full neutral configuration, ensuring comprehensive electrical distribution. Engineered with a robust breakaway force of 500 pounds, these pin kits provide enhanced safety and stability, crucial for applications exposed to harsh weather conditions or potential physical stress. The "Storm-Safe" designation highlights their suitability for outdoor installations where resilience against environmental factors is paramount. Manufactured by ABB Installation Products, a trusted name in electrical components, the SSP 2 FN 500K offers dependable performance for critical infrastructure and utility applications. Its design prioritizes both safety and operational integrity, making it an essential component for maintaining uninterrupted power flow. The triplex block configuration with a full neutral assembly simplifies wiring and ensures proper grounding, contributing to the overall safety and efficiency of the electrical system. When selecting components for exposed or high-stress electrical setups, the 500-pound breakaway force of the ABB Storm-Safe Pin Kits offers a quantifiable measure of their strength and reliability.
  • Triplex block assembly with full neutral
  • 500 Pound Breakaway Force for enhanced safety
  • Storm-Safe design for outdoor and harsh environments
  • Manufactured by ABB Installation Products
  • SKU: SSP 2 FN 500K

Specifications

Application
Mechanical breakaway link separates service at the pole to prevent damage to utility equi[ment and customer premises
Insulation
Yes
Series
SSP
Size
2
Special Features
Crew Safety - The correction is made well below the high-voltage bushings, making it safer for crews to work during a storm outage. Downed-Line Safety - separates at the pole not the weatherhead. The line always comes down de-energized. Quick restoration of power. Simply replace the mechanical breakaway link and reinsert the contacts
Type
Storm-Safe Pin Kits
Wire Size
#2 AWG
Package Dimensions (L x W x H)
0.01 IN x 0.01 IN x 0.01 IN
Package Dimensions (L x W x H)
0.0254 cm x 0.0254 cm x 0.0254 cm
Package Weight (Imperial)
0.8700 L
Package Weight (Metric)
0.3950 kg
Storm-Safe Breakaway Service Entrance Kits, triplex block - 2,2,2, neutral assembly - full neutral, breakaway force - 500 Pound Break Force

SS1 2 FN 500K

Storm-Safe Breakaway Service Entrance Kits, triplex block - 2,2,2, neutral assembly - full neutral, breakaway force - 500 Pound Break Force
Storm-Safe Breakaway Service Entrance Kits- three service base kit, contact block - 1, assembly - 1 U-bolt, insulating rockets - 2 Flood-Seal, bolts - 3, bolt size - 1/2-13

SS3 K

Storm-Safe Breakaway Service Entrance Kits- three service base kit, contact block - 1, assembly - 1 U-bolt, insulating rockets - 2 Flood-Seal, bolts - 3, bolt size - 1/2-13
Storm-Safe Pin Kits, triplex block - 1/0,1/0,1/0 ACSR, neutral assembly - full neutral, breakaway force - 500 Pound Break Force

SSP 1/0 FN 500K

Storm-Safe Pin Kits, triplex block - 1/0,1/0,1/0 ACSR, neutral assembly - full neutral, breakaway force - 500 Pound Break Force
Storm-Safe Pin Kits, triplex block - 4,4,6, neutral assembly - reduced neutral, breakaway force - 750 Pound Break Force

SSP 4 RN 750K

Storm-Safe Pin Kits, triplex block - 4,4,6, neutral assembly - reduced neutral, breakaway force - 750 Pound Break Force
Storm-Safe Pin Kits, triplex block - 4,4,4, neutral assembly - full neutral, breakaway force - 750 Pound Break Force

SSP 4 FN 750K

Storm-Safe Pin Kits, triplex block - 4,4,4, neutral assembly - full neutral, breakaway force - 750 Pound Break Force
Storm-Safe Pin Kits, triplex block - 2,2,2, neutral assembly - full neutral, breakaway force - 750 Pound Break Force

SSP 2 FN 750K

Storm-Safe Pin Kits, triplex block - 2,2,2, neutral assembly - full neutral, breakaway force - 750 Pound Break Force
Storm-Safe Pin Kits, triplex block - 4,4,4, neutral assembly - full neutral, breakaway force - 500 Pound Break Force

SSP 4 FN 500K

Storm-Safe Pin Kits, triplex block - 4,4,4, neutral assembly - full neutral, breakaway force - 500 Pound Break Force
Polycarbonate Insulated Female Disconnect Terminal, Wire Range 0.5-1.5 millimeters squared, Tab Size 4.8mm x 0.5mm

RA48V

Polycarbonate Insulated Female Disconnect Terminal, Wire Range 0.5-1.5 millimeters squared, Tab Size 4.8mm x 0.5mm

Frequently Asked Questions

What is the breakaway force of the SSP 2 FN 500K pin kit?

The SSP 2 FN 500K pin kit has a breakaway force of 500 pounds.

What type of assembly does the ABB Storm-Safe Pin Kit feature?

The ABB Storm-Safe Pin Kit features a triplex block assembly with a full neutral.

How to Install the SSP Series Service Entrance Disconnect System

This guide provides detailed instructions for the safe installation and wiring of the SSP Series Multiple Service Kit, covering power disconnection, component mounting, cable preparation, and connection procedures for service entrance disconnect systems.

Estimated time: 2h

Tools needed:

Approved safety cutting device, Crimping tool, Listed dies (e.g., 5/8 die), Torque wrench (480 in-lb capacity), Insulated gloves (rated to appropriate voltage)

Supplies needed:

CS 2011 Flood-Seal® Insulating rockets, CS 2277 Flood-Seal® insulating rockets, Silicone grease, Appropriately sized compression lugs, Pin Connectors, U-Bolt, Nuts, Neutral wedge clamp, Breakaway link, Replacement service cables (if needed)

  1. Disconnect Power and Secure Service Drop

    WARNING: Danger of Electric Shock! Installation must be performed by trained installers following all applicable electrical codes and safety rules. Disconnect power cables from the transformer or feed and secure the service drop. Wear insulated gloves rated to the appropriate voltage when working on live conductors. Ensure the contact block is not under load if energized.

  2. Install Breakaway Link

    Open the neutral wedge clamp. Install the breakaway link between the wedge clamp and the pole hardware. Tighten the service drop as required.

  3. Mount Contact Block

    Install the contact block to the eyebolt using the included U-Bolt. Tighten the nuts from the pole side of the contact block.

  4. Prepare Service Cables

    Cut the service cables from the transformer or feed. If the cables are not large enough for multiple loads, replace them with the proper size. Ensure the feed cables have some slack when held alongside the pads to allow the contact block to swing.

  5. Prepare Hot Legs with Rockets and Lugs

    Cut two CS 2011 Flood-Seal® Insulating rockets at the appropriate ring using an approved safety cutting device. Install these rockets on the two hot legs. Apply silicone grease to the cables to ease installation. Crimp appropriately sized compression lugs onto the three cables using an appropriate crimping tool and listed dies.

  6. Terminate Neutral and Hot Legs (Feed-side)

    First, terminate the neutral lug onto the center pad of the contact block, ensuring the barrel is over the pad. Torque the connection to 480 in-lb. Next, install one of the hot (energized) legs as per the neutral leg. Slide a Flood-Seal® insulating rocket over this connection. Repeat for the other hot leg. Note: A rocket is not required for the Neutral leg.

  7. Position Load-Side Triplex Service Cable

    Position the load-side triplex service cable alongside the Storm-Safe® contact block. Ensure the neutral conductor is 6 to 12 inches longer than the phase conductors to ensure it pulls out last in a storm event.

  8. Prepare Load-Side Hot Conductors with Rockets

    Cut two CS 2277 Flood-Seal® insulating rockets at the appropriate ring using an approved safety cutting device. Install these rockets on the two load-side hot conductors.

  9. Prepare Load-Side Pin Connectors

    Position the Load-side cables alongside the pin connectors and mark at 1/8” beyond the knurl mark. Mark and strip the cable. Determine the neutral socket in a reduced neutral setup. Crimp the Pin Connectors onto the conductors using a 5/8 or equivalent die as shown on the crimp body. Fill the crimp body between the knurl marks with crimps spaced 1/8” apart (five crimps with a 5/8 die).

  10. Insert Neutral Pin (Load-side)

    Insert the Neutral Pin into the contact block. The neutral is the center row and is identified with a white marker. The neutral body is oversized and cannot be inserted into a hot leg tower.

  11. Insert Hot Leg Pins (Load-side)

    Insert one of the hot leg pins into one of the outer contact block towers. Slide the Flood-Seal® insulating rockets over the towers. Do not use silicone grease for these rockets. Repeat this process for the other services. Note: A rocket is not required for the Neutral leg.

  12. Reconnect Transformer or Feed

    Reconnect the transformer or feed to restore power to the system.

Frequently Asked Questions about ABB - Installation Products

How are Thomas and Betts products typically installed?

Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.

What accessories are available for Thomas and Betts products?

Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.

What environmental ratings do Thomas and Betts products have?

Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.

What communication protocols do Thomas and Betts products support?

Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.

What are the key features of Thomas and Betts products?

Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.

What are the main product lines offered by Thomas and Betts?

Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.

What technical support does Thomas and Betts offer?

Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.

What industries and applications are Thomas and Betts products used for?

Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.

What certifications and standards do Thomas and Betts products comply with?

Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.

What are the main product lines offered by Ocal?

Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.