ABB Installation Products R2T28M2-N0250 Ranger2 Termination. Type - Outdoor, 28kV, Cable Type - Tape Shield/Wire Shield/…
UPC: 075114172400
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- Outdoor-rated 28kV termination for medium-voltage applications.
- Accommodates cable insulation diameters from 0.84 to 1.38 inches.
- Compatible with tape shield, wire shield, and unshielded cable types.
- Aluminum 2-hole spade connector for #2-1250 kcmil conductors.
- Supports stranded/compressed 2/0 AWG or solid 3/0 AWG conductors.
Specifications
Application | Cable Termination, Outdoor Application, 28kV |
Cable Type | Copper Tape Shielded Wire |
Color | Gray |
Conductor Size | 2/0 STR AWG , 2/0 COMPR AWG , 3/0 SOL AWG , 3/0 COMPT AWG |
Earthing | Products Includes Their Own Grounding System |
Mounting | Product Need to have Cable Holder (not included) |
Number Of Terminals | (1) Single Phase |
Special Features | Silicone Rubber Housing. Lightweight, Compact Design. Pull-Down Tabs for Easy Installation. Thick Wall Construction |
Standard | IEEE 48 |
Type | Cable Termination - Outdoor - Ranger2 |
Voltage Rating | 28 kV |
Package Dimensions (L x W x H) | 0.01 IN x 0.01 IN x 0.01 IN |
Package Dimensions (L x W x H) | 0.0254 cm x 0.0254 cm x 0.0254 cm |
Package Weight (Imperial) | 1.0000 L |
Package Weight (Metric) | 0.4540 kg |
R2T28J4-N0250
Ranger2 Termination. Type - Outdoor, 28kV, Cable Type - Concentric Neutral/Jacketed Concentric Neutral, Insulation Range - 1.30 inch - 2.10 inch, Connector Type - Aluminum 2-Hole Spade #2-1250 kcmil, Conductor Code - 250 -Stranded or Compressed 2/0 Compact or Solid 3/0.R2T28J2T0240B2
Ranger2 Termination for 25/28KV outdoor application, cable insulation diameter .84 - 1.38 inches for Concentric Neural and Jacketed Concentric Neutral Cable, includes Universal Aluminum Barrel For Aluminum or Copper Conductor with copper wire lead #2-4/0, Stranded or Compressed 1/0 /Compact or Solid 2/0, Stainless Steel Mounting Bracket 1.10 inch - 1.50 inchR2T28M2-N0260
Ranger2 Termination for 25/28KV outdoor application, cable insulation diameter .84 - 1.38 inches for Tape Shield, Wire Shield, and Unshielded Cable, includes Aluminum 2-Hole Spade connector for #2-1250 kcmil, Stranded or Compressed 3/0 /Compact or Solid 4/0R2T28J2-N2240
Ranger2 Termination for 25/28KV outdoor application, cable insulation diameter .84 - 1.38 inches for Concentric Neural and Jacketed Concentric Neutral Cable, Includes Copper 2-Hole Spade connector for #2-1250 kcmil, Stranded or Compressed 1/0 /Compact or Solid 2/0R2T28J2-T0240-B3
Ranger2 Termination. Type - Outdoor, 28kV, Cable Type - Concentric Neutral/Jacketed Concentric Neutral, Insulation Range - .84 inch - 1.38 inch, Connector Type - Universal Aluminum Barrel for AL or CU Condutor with Copper Wire Lead #2-4/0, Conductor Code - 240 -Stranded or Compressed 1/0 Compact or Solid 2/0. Cable Mounting Bracket - B3 - Stainless Steel - Size 1.45 inch - 1.95 inch.R2T28J2-T0270-B3
Ranger2 Termination. Type - Outdoor, 28kV, Cable Type - Concentric Neutral/Jacketed Concentric Neutral, Insulation Range - .84 inch - 1.38 inch, Connector Type - Universal Aluminum Barrel for AL or CU Condutor with Copper Wire Lead #2-4/0, Conductor Code - 270 -Stranded or Compressed 4/0 Compact or Solid 250. Cable Mounting Bracket - B3 - Stainless Steel - Size 1.45 inch - 1.95 inch.R2T28J4-N0310
Ranger2 Termination for 25/28KV outdoor application, cable insulation diameter 1.30 - 2.10 for Concentric Neural and Jacketed Concentric Neutral Cable, includes Aluminum 2-Hole Spade connector for #2-1250 kcmil, Conductor 400 Stranded/Compressed or 500 Compact/SolidR2T28J2-N0220
Ranger2 Termination for 25/28KV outdoor application, cable insulation diameter .84 - 1.38 inches for Concentric Neural and Jacketed Concentric Neutral Cable, Includes Aluminum 2-Hole Spade connector for #2-1250 kcmil, Stranded or Compressed #2 /Compact or Solid #1Frequently Asked Questions
What is the maximum operating voltage for this termination?
The ABB Ranger2 termination is rated for 28kV, making it suitable for medium-voltage applications.
What cable insulation diameters does this termination support?
This termination supports cable insulation diameters ranging from 0.84 inches to 1.38 inches.
What type of connector is included with this termination?
The termination includes an aluminum 2-hole spade connector.
What conductor sizes are compatible with the spade connector?
The aluminum 2-hole spade connector is compatible with conductor sizes from #2 AWG up to 1250 kcmil.
What cable types is this outdoor termination designed for?
This termination is designed for tape shield, wire shield, and unshielded cable types.
How to Install the R2T28M2-N0250 15kV & 28kV Ranger 2 Shrink fit Silicone Rubber Termination
Installation guide for mounting and wiring the R2T28M2-N0250 15kV & 28kV Ranger 2 Shrink fit Silicone Rubber Termination for indoor/outdoor application with High-K stress relief.
Estimated time: 1h
Tools needed:
Screwdriver, Wire strippers, Utility knife, Measuring tape, Soldering iron, Vinyl tape, Solvent saturated pads, Aluminum oxide abrasive (grit 120 or finer)
Supplies needed:
Silicone Rubber Termination kit, Lubricant, Gray Silicone Rubber Tape, Constant Force Spring, Preformed Ground Braid, Mastic, Copper Foil Tape, Gloves, Aluminum Lug or Connector, System ground connection
- Prepare the Cable
Verify the cable size fits within the insulation range specified in the Termination Selection Chart. Train the cable into position and cut to the required length. Prepare the cable according to the dimensions provided for your specific cable type (Tape Shield, Wire Shield, or UniShield®), ensuring to account for the depth of the terminal lug and any growth allowance for aluminum lugs. For tape shield cables, hold down the edge with copper foil tape to prevent unrolling. For wire shield cables, bend the leading shield wires back onto the jacket. For UniShield® cables, remove the semi-conductive jacket to the specified cut line, taking care not to bell the jacket.
- Install Ground Braid
Apply one band of mastic around the cable jacket 1/4" (6mm) from the jacket end, ensuring it is flush and not overlapped. Position the preformed ground braid with its short tail over the cable shield (tape shield, drain wires, or UniShield® wires) and center the solder block over the mastic strip. Secure the ground braid to the cable jacket with vinyl tape and press the solder block into the mastic. Apply a second mastic band over the solder block and first mastic, maintaining the 1/4" (6mm) dimension. Wrap two half-lapped layers of vinyl tape around the mastic seal. Wrap the ground braid around the cable shield one complete wrap, trim excess, and secure with a constant force spring. Cinch the spring and secure it with two wraps of vinyl tape.
- Install Lug or Connector
Ensure the termination assembly fits over the selected lug. If not, clean the insulation and slide the termination onto the cable before installing the lug. Do not remove the termination core at this time. Position the connector/lug and crimp according to the manufacturer's directions, leaving the last 3/8" to 1/2" uncrimped. Remove excess oxide inhibitor and any sharp edges from the crimp.
- Clean Cable Insulation and Lug Barrel
Wipe the cable insulation with approved solvent pads. Avoid contact with the semi-conductive insulation shield. If an abrasive is necessary, use only aluminum oxide abrasive (grit 120 or finer) on the insulation only, being careful not to reduce the cable insulation diameter below the kit's allowance.
- Install Termination
Create a moisture seal between the termination insulator and the lug/connector using gray silicone rubber electrical tape. Wrap a band of silicone tape around the base of the terminal lug, ensuring no more than 2 layers if the barrel diameter is equal to or greater than the cable primary insulation, or forming the band to match the insulation diameter if the barrel is smaller. Cover the edge of the semi-conductive insulation shield with silicone grease. For lower terminations with a fold-down skirt, pull the removable core through the top until flush with the bottom. Slide the termination body onto the cable, aligning it with the forward edge of the mastic seal. Carefully remove the core by unwinding counter-clockwise, ensuring the termination body is butted up to the mastic seal. Do not push or pull the assembly during core removal. Apply a thin film of silicone lubricant to the skirt and mastic seal area (do not lubricate skirt tabs) and carefully fold down the skirt over the mastic seal. Complete the lug area moisture seal by overlapping the termination insulator by approximately 1" and extending the tape wrapping over a non-crimped region of the lug/connector barrel with a half-lap configuration. Connect the ground braid to the system ground. Confirm that the High-K step does not exceed 1.5".
Frequently Asked Questions about ABB - Installation Products
How are Thomas and Betts products typically installed?
Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.
What accessories are available for Thomas and Betts products?
Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.
What environmental ratings do Thomas and Betts products have?
Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.
What communication protocols do Thomas and Betts products support?
Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.
What are the key features of Thomas and Betts products?
Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.
What are the main product lines offered by Thomas and Betts?
Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.
What technical support does Thomas and Betts offer?
Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.
What industries and applications are Thomas and Betts products used for?
Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.
What certifications and standards do Thomas and Betts products comply with?
Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.
What are the main product lines offered by Ocal?
Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.