ABB Installation Products R2IT15M1-N0260 Ranger2 Termination for 15KV indoor application, cable insulation diameter .64 - 1.12…
UPC: 783786795697
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- 15KV indoor application rating
- Accommodates cable insulation diameter from 0.64 to 1.12 inches
- Compatible with Tape Shield, Wire Shield, and Unshielded cable types
- Supports conductor codes 260 (stranded/compressed 360, compact/solid 4/0)
- Includes Aluminum 2-Hole Spade connector for 1250 kcmil conductors
Specifications
Application | Cable Termination, Indoor Application, 15kV |
Cable Type | Copper Tape Shielded Wire |
Color | Gray |
Conductor Size | 360 kcmil , 4/0 AWG |
Connection Type | Aluminum 2-Hole Spade connector |
Earthing | Products Includes Their Own Grounding System |
Mounting | Product Need to have Cable Holder (not included) |
Number Of Terminals | (1) Single Phase |
Series | Ranger2 |
Size | 0.64 - 1.12 inches (cable insulation diameter) |
Special Features | Silicone Rubber Housing. Lightweight, Compact Design. Pull-Down Tabs for Easy Installation. Thick Wall Construction |
Standard | IEEE 48 |
Type | Cable Termination - Indoor - Ranger2 |
Voltage Rating | 15 kV |
Package Dimensions (L x W x H) | 0.01 IN x 0.01 IN x 0.01 IN |
Package Dimensions (L x W x H) | 0.0254 cm x 0.0254 cm x 0.0254 cm |
Package Weight (Imperial) | 1.0000 L |
Package Weight (Metric) | 0.4540 kg |
R2T15M1N0260
Ranger2 Termination. Type - Outdoor, 15kV, Cable Type - Tape Shield/Wire Shield/ Unshield, Insulation Range - .64 inch - 1.12 inch, Connector Type - Aluminum 2-Hole Spade #2-1250 kcmil, Conductor Code - 260 -Stranded or Compressed 3/0 Compact or Solid 4/0.R2T15J2-N0300-B3
Ranger2 Termination for 15KV outdoor application, cable insulation diameter .84-1.38 inches for Concentric Neural and Jacketed Concentric Neutral Cable, Aluminum 2 Hole Spade #2-1250kcmil, Stranded or Compressed 350 /Compact or Solid 400. Stainless Steel Mounting Bracket 1.45 inch - 1.95 inch (37-50mm)R2IT15M1-N0230
Ranger2 Termination for 15KV indoor application, cable insulation diameter .64 - 1.12 inches for Tape Shield, Wire Shield, and Unshielded Cable, includes Aluminum 2-Hole Spade connector for #2 to 1250 kcmil. #1 Stranded or 1/0 SolidR2T15J4-N0380-B3
Ranger2 Termination for 15KV outdoor application, cable insulation diameter 1.30 - 2.10 inches for Concentric Neural and Jacketed Concentric Neutral Cable, includes Aluminum 2-Hole Spade connector for #2-1250 kcmil, Stranded or Compressed 750/ Compact or Solid 900. Stainless Steel Mounting Bracket 1.45 inch - 1.95 inch (37-50mm)R2T15J2-T0270-B1
Ranger2 Termination for 15KV outdoor application, cable insulation diameter .84 - 1.38 inches for Concentric Neural and Jacketed Concentric Neutral Cable, includes Universal Aluminum Barrel For Aluminum or Copper Conductor with copper wire lead #2-4/0, Stranded or Compressed 4/0/ Compact or Solid 250. Stainless Steel Mounting Bracket .80 inch - 1.25 inch (20-32mm)
R2T35M2-T0230-B3
Ranger2 Termination for 35KV outdoor application, cable insulation diameter .84 - 1.38 inches for Cable Type - Tape Shield, Wire Shield, and Unshielded Cable, includes Universal Aluminum Barrel For Aluminum or Copper Conductor with copper wire lead #2-4/0, Stranded or Compressed #1/ Compact or Solid 1/0 . Stainless Steel Mounting Bracket 1.45 inch - 1.95 inch (35-50mm)R2T15J4-N0330-B2
Ranger2 Termination for 15KV outdoor application, cable insulation diameter 1.30 - 2.10 inches for Concentric Neural and Jacketed Concentric Neutral Cable, includes Aluminum 2-Hole Spade connector for #2-1250 kcmil, Stranded or Compressed 500/ Compact or Solid 600. Plated Mild Steel Mounting Bracket 1.10 inch - 1.50 inch (28-38mm)
R2T35J4-N0330
Ranger2 Termination for 35KV outdoor application, cable insulation diameter 1.30 - 2.10 for Concentric Neural and Jacketed Concentric Neutral Cable, includes Aluminum 2-Hole Spade connector for #2 through 1250 kcmil. Conductor Code 330 - 500 kcmil Stranded/Compressed or 600 kcmil Compact/Solid.Frequently Asked Questions
What cable insulation diameters does this termination support?
This ABB Ranger2 termination supports cable insulation diameters ranging from 0.64 to 1.12 inches.
What types of cables are compatible with this termination?
The Ranger2 termination is compatible with Tape Shield, Wire Shield, and Unshielded cable types.
What conductor sizes can be terminated with this kit?
It supports conductor code 260, including stranded or compressed 360, and compact or solid 4/0 conductors.
What type of connector is included for the conductor?
The kit includes an Aluminum 2-Hole Spade connector suitable for 1250 kcmil conductors.
Is this termination suitable for outdoor use?
No, this ABB Ranger2 termination is specifically designed for 15KV indoor applications.
How to Install the 15kV Ranger 2 Shrink Fit Silicone Rubber Termination
This guide provides step-by-step instructions for installing the R2IT15M1-N0260 15kV Ranger 2 Shrink Fit Silicone Rubber Termination on tape shield, wire shield, or UniShield cables for indoor applications. Ensure all safety precautions are followed.
Estimated time: 1h 30m
Tools needed:
Cable cutter, Wire strippers, Crimping tool, Solvent saturated pads, Aluminum oxide abrasive (grit 120 or finer), Vinyl electrical tape
Supplies needed:
R2IT15M1-N0260 Termination Kit (includes Silicone Rubber Termination, Preformed Ground Braid, Constant Force Spring, Lubricant, Copper Foil Tape, Gloves), Cable connector or lug (compatible with cable and termination), Semi-conductive rubber tape (e.g., Scotch No. 13, if cable has cloth or paper semi-con shield)
- Observe Safety Precautions and Inspect Components
DANGER: All apparatus must be de-energized during installation or removal of parts. Do not touch or move energized products in the work area. This product should be installed only by competent personnel trained in good safety practices involving high voltage electrical equipment. WARNING: This 15kV indoor kit does not restore a moisture-resistant seal to cable termination; use indoor/outdoor kits if moisture resistance is required. Inspect all kit components for damage, correct rating, and compatibility with the cable and mating parts. Ensure all required tools and supplies are at hand and maintain cleanliness throughout the procedure.
- Prepare the Cable
Verify the cable size fits within the insulation range specified in the Termination Selection Chart. Train the cable into its final position and cut it to the required length. Prepare the cable by removing the jacket, semi-conductive layer, and insulation according to the dimensions provided in the instructions (e.g., 9-1/4 inches (235mm) jacket removal, allowing for terminal lug depth and aluminum lug growth allowance). For tape shield cables, prevent the tape shield from unrolling by securing its edge with a single wrap of the supplied copper foil tape. If the cable has a cloth or paper semi-conductive insulation shield, overwrap it with one half-lapped layer of highly stretched semi-conductive rubber tape (e.g., Scotch No. 13).
- Install the Ground Braid
Wrap one band of vinyl tape around the cable jacket 1/4 inch (6mm) from the jacket end to serve as a marker. Position the preformed ground braid with the short tail over the cable shield (tape shield, wire shield, or UniShield wires) and the solder block centered over the vinyl tape marker. Secure the ground braid to the cable jacket using vinyl tape. Apply a second vinyl tape band directly over the original tape marker and ground braid solder block, maintaining the 1/4 inch (6mm) dimension. Wrap the ground braid around the cable shield for one complete wrap, trim any excess to prevent overlap, and secure it in place with the constant force spring. Wrap the spring in the same direction as the ground braid and cinch it after the final winding. Secure the constant force spring with two wraps of vinyl tape.
- Install the Lug or Connector
Before crimping, check that the termination assembly (with its core) will fit over the selected lug. If the lug will not fit through the termination core, clean the cable insulation and slide the termination body onto the cable before installing the lug; do not remove the core at this time. Position the connector or lug and crimp it according to the manufacturer's instructions. Do not crimp the last 3/8 inch to 1/2 inch of the connector. Remove any excess oxide inhibitor and all sharp crimp flashings or edges after crimping.
- Clean Cable Insulation and Lug Barrel
Wipe the cable insulation with solvent-saturated pads, ensuring the solvent does not touch the semi-conductive insulation shield. If abrasive cleaning is necessary, use only aluminum oxide abrasive (grit 120 or finer) on the insulation only. Do not use abrasive on the semi-conductive insulation shield, and be careful not to reduce the cable insulation diameter below that allowed by the kit.
- Install the Termination Body and Connect Ground
Apply a liberal coating of silicone grease to cover the edge of the semi-conductive insulation shield; this silicone fills the step at the semi-con cut-off. Slide the termination body onto the cable. Align the termination's edge (or skirt for wire shield) with the forward edge of the vinyl tape marker. Carefully begin to remove the termination core by pulling counter-clockwise. Recheck the termination position and continue removing the core. Do not push or pull on the termination assembly while removing the core. Finally, connect the ground braid to the system ground.
Frequently Asked Questions about ABB - Installation Products
How are Thomas and Betts products typically installed?
Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.
What accessories are available for Thomas and Betts products?
Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.
What environmental ratings do Thomas and Betts products have?
Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.
What communication protocols do Thomas and Betts products support?
Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.
What are the key features of Thomas and Betts products?
Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.
What are the main product lines offered by Thomas and Betts?
Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.
What technical support does Thomas and Betts offer?
Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.
What industries and applications are Thomas and Betts products used for?
Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.
What certifications and standards do Thomas and Betts products comply with?
Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.
What are the main product lines offered by Ocal?
Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.