
ABB Installation Products R2IT15J4-N2300 15kV, Ranger2 Cable Termination, Indoor, Cable Type - Concentric Neutral/Jacketed…
UPC: 075114336123
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- 15 kV voltage rating for medium voltage applications
- Designed for Concentric Neutral and Jacketed Concentric Neutral cable types
- Accommodates insulation diameters from 1.30 to 2.10 inches (33-53mm)
- N2 two-hole spade connector for copper conductors #2 AWG to 1250 kcmil
- Non-tracking silicone housing with field-removable center core for easy installation
Specifications
Application | Cable Termination, Indoor Application, 15kV |
Cable Type | Concentric Neutral Wire |
Color | Gray |
Conductor Size | 350 to 400 kcmil |
Connection Type | N2 - Copper 2-Hole spade #2-1250 kcmil |
Earthing | Products Includes Their Own Grounding System |
Mounting | Product Need to have Cable Holder (not included) |
Mounting Type | Indoor |
Number Of Terminals | (1) Single Phase |
Series | Ranger2 |
Size | 1.30-2.10 inch (33-53mm) |
Special Features | Silicone Rubber Housing. Lightweight, Compact Design. Pull-Down Tabs for Easy Installation. Thick Wall Construction |
Standard | IEEE 48 |
Type | Cable Termination - Indoor - Ranger2 |
Voltage Rating | 15 kV |
Package Dimensions (L x W x H) | 0.01 IN x 0.01 IN x 0.01 IN |
Package Dimensions (L x W x H) | 0.0254 cm x 0.0254 cm x 0.0254 cm |
Package Weight (Imperial) | 1.0000 L |
Package Weight (Metric) | 0.4540 kg |

R2T15J1-N0300
Ranger2 Termination. Type - Outdoor, 15kV, Cable Type - Concentric Neutral/Jacketed Concentric Neutral, Insulation Range - .64 inch - 1.12 inch, Connector Type - Aluminum 2-Hole Spade #2-1250 kcmil, Conductor Code - 300 -Stranded or Compressed 350 Compact or Solid 400.
R2IT15M1-N0250
Ranger2 Termination. Type - Indoor, 15kV, Cable Type - Tape Shield/Wire Shield/ Unshield, Insulation Range - .64 inch - 1.12 inch, Connector Type - Aluminum 2-Hole Spade #2-1250 kcmil, Conductor Code - 250 -Stranded/Compressed 2/0 or Compact/Solid 3/0.
R2IT15M1-N0270
Ranger2 Termination. Type - Indoor, 15kV, Cable Type - Tape Shield/Wire Shield/ Unshield, Insulation Range - .64 inch - 1.12 inch, Connector Type - Aluminum 2-Hole Spade #2-1250 kcmil, Conductor Code - 270 -Stranded/Compressed 4/0 or Compact/Solid 250.
R2T15M2-N0280-B2
Ranger2 Termination for 15KV outdoor application, cable insulation diameter 0.84 - 1.38 inches for Cable Type - Tape Shield/Wire Shield/ UniShield. Includes Aluminum 2-Hole Spade connector for #2-1250 kcmil, Standard or Compressed 250 /Compact or Solid 300. Stainless Steel Mounting Bracket 1.10 inch - 1.50 inch
R2T28J2-N0250
Ranger2 Termination for 25/28KV outdoor application, cable insulation diameter .84 - 1.38 inches for Concentric Neural and Jacketed Concentric Neutral Cable, Includes Aluminum 2-Hole Spade connector for #2-1250 kcmil, Stranded or Compressed 2/0, Compact or Solid 3/0
PCT1-0260-4-18
15kV, Single Piece Terminator (Class 1), includes Universal Aluminum Rod Contact as standard, Power Cable Termination, Conductor Size - 3/0 Stranded/Compressed or 4/0 Compact/Solid, Use for Insulation Diameter Range from .640 to 1.070 inches. 18 inch contact
PCT21260-4
25kv, Single Piece Terminator (Class 1), includes Aluminum Rod Contact for Aluminum Conductors only, Power Cable Termination, Conductor Size - 3/0 Stranded/Compressed or 4/0 Compact/Solid, Use for Insulation Diameter Range from .830 to 1.180 inches.
PCT10250-3
15kV, Single Piece Terminator (Class 1), Two-Hole Spade Lug. Power Cable Termination, Conductor Size - 2/0 Stranded/Compressed or 3/0 Compact/Solid, Use for Insulation Diameter Range from .640 to 1.070 inches.Frequently Asked Questions
What is the creepage distance of the termination?
The creepage distance for the R2IT15 termination is 8.4 in (213 mm).
What is the voltage rating of the R2IT15 termination?
The R2IT15 cable termination has a voltage rating of 15 kV.
What cable sizes are compatible with R2IT15 terminations?
R2IT15 terminations cover 0.64 in to 2.10 in insulation diameter cables, from #2 AWG through 1250 kcmil.
What is the operating temperature range for this termination?
The ambient temperature range for the R2IT15 termination is -22 to +149 °F (-30 to +65 °C).
What is the maximum altitude for R2IT15 termination installation?
The R2IT15 termination can be installed at a maximum altitude of 3300 feet (1005 m).
What is the power system frequency range?
The power system frequency range for the R2IT15 termination is 48 to 62 Hz.
What is the IEEE classification for this indoor termination?
The R2IT15 indoor termination has an IEEE Classification of Class 2.
What is the maximum design voltage to ground?
The maximum design voltage to ground for the R2IT15 termination is 9.5 kV.
What is the coronal extinction voltage?
The coronal extinction voltage (partial discharge) for the R2IT15 termination is 13 kV (≤ 3pC).
What are the available sizes for the R2IT15 series?
The R2IT15 series is available in sizes 1, 2, and 4.
How to Install the 15kV Ranger 2 Cable Terminator
Complete installation guide for the 15kV Ranger 2 Cable Terminator, designed for indoor applications with concentric and jacketed concentric neutral cables. This indoor kit does not restore a moisture-resistant seal to the cable termination; use indoor/outdoor kits if moisture resistance is required.
Estimated time: 1h 30m
Tools needed:
Wire Strippers, Cutting Tool, Crimping Tool, Gloves
Supplies needed:
Silicone Rubber Termination, Silicone Lubricant, Terminal Lug or Connector, Approved Solvent, Aluminum Oxide Abrasive (optional), Vinyl Tape
- Prepare the Cable
Before starting, ensure all apparatus is de-energized. Check that the cable size fits within the kit's range as shown in the Termination Selection Chart. Train the cable into position and cut it to the required length, allowing sufficient neutral wire length for grounding. Prepare the cable using the provided dimensions, accounting for terminal lug depth and additional exposed conductor distance for aluminum lugs/connectors. Bend neutral wires back and secure them as instructed. DANGER: All apparatus must be de-energized during installation or removal of part(s). Failure to do so will result in serious or fatal injury.
- Install the Terminal Lug or Connector
If using lugs that will not fit through the termination core, clean the insulation and slide the termination onto the cable before installing the lug (do not remove the core yet). Position the connector/lug and crimp it according to the manufacturer’s directions, leaving the last 1/4” to 3/8” uncrimped. After crimping, remove any excess oxide inhibitor and sharp crimp flashings.
- Clean Cable Insulation and Lug Barrel
Wipe the cable insulation with an approved solvent, ensuring the solvent does not touch the semi-con insulation shield. If abrasive cleaning is necessary, use only aluminum oxide abrasive (grit 120 or finer) on the insulation only, not on the semi-con insulation shield. Be careful not to reduce the cable insulation diameter below the kit's allowed range.
- Install the Termination Body
Cover the edge of the semi-con insulation shield with a liberal coating of silicone grease to fill the step at the semi-con cut-off. Slide the terminator body onto the cable, aligning its skirt with the edge of the cable jacket. Carefully begin to remove the core by rotating the lead counter-clockwise while pulling. Recheck the terminator position and continue removing the core. Do not push or pull on the terminator assembly during core removal. Finally, twist the concentric neutral wires together and connect them to the system ground.
Frequently Asked Questions about ABB - Installation Products
How are Thomas and Betts products typically installed?
Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.
What accessories are available for Thomas and Betts products?
Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.
What environmental ratings do Thomas and Betts products have?
Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.
What communication protocols do Thomas and Betts products support?
Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.
What are the key features of Thomas and Betts products?
Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.
What are the main product lines offered by Thomas and Betts?
Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.
What technical support does Thomas and Betts offer?
Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.
What industries and applications are Thomas and Betts products used for?
Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.
What certifications and standards do Thomas and Betts products comply with?
Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.
What are the main product lines offered by Ocal?
Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.