Authorized ABB Distributor (Installation Products)
ABB - Installation Products 274RLR-H-5220 - 25kV 200 Amp, Loadbreak Replacement Elbow Connector with Test Point. Cable Insulation Diameter 0.850 inch to 1.050 inch. Bi-Metal Compression Lug. Conductor Size AWG Compressed Stranded #2/Solid #1/mmSquared 33.62.

ABB Installation Products 274RLR-H-5220 25kV 200 Amp, Loadbreak Replacement Elbow Connector with Test Point. Cable Insulation…

UPC: 783786347346


Documents & Media
BrochureInstallation InstructionsSpecification SheetManufacturer Product Website

Contact for Pricing

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

This ABB Installation Products 25kV, 200 Amp Loadbreak Replacement Elbow Connector (SKU: 274RLR-H-5220) is designed for reliable power system connections. It features an integrated test point for convenient system diagnostics and maintenance. The connector accommodates cable insulation diameters ranging from 0.850 inches to 1.050 inches, ensuring compatibility with a variety of medium-voltage cable constructions. Constructed with a bi-metal compression lug, this elbow connector provides a secure and durable connection for conductors. It is rated for compressed stranded #2 AWG or solid #1 AWG conductors, with a mm² equivalent of 33.62. This specification ensures proper current carrying capacity and mechanical integrity for the intended applications. Key Specifications: - Voltage Rating: 25kV - Current Rating: 200 Amp - Cable Insulation Diameter Range: 0.850" - 1.050" - Connector Type: Loadbreak Elbow with Test Point - Lug Type: Bi-Metal Compression - Conductor Size: AWG Compressed Stranded #2 / Solid #1 (33.62 mm²) This ABB elbow connector is suitable for use in underground distribution systems, substations, and other medium-voltage applications where reliable loadbreak connections are required. The inclusion of a test point simplifies voltage checks and troubleshooting procedures, contributing to efficient system operation and maintenance.
  • 25kV voltage rating for medium-voltage applications.
  • 200 Amp continuous current rating.
  • Integrated test point for diagnostics and maintenance.
  • Accommodates cable insulation diameters from 0.850" to 1.050".
  • Bi-metal compression lug for secure conductor connection.

Specifications

Amperage Rating
200 A
Application
25kV, 200 Amps
Color
Blue
Color
Black
Conductor Range
#2 STR/COMPR AWG , #1 SOL/COMPT AWG
Connection Type
Compression Lug
Current Rating
200 A
Environmental Conditions
Fully Submersible
Insulation
True
Material
Bi-Metal
Material
Housing - EPDM-Rubber
Series
274RLR
Size
0.850 inch - 1.050 inch
Size
Cable Insulation Diameter 0.850 inch to 1.050 inch
Special Features
Replacement Elbow has extended length contact and elbow housing resulting in a net gain of 8-7/8 inches in length. Includes 00400X long Bi-Metal Contact
Standard
ANSI/IEEE Standard 386
Temperature Rating, Maximum
149 F
Temperature Rating, Maximum
65 C
Temperature Rating, Minimum
-40 F
Temperature Rating, Minimum
-40 C
Type
Loadbreak Replacement Elbow Connector with Test Point
Voltage Rating
25 kV
Package Dimensions (L x W x H)
0.01 IN x 0.01 IN x 0.01 IN
Package Dimensions (L x W x H)
0.0254 cm x 0.0254 cm x 0.0254 cm
Package Weight (Imperial)
0.0500 L
Package Weight (Metric)
0.0230 kg
25kV 200 Amp, Loadbreak Elbow Connector with Test Point, .890 inch - 1.220 Inch Cable Insulation Diameter, #2 Stranded Wire Size, Bi-Metal Compression Lug.

262LR-D5220

25kV 200 Amp, Loadbreak Elbow Connector with Test Point, .890 inch - 1.220 Inch Cable Insulation Diameter, #2 Stranded Wire Size, Bi-Metal Compression Lug.
POWER TERMINALS TYPE 3 RENTAL

45030034

POWER TERMINALS TYPE 3 RENTAL
15kV 200 Amp, Loadbreak Replacement Elbow Connector

167RLR-K5270

15kV 200 Amp, Loadbreak Replacement Elbow Connector
200 Amp, 35kV, Loadbreak Elbow Connector with Test Point, Cable Insulation Diameter 1.180 inch to 1.465 inch. Bi-Metal Compression Lug, Conductor Size AWG Compressed Stranded 2/0 /Solid 3/0 /mmSquared 67.43.

376LR-L5250

200 Amp, 35kV, Loadbreak Elbow Connector with Test Point, Cable Insulation Diameter 1.180 inch to 1.465 inch. Bi-Metal Compression Lug, Conductor Size AWG Compressed Stranded 2/0 /Solid 3/0 /mmSquared 67.43.
200 Amp, 15kV, Loadbreak Replacement Elbow Connector without Test Point, Cable Insulation Diameter 0.760 inch to 0.950 inch. Bi-Metal Compression Lug. Conductor Size AWG Compressed Stranded 1/0 /Solid 2/0 /mmSquared 53.49. 200ECS Jacket Seal Included.

167RLR-G-5240-S

200 Amp, 15kV, Loadbreak Replacement Elbow Connector without Test Point, Cable Insulation Diameter 0.760 inch to 0.950 inch. Bi-Metal Compression Lug. Conductor Size AWG Compressed Stranded 1/0 /Solid 2/0 /mmSquared 53.49. 200ECS Jacket Seal Included.
200 Amp, 15kV, Loadbreak Replacement Elbow Connector without Test Point, Cable Insulation Diameter 0.640 inch to 0.820 inch. Bi-Metal Compression Lug. Conductor Size AWG Compressed Stranded #3/Solid #2/mmSquared 26.67.

167RLR-F-5210

200 Amp, 15kV, Loadbreak Replacement Elbow Connector without Test Point, Cable Insulation Diameter 0.640 inch to 0.820 inch. Bi-Metal Compression Lug. Conductor Size AWG Compressed Stranded #3/Solid #2/mmSquared 26.67.
15KV, 200 Amp, Loadbreak Bolted Elbow with Tap, Cable Insulation Diameter 0.980 inch to 1.180 inch. Bi-Metal Compression Lug, Conductor Size AWG Compressed Stranded 4/0 /Solid 250 /mmSquared 126.67.

167LRT-J-5270

15KV, 200 Amp, Loadbreak Bolted Elbow with Tap, Cable Insulation Diameter 0.980 inch to 1.180 inch. Bi-Metal Compression Lug, Conductor Size AWG Compressed Stranded 4/0 /Solid 250 /mmSquared 126.67.
15KV, 200 Amp, Loadbreak Bolted Elbow with Tap, Cable Insulation Diameter 0.760 inch to 0.950 inch. Bi-Metal Compression Lug, Conductor Size AWG Compressed Stranded 4/0 /Solid 250 /mmSquared 126.67.

167LRT-G-5270

15KV, 200 Amp, Loadbreak Bolted Elbow with Tap, Cable Insulation Diameter 0.760 inch to 0.950 inch. Bi-Metal Compression Lug, Conductor Size AWG Compressed Stranded 4/0 /Solid 250 /mmSquared 126.67.

Frequently Asked Questions

Where are these Elastimold elbows manufactured?

Elastimold 200 A repair and replacement elbows are designed, molded, and tested in Albuquerque, New Mexico, USA.

Is a jacket seal available for these connectors?

Yes, they are available with a 200ECS jacket seal included, which is highly recommended. Add an "-S" suffix to the catalog number.

What industry standards do these elbows meet?

These elbows are IEEE 386 compliant, ANSI certified, and Rural Utilities Service (RUS) accepted.

What is the catalog number for the test point cap?

The catalog number for the test point cap is 156-7.

How much length does the repair elbow add?

The repair elbow provides a net gain of 3 1⁄4 inches in length due to its extended-length contact and housing.

How much length does the replacement elbow add?

The replacement elbow provides a net gain of 8 7⁄8 inches in length due to its extended-length contact and housing.

What voltage classes do these elbows support?

These Elastimold loadbreak elbows are designed for 15 kV and 25 kV applications.

What is the current rating of this elbow connector?

The elbow connector is rated for 200 A loadbreak applications.

Is a jacket seal available for these connectors?

Yes, they are available with a 200ECS jacket seal included, which is highly recommended. Add an "-S" suffix to the catalog number.

What voltage classes do these elbows support?

These Elastimold loadbreak elbows are designed for 15 kV and 25 kV applications.

How to Install the 273RLR/274RLR Loadbreak Replacement Elbow Connector

This guide provides step-by-step instructions for the safe installation and wiring of the 273RLR and 274RLR Loadbreak Replacement Elbow Connectors, converting livefront terminations to deadfront for UD cable.

Estimated time: 1h 30m

Tools needed:

Hotstick, Probe wrench, Wire brush, Crimping tool, Wire strippers, Cable cutting tool, Suitable sensing device (for 274RLR voltage test)

Supplies needed:

Replacement Elbow Connector Housing, Compression Lug, Probe, Lubricant (supplied), Hose Clamp, Separate copper wire (No. 14 AWG / 2.5mm), Appropriate connector (for neutral wires), Silicone grease (for test point cap), HV insulated cap(s) or connector(s) (if replacing shipping covers)

  1. De-energize Apparatus and Inspect Components

    DANGER: Ensure all apparatus is de-energized before beginning installation or removal of any parts to prevent serious or fatal injury. Inspect all package contents and components for completeness, damage, proper fit, and compatibility with the cable and mating products. Thread the probe into the compression lug to check for resistance; replace damaged components if resistance is encountered.

  2. Remove Livefront Termination

    Remove the rubber cap from the existing terminator. Cut off the connector at the top of the terminator. Disconnect the ground lead from the base of the terminator, then carefully remove the entire terminator housing from the cable.

  3. Prepare the Cable

    Train the cable to be straight and in-line with the bushing centerline. Measure and cut the cable to precisely 10-1/2 inches from the bushing centerline. Verify the insulation shield measures less than 6-1/2 inches from the end of the cut cable. Carefully remove 1-3/8 inches of cable insulation from the end, ensuring a square cut and avoiding any nicks to the conductor.

  4. Install the Compression Lug

    Wire brush the bare aluminum conductor immediately. Install the compression lug, rotating it to spread the inhibitor. Position the lug so its contact threaded hole aligns with the bushing bore. Crimp the lug according to the crimp chart, starting at the crimp line mark and rotating 180 degrees for each successive crimp. Carefully wipe off any excessive inhibitor from the outside of the lug and cable.

  5. Assemble the Elbow Housing

    Lubricate the cable insulation and the inside of the elbow housing with the supplied lubricant; do not substitute. Slide the elbow connector onto the cable using a back-and-forth twisting motion, then wipe off all excess grease. Align the elbow with the compression lug's threaded hole. Thread the probe into the lug by hand, ensuring it turns freely for approximately four turns before becoming snug. Tighten the probe with the wrench until the wrench bends.

  6. Connect the Concentric Neutral

    Insert one end of a separate No. 14 AWG (2.5mm) copper wire through the grounding eye on the elbow and twist it tight, taking care not to damage the eye. Twist all neutral wires together and connect them to ground using an appropriate connector, ensuring adequate slack for elbow operation. Add the supplied hose clamp as shown in the diagram and tighten it snugly, but do not overtighten.

  7. Connect Elbow to Bushing Plug

    Lubricate the receptacle portion of the elbow connector and the mating bushing with the supplied lubricant ONLY if both the transformer and elbow are known to be de-energized. Securely fasten a hotstick to the loadbreak connector pulling eye. With firm footing and positive control, place the elbow connector receptacle over the bushing plug, inserting the elbow male contact until slight resistance is felt. Immediately push the elbow home with a fast, firm, straight motion to engage the internal lock on the elbow and bushing interface. DO NOT OPERATE BY HAND.

  8. Perform Voltage Test (274RLR Only)

    For 274RLR models, remove the test point cap with a hotstick, peeling it off at an angle. WARNING: The test point is a capacitance device, not directly connected to the conductor. Use a suitable sensing device designed for capacitive test points and follow its manufacturer's directions. Treat the elbow as energized until the 'no voltage' indication is confirmed by other means, as contamination or incorrect equipment can cause false readings. After testing, clean and lubricate the inside surface of the cap with silicone grease and replace it on the test point.

Frequently Asked Questions about ABB - Installation Products

How are Thomas and Betts products typically installed?

Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.

What accessories are available for Thomas and Betts products?

Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.

What environmental ratings do Thomas and Betts products have?

Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.

What communication protocols do Thomas and Betts products support?

Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.

What are the key features of Thomas and Betts products?

Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.

What are the main product lines offered by Thomas and Betts?

Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.

What technical support does Thomas and Betts offer?

Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.

What industries and applications are Thomas and Betts products used for?

Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.

What certifications and standards do Thomas and Betts products comply with?

Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.

What are the main product lines offered by Ocal?

Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.