
ABB Installation Products 274J2(1)-5 200 Amp, 25kV, Loadbreak 2 Point Junction. With U Straps. Revision 1.
UPC: 783786331352
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- 25kV, 200 Amp Loadbreak 2-Way Junction
- Fully shielded, fully submersible molded rubber housing
- 100% peroxide-cured construction with insulation and conductive EPDM materials
- Mating for Elastimold® loadbreak products and elbow connectors
- Includes mounting "U" Straps for installation
Specifications
Amperage Rating | 200 A |
Application | Designed for subsurface, vault or padmount applications and can be used for sectionalizing, looping, tapping, and equipment bypass |
Color | Black |
Connection Type | Loadbreak |
Connection Type | Loadbreak Junction |
Current Rating | 200 A |
Insulation | True |
Material | Molded Rubber (Peroxide-cured insulation, Conductive EPDM) |
Material | EPDM-Rubber, Stainless Steel Mounting Hardware |
Mounting Type | Front or Back Surface Mounting (with U-straps and back plate) |
Poles | 2 |
Series | 274 |
Size | 8.46 inch Depth, 2.50 inch Diameter, 4.00 inch Center to Center |
Special Features | 25kV, 200 Amp Loadbreak 2-Way Junction. Fully shielded, fully submersible molded rubber housing. 100 percent peroxide-cured construction includes insulation and conductive EPDM materials. Provides mating for other Elastimold loadbreak type products. Provides mating for Elastimold Elbow connectors. Mounting U Straps for installation |
Standard | ANSI/IEEE Standard 386 |
Temperature Rating, Maximum | 149 F |
Temperature Rating, Maximum | 65 C |
Temperature Rating, Minimum | -40 F |
Temperature Rating, Minimum | -40 C |
Type | Loadbreak 2-Way Junction with U Straps |
Voltage Rating | 25 kV |
Package Dimensions (L x W x H) | 0.01 IN x 0.01 IN x 0.01 IN |
Package Dimensions (L x W x H) | 0.0254 cm x 0.0254 cm x 0.0254 cm |
Package Weight (Imperial) | 12.0000 L |
Package Weight (Metric) | 5.4430 kg |

K655LR-H0240
600 Amp, 15/25kV, 600 Series Deadbreak, Elbow with Insulated Plug, Cap, Stud, Lug and Cable Adapter. Aluminum Compression Lug. Cable Insulation Diameter 0.850 inch to 1.050 inch. Conductor Size AWG Compressed Stranded 1/0 or Compacted Solid 2/0.
YFC 1/0
Copper Flood-Seal Street and Highway Lighting Compression Fuse and Disconnect Kits - YY-Type, fused, conductor size main 1/0, tap 14-6
SLK 102 M
Flood-Seal Street and Highway Lighting Mechanical Fuse and Disconnect Kits, In-Line Variable-Range, fused, conductor range stranded 1/0-2, and solid 2-14
SDK 2
Copper Flood-Seal Street and Highway Lighting Compression Non-Fused Kits - In-Line, Single Housing, wire size stranded 4 and solid 2
BY 320 C
Aluminum Insulated Y-Type Mechanical Streetlight Connector - Three Conductor, Wire Range #14-2/0 CU-AL, 1-27/32 inch x 3/4 inch x 9/16 inch with (3) 7/16-20 UNF-2B Holes on one side that intersects with (3) 31/64 inch Diameter through holes, includes Gray PVC Boot with dimensions 1-29/32 inch x 2-5/8 inch x 1-1/32 inch and Lubricant.
SDT 2
Copper Flood-Seal Street and Highway Lighting Compression Non-Fused Kits - In-Line, Twin Housing, wire size stranded 2
DYC 4
Flood-Seal Street and Highway Lighting Mechanical Fuse and Disconnect Kits Y-Type with Crimped Lug Connectors, non-fused, wire size stranded 4, copper run, copper tap fused, installing dies 5/16,8,TP,29
DYC 1
Flood-Seal Street and Highway Lighting Mechanical Fuse and Disconnect Kits Y-Type with Crimped Lug Connectors, non-fused, wire size stranded 1 copper run ,copper tap fused, installing dies 3/8,11K,TB,37Frequently Asked Questions
What is the impulse withstand rating?
The impulse withstand rating is 125kV BIL (1.2 x 50 microsecond wave).
What are the typical applications for the 274J2-5?
It is designed for subsurface, vault, or padmount applications. It can be used for sectionalizing, looping, tapping, and equipment bypass.
What is the momentary and fault close rating?
The momentary and fault close rating is 10kA Sym for 10 cycles.
What is the 274J2-5 junction's voltage and current rating?
The 274J2-5 is a 25kV, 200 Amp Loadbreak 2-Way Junction. It is rated for 200-ampere loadmake/loadbreak operation.
What specific Elastimold products are compatible?
It mates with 25kV Family of Elbow Connectors, 370GLR Grounding Elbow, 370TR Test Rod, and 273/274DRG Insulated Cap.
What is the DC 15-minute withstand voltage?
The DC 15-minute withstand voltage is 78kV.
What is the operating voltage of the 274J2-5?
The operating voltage is 15.2kV Phase-to-Ground. It is suitable for use on 25-kV class distribution systems.
What items are included in the 274J2-5 kit?
Each kit contains one basic molded junction, two protective shipping caps, two tubes of lubricant, and one installation instruction.
What is the maximum phase-to-phase voltage?
The maximum phase-to-phase voltage is 26.3kV.
What is the AC one-minute withstand voltage?
The AC one-minute withstand voltage is 40kV.
How to Install 274J2(1), 274J3(1), and 274J4(1) Loadbreak Junctions
This guide provides step-by-step instructions for mounting, grounding, and connecting 25kV class two-, three-, and four-point loadbreak junctions on flat or curved surfaces. DANGER: Ensure all apparatus are de-energized before beginning installation, except for test point caps and indicators.
Estimated time: 1h 30m
Tools needed:
Wrench or Socket, Marking tool, Wire strippers
Supplies needed:
274J2(1), 274J3(1), or 274J4(1) Loadbreak Junction with back plate, Universal mounting brackets with hardware, Lubricant, Mounting bolts (user-supplied, 17/32 inch diameter), Grounding wire (No. 10 Solid to No. 1 Stranded), HV insulated cap(s) or connector(s) (if replacing shipping covers), Elastimold 273DR Insulated Cap (for unused interfaces)
- Mark Mounting Bracket Locations
Loosely attach the universal mounting brackets to the junction back plate. Place the assembled unit against the wall, adjust the brackets for proper alignment, and mark their exact location on the wall.
- Mount Brackets to Wall
Detach the universal mounting brackets from the junction back plate. Securely mount the brackets to the wall using user-supplied bolts (17/32 inch diameter) according to the marks made in Step 1. Note that brackets can be inverted to adjust bolt center distance.
- Fasten Junction Back Plate to Brackets
With the universal mounting brackets securely installed, fasten the junction back plate (with the junction attached) to the mounted brackets. Ensure that the parking stands are in the upright position.
- Adjust Mounting Angle
Adjust the junction's mounting angle to the desired position, which can be from 0 to 90 degrees above or below horizontal in 15-degree increments.
- Secure All Mounting Bolts
Tighten all mounting bolts securely to prevent any movement of the junction during operation.
- Ground the Junction Back Plate
Ground the back plate using the provided grounding lug. This lug accommodates grounding wire sizes from No. 10 Solid to No. 1 Stranded.
- Prepare and Connect Mating Products
Thoroughly wipe the bushing interface clean of any contaminants. Lubricate the interface with the supplied lubricant. Install the mating products (e.g., elbow connectors) to the bushing insert, following the specific instructions provided with those mating products.
- Verify Seating and Cap Unused Interfaces
Verify complete assembly of an insulated cap or elbow by ensuring no portion of the yellow band is visible when viewed from the side. WARNING: If any operating interfaces are not utilized, an Elastimold 273DR insulated cap MUST be installed on the unused interface(s) before energization. Do NOT use protective shipping covers for this purpose as they are not insulated.
Frequently Asked Questions about ABB - Installation Products
How are Thomas and Betts products typically installed?
Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.
What accessories are available for Thomas and Betts products?
Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.
What environmental ratings do Thomas and Betts products have?
Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.
What communication protocols do Thomas and Betts products support?
Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.
What are the key features of Thomas and Betts products?
Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.
What are the main product lines offered by Thomas and Betts?
Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.
What technical support does Thomas and Betts offer?
Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.
What industries and applications are Thomas and Betts products used for?
Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.
What certifications and standards do Thomas and Betts products comply with?
Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.
What are the main product lines offered by Ocal?
Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.