
ABB Installation Products 274FLR3-C5250 Molded Current Limiting Fuse Housing, Nominal Fuse Voltage Rating 17.2kV, Fuse Test Port…
UPC: 075114427005
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- Nominal Fuse Voltage Rating: 17.2kV
- Fuse Test Port: Two Capacitive Test Ports
- Cable Insulation Diameter Range: 0.805 inch - 1.060 inch / 20mm - 27mm
- Copper Lug for Conductor Size: 2/0 AWG Stranded Compressed, 3/0 AWG Solid Compact
- Manufacturer: ABB - Installation Products
Specifications
Amperage Rating | 200 A |
Application | Protect Light Duty Underground Distribution Systems |
Color | Black |
Conductor Range | 2/0 STR/COMPR AWG , 3/0 SOL/COMPT AWG |
Connection | Compression |
Connection Type | Fuse Housing |
Insulation | True |
Length | 21.12 in |
Length | 536.448 mm |
Material | EPDM-Rubber |
Material | Copper |
Series | 274FLR3 |
Size | Cable Insulation Diameter 0.805-1.060 inch / 20-27mm, Conductor Size 2/0 AWG Stranded Compressed, 3/0 AWG Solid Compact |
Special Features | Full-Range Current-Limiting Fusing with 50kA Interrupting Capability. Hotstick Operable 25/28kV Loadbreak Elbow Switching |
Standard | IEEE 386, ANSI C37.40, ANSI C37.41, ANSI C37.47 |
Temperature Rating, Maximum | 149 F |
Temperature Rating, Maximum | 65 C |
Temperature Rating, Minimum | -40 F |
Temperature Rating, Minimum | -40 C |
Type | Loadbreak Fused Elbow Connector with Test Point |
Voltage Rating | 17.2 kV |
Voltage Rating | 15.5 to 16.2 kV |
Package Dimensions (L x W x H) | 0.01 IN x 0.01 IN x 0.01 IN |
Package Dimensions (L x W x H) | 0.0254 cm x 0.0254 cm x 0.0254 cm |
Package Weight (Imperial) | 1.0000 L |
Package Weight (Metric) | 0.4540 kg |

168FLR3B0250
Molded Current Limiting Fuse Housing, Nominal Fuse Voltage Rating 8.3kV, Fuse Test Port - Two Capacitive Test Ports, Large Housing, Cable Insulation Diameter 0.635 inch - 0.905 inch / 16-23mm, Aluminum Conductor size 2/0 AWG Stranded/Compressed, 3/0 AWG Solid/Compact.
756LR-NAC04
35kV, 600 Amp, Elbow Connector with Test Point - with Shear Bolt Connector. Includes Elbow Housing, Insulated Plug with Cap, Stud, Shearbolt Lug, Cable Adapter and Lubricant. Cable Insulation Diameter N - 1.515 to 1.780 inch. Tin-Plated Aluminum ShearBolt Lug, Conductor Size AC04 - 750 to 1250 kcmil Stranded/Compressed/Solid/Compact.
756ETP-J0240-DRG-S
600 Amp, 35kV, Deadbreak, Window Op With Test Point, Elbow Tap Plug, Aluminum Compression Lug. Cable Insulation Diameter 0.980 inch to 1.180 inch. Conductor Size AWG, Compressed Stranded 1/0 Compacted Solid 2/0. With Insulated Cap and Cold-Shrinkable Jacket Seal.
K656ETP-P0410-DRG
600 Amp, 25kV, Deadbreak Elbow, Test and Ground Replacement Kit with Test Point. Cable Insulation Diameter 1.725 inch to 1.935 inch. Aluminum Compression Lug. Conductor Size AWG Compressed Stranded 1000 kcmil. With Insulated Cap.
K655DLR-M0380-S
15/25kV, Deadbreak, 600 Series Direct Test Elbow with Insulated Plug, Cap, Stud, Lug and Cable Adapter. Cable Insulation Diameter 1.370 inch to 1.630 inch. Aluminum Compression Lug. Conductor Size kcmil, Compressed Stranded 700/750 kcmil or Solid/Compacted 900 kcmil. Cold Shrinkable Jacket Seal.
162A4-B5220
15kV, 200 Amp, Loadbreak Elbow with Bushing Insert Kit with Test Point, Cable Insulation Diameter B - 0.635 to 0.905 inch (16.13-22.99mm). Bi-Metal Compression Lug, Conductor Size 220 - #2 Stranded/Compressed or #1 Solid/Compact.
756LR-K2270-SG3
35kV 600 Series Deadbreak Elbow with Test Point (with Insulated Plug, Cap, Stud, Lug and Cable Adapter). Copper Compression Lug. Cable Insulation Diameter 1.090 inch to 1.310 inch. Conductor Size Compressed-Stranded 4/0 AWG Compacted-Solid 250 kcmil. Cold Shrinkable Seal with Copper Braid and Constant Force Spring Included.
376LR-H-2240-S
200 Amp, 35kV, Loadbreak Elbow Connector with Test Point and Sealing Kit, Cable Insulation Diameter 0.850 inch to 1.050 inch. Copper Compression Lug, Conductor Size AWG Compressed Stranded 1/0 /Solid 2/0 /mmSquared 53.49. 200ECS Jacket Seal Included.Frequently Asked Questions
What are the applications of the Elastimold 274FLR?
The Elastimold 274FLR protects light duty underground distribution systems, including sub-loops and radial taps. It replaces existing 200 Amp loadbreak tap elbows.
Is the fuse included with the 274FLR elbow connector?
No, the fuse for the 274FLR elbow connector must be ordered separately.
What sealing kit is used for Jacketed Concentric Neutral Cables?
For Jacketed Concentric Neutral Cables, the sealing kit is 200ECS or suffix "-S" for cables with a nominal O.D. between 0.80 in and 1.50 in.
Are sealing and grounding kits required for the 274FLR?
For safety purposes, a sealing and grounding kit is highly recommended with the loadbreak elbow.
How is the insulation letter code (W) determined?
The insulation letter code is selected by determining the cable's insulation diameter and choosing the code that best straddles that diameter from the W table.
How do I select the correct housing size for the 274FLR?
The housing size is selected based on the desired fuse size and voltage, as detailed in the Housing H Code table.
What items are included in each 274FLR kit?
Each kit includes an elbow connector housing, crimp connector, probe lug, lubricant tubes, installation instructions, a crimp chart, and a V.D Cap-Peroxide.
How is fuse replacement handled on the 274FLR?
The 274FLR features a split center section for easy fuse replacement.
Does the 274FLR have a feature for blown fuse indication?
Yes, the 274FLR has built-in voltage test points for quick and convenient blown fuse indication.
Is the 274FLR fused elbow submersible?
Yes, the 274FLR fused elbow is fully sealed and submersible when used with ECS series sealing kits.
How to Install the 274FLR Loadbreak Fused Elbow Connector
This guide provides step-by-step instructions for the safe and proper installation of the 274FLR Loadbreak Fused Elbow Connector, including cable preparation, component assembly, and final connection.
Estimated time: 1h 30m
Tools needed:
Probe Wrench, Allen Wrench, Wire Brush, Crimp Tool, Wire Strippers, Hotstick
Supplies needed:
Cable Half Housing, Elbow Half Housing, Fuse, Compression Lug, Probe, Probe Connector, Hose Clamp, Lubricant, No. 14 AWG Copper Wire, Appropriate Cable Seal (optional)
- Perform Pre-Installation Checks and Safety
DANGER: Ensure all apparatus is de-energized before beginning installation to prevent serious or fatal injury. This product must be installed only by competent personnel trained in high voltage electrical equipment safety practices. Inspect all parts for damage, correct rating, and compatibility with mating components. Check package contents to ensure completeness. Verify proper fit of all components with the cable and/or mating products. Test threads by hand-threading the probe into the compression lug; if resistance is encountered, check for damage and replace the component. Gather all required tools and maintain cleanliness throughout the procedure.
- Prepare the Cable for Termination
Using the bushing centerline as a reference, cut excess cable off 20 inches minimum beyond the bushing. If using an optional 200ECS Cold Shrink Cable Seal, slide it onto the cable now. Remove the cable jacket from the excess cable length remaining AND the distance of "A" (fuse body length) plus 7-3/8 inches from the bushing centerline. If a Cable Seal kit is used, follow its specific instructions. Otherwise, unwrap and fold the concentric neutral wires back over the jacket, then bind them securely. Squarely cut off the cable a distance of "A" (11-1/2 inches for FLR-1 or 15-3/4 inches for FLR-3) from the bushing centerline, leaving a minimum of 7-3/8 inches of cable to terminate.
- Prepare Cable End and Install Compression Lug
Cut 1-1/8 inches from the cable end, ensuring a square cut and taking extreme care not to nick the conductor. Wire brush the bare aluminum conductors thoroughly and immediately install the compression lug. Rotate the lug to spread the inhibitor. Crimp the unthreaded end of the compression lug to the conductor. Refer to the crimp chart provided with the compression lug for recommended crimp tool information. Start crimping at the crimp line mark and rotate 180 degrees for each successive crimp. Carefully wipe any excess inhibitor from the outside of the lug and cable. Remove the insulation shield 5-1/2 inches from the end of the lug. Bevel the insulation end a maximum of 1/8 inch. Thoroughly clean the insulation to remove all traces of conductive residue.
- Lubricate and Insert Cable into Cable Half Housing
Apply the supplied lubricant to the outside of the connector, the cable insulation, the conductive shield, and the cable entrance end of the Fused Elbow cable half. DO NOT SUBSTITUTE the lubricant. Insert the prepared connector and cable into the cable half of the Fused Elbow until the top end of the connector protrudes beyond surface “A” of the housing.
- Install and Tighten the Fuse
Insert the threaded terminal end of the fuse into the cable half of the Fused Elbow and thread it into the cable connector. HAND TIGHTEN the fuse. CAUTION: The fuse stud will fracture if over-torqued. Pull the cable half housing up against the bottom of the tightened fuse.
- Assemble and Lock the Probe Connector
Assemble the probe connector to the fuse terminal. Rotate the probe connector so that its flats are perpendicular to the bushing with which it will mate. Lock the probe connector in position by tightening the setscrews using the special torque limiting allen wrench supplied in the fuse kit. Rotate the cable half of the Fused Elbow so that its test point is perpendicular to the flats on the probe connector.
- Join Elbow Halves and Install Probe
Apply lubricant to the elbow half of the fused elbow and assemble it to the cable half. The cuff of the cable half will overlap the elbow half by 3/4 inch. Ensure the probe connector faces the opening of the fused elbow half and that the two test points are aligned. Insert the probe into the probe connector. It may be necessary to push on the cable to align the probe with the fuse. Start the threads by hand, taking care not to cross-thread the probe. Tighten the probe using the special torque limiting allen wrench supplied. Insert the short end of the wrench into the hole in the probe and tighten until the wrench bends and remains bent. Position the hose clamp as shown in the installation diagram and tighten it. DO NOT OVERTIGHTEN.
- Connect Concentric Neutral Wires
Insert one end of a separate copper wire (No. 14 AWG / 2.5mm or equivalent) through each grounding eye on both the elbow housing and cable housings. Twist tightly, taking care not to damage the eyes. If used, finish installing the 200ECS jacket seal according to its instructions. Twist all neutral wires together, exercising care not to damage the grounding eyes, and connect them to ground using an appropriate connector. Provide adequate slack in the wires for elbow operation.
- Final Connection to Bushing Plug
Lubricate the receptacle portion of the elbow connector and the mating bushing with the supplied lubricant. IMPORTANT: Lubricate only if the transformer and elbow are known to be de-energized. Operate the connection using a full insulated “hotstick” type live-line tool. DO NOT OPERATE BY HAND.
Frequently Asked Questions about ABB - Installation Products
How are Thomas and Betts products typically installed?
Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.
What accessories are available for Thomas and Betts products?
Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.
What environmental ratings do Thomas and Betts products have?
Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.
What communication protocols do Thomas and Betts products support?
Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.
What are the key features of Thomas and Betts products?
Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.
What are the main product lines offered by Thomas and Betts?
Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.
What technical support does Thomas and Betts offer?
Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.
What industries and applications are Thomas and Betts products used for?
Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.
What certifications and standards do Thomas and Betts products comply with?
Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.
What are the main product lines offered by Ocal?
Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.