Contact for Pricing
Overview
- Designed for cable diameters from 1.575 to 1.685 inches
- Provides secure tape and lead shield connection
- Ensures effective insulation for shielded cables
- Manufactured by ABB - Installation Products
- Essential for maintaining signal integrity and preventing interference
Specifications
Application | Used to Mate and Install the Cable to an Elastimold Product |
Connection | Slide-On |
Material | EPDM-Rubber |
Size | Cable Insulation Diameter 1.575 to 1.685 inches |
Size | 1.575 to 1.685 inches |
Standard | ANSI/IEEE Standard 386 |
Temperature Rating, Maximum | 149 F |
Temperature Rating, Maximum | 65 C |
Temperature Rating, Minimum | -40 F |
Temperature Rating, Minimum | -40 C |
Type | Shield Adapter |
Package Dimensions (L x W x H) | 0.01 IN x 0.01 IN x 0.01 IN |
Package Dimensions (L x W x H) | 0.0254 cm x 0.0254 cm x 0.0254 cm |
Package Weight (Imperial) | 0.2000 L |
Package Weight (Metric) | 0.0910 kg |
K650RTW
15/25kV 600 Series Deadbreak Reducing Tap Well. Length 5.37 inch. Width 3 inch not counting bracket. 600/200 Amps
Frequently Asked Questions
What insulation diameter does the 10TL-KB adapter support?
The 10TL-KB adapter supports Unishield cables with an insulation diameter from 1.575 inches to 1.685 inches (40.0 mm to 42.8 mm).
What is the insulation diameter range for the 10TL-GB adapter?
The 10TL-GB adapter is for Unishield cables with an insulation diameter between 0.875 inches and 0.985 inches (22.2 mm to 25.0 mm).
What insulation diameter does the 10TL-KB adapter support?
The 10TL-KB adapter supports Unishield cables with an insulation diameter from 1.575 inches to 1.685 inches (40.0 mm to 42.8 mm).
What is the insulation diameter range for the 10TL-GB adapter?
The 10TL-GB adapter is for Unishield cables with an insulation diameter between 0.875 inches and 0.985 inches (22.2 mm to 25.0 mm).
What insulation diameter does the 10TL-KB adapter support?
The 10TL-KB adapter supports Unishield cables with an insulation diameter from 1.575 inches to 1.685 inches (40.0 mm to 42.8 mm).
What is the insulation diameter range for the 10TL-GB adapter?
The 10TL-GB adapter is for Unishield cables with an insulation diameter between 0.875 inches and 0.985 inches (22.2 mm to 25.0 mm).
What is the 10TL-W cable adapter used for?
The 10TL-W is a shield adapter designed for Unishield Cables.
How do I select the correct 10TL-W part number?
The "W" letter code in the 10TL-W part number is determined by the insulation diameter of the Unishield cable. Refer to the provided table for the correct code.
What is the 10TL-W cable adapter used for?
The 10TL-W is a shield adapter designed for Unishield Cables.
How do I select the correct 10TL-W part number?
The "W" letter code in the 10TL-W part number is determined by the insulation diameter of the Unishield cable. Refer to the provided table for the correct code.
How to Install the 10TL Adapter for Flat Metallic Tape Shielded Cables
This guide details the installation of the 10TL adapter for connecting and/or terminating cables with flat metallic tape insulation shields. It is a required supplement to the ELASTIMOLD distribution product instructions. All apparatus must be de-energized during installation and handled by competent personnel trained in high voltage electrical equipment.
Estimated time: 1h
Tools needed:
Wire strippers, Knife, Soldering iron
Supplies needed:
10TL Adapter housing, Lubricant (DO NOT SUBSTITUTE), 3/4" (19mm) wide PVC insulating electrical tape, Vinyl plastic electrical tape, Approved safety solvent, Clean rag, #14 AWG (2.08mm²) wire, Grounding lead, Electrical insulating tape
- Prepare the Cable Outer Jacket
Refer to the ELASTIMOLD product instructions for the semiconductive shield removal dimension. Remove the cable's outer jacket a distance of 2 inches (51mm) more than this specified dimension.
- Remove Metallic Tape
Carefully remove the metallic tape to a point 3/4 inch (19mm) from the edge of the outer jacket.
- Remove Semiconducting Tape
Remove the semiconducting tape to a point 1 inch (25mm) from the edge of the outer jacket, exposing the cable insulation.
- Apply Retainer and Marker Tapes
Wrap 1-1/2 to 2 turns of 3/4 inch (19mm) wide PVC insulating electrical tape over the semiconducting and metallic tapes, 1/2 inch (13mm) from the edge of the outer jacket, to serve as a tape retainer. Then, wrap 2 turns of vinyl plastic electrical tape over the outer jacket, 1 inch (25mm) from its edge, to create a tape marker.
- Clean and Lubricate Cable and Adapter
Thoroughly clean the outer jacket and insulation to remove all traces of semiconducting residue using a clean rag soaked with an approved safety solvent. Always wipe from the end of the cable toward the outer jacket. Lubricate the prepared cable end and the inside of the 10TL adapter with the supplied lubricant.
- Slide Adapter onto Cable
Slide the 10TL adapter onto the cable with a forward side-to-side twisting motion until it is flush with the tape marker. The step on the adapter will serve as a marker for subsequent ELASTIMOLD product assembly.
- Install ELASTIMOLD Product
Install the ELASTIMOLD distribution product by following the specific installation instructions supplied with that product. After installation, a maximum gap of 1/8 inch (3mm) between the ELASTIMOLD product and the adapter's step is permissible.
- Remove Tape Marker
After the ELASTIMOLD product has been successfully assembled, remove the vinyl plastic electrical tape marker from the cable.
- Ground the Metallic Shielding Tape
Approximately 2 inches (51mm) back from the end of the adapter, remove 1-1/2 inches (38mm) of the outer jacket. Using #14 AWG (2.08mm²) wire and a grounding lead, fasten the grounding lead to the metallic shielding tape by making several wraps with the #14 AWG wire. Solder the ground lead to the metallic tape, taking care to avoid excessive heat that could damage the cable. After soldering, wrap the soldered area with electrical insulating tape, overlapping each cable jacket approximately 1-1/2 inches (38mm).
Frequently Asked Questions about ABB - Installation Products
How are Thomas and Betts products typically installed?
Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.
What accessories are available for Thomas and Betts products?
Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.
What environmental ratings do Thomas and Betts products have?
Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.
What communication protocols do Thomas and Betts products support?
Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.
What are the key features of Thomas and Betts products?
Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.
What are the main product lines offered by Thomas and Betts?
Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.
What technical support does Thomas and Betts offer?
Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.
What industries and applications are Thomas and Betts products used for?
Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.
What certifications and standards do Thomas and Betts products comply with?
Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.
What are the main product lines offered by Ocal?
Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.