ABB Installation Products 10-TL-HJ Tape and Lead - Shield Adapter, Cable Accessory, Insulation 1.160 to 1.305 inches
UPC: 783786636235
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- Designed for tape and lead shielded cables (1.160–1.305" diameter)
- Ensures continuous insulation and mechanical protection
- Compatible with ABB 10-TL series
- Eliminates need for complex splicing or additional hardware
- Ideal for power distribution, control, and instrumentation systems
Specifications
Application | Used to Mate and Install the Cable to an Elastimold Product |
Connection | Slide-On |
Material | EPDM-Rubber |
Size | Cable Insulation Diameter 1.160 to 1.305 inches |
Standard | ANSI/IEEE Standard 386 |
Temperature Rating, Maximum | 149 F |
Temperature Rating, Maximum | 65 C |
Temperature Rating, Minimum | -40 F |
Temperature Rating, Minimum | -40 C |
Type | Shield Adapter |
Package Dimensions (L x W x H) | 0.01 IN x 0.01 IN x 0.01 IN |
Package Dimensions (L x W x H) | 0.0254 cm x 0.0254 cm x 0.0254 cm |
Package Weight (Imperial) | 0.1500 L |
Package Weight (Metric) | 0.0680 kg |
K675TBC
15/25kV, 900 Amp, Deadbreak Bushing for In-Air Applications (Pad-Mounted or Vault-Type or Submersible Transformers or Switchgear). One Factory installed 5/8-11 UNC-2A Stud included, other Stud must be Purchased Separately. Overall Length 13.75 inch, Diameter 4.50 inch. Molded Epoxy with Stainless Steel Flange. Boot and Collar.
10-TL-HAB
Tape and Lead - Shield Adapter, Cable Accessory, Cable Insulation Diameter 1.040 inch to 1.175 inchFrequently Asked Questions
What insulation diameter does 10TL-GB support?
The 10TL-GB adapter supports Unishield cables with an insulation diameter between 0.875 in and 0.985 in (22.2 mm and 25.0 mm).
What insulation diameter does 10TL-HJ support?
The 10TL-HJ adapter supports Unishield cables with an insulation diameter between 1.160 in and 1.305 in (29.5 mm and 33.1 mm).
What cable type is compatible with 10TL-W adapters?
The 10TL-W adapters are specifically designed for Unishield Cables.
How is the 10TL-W part number determined?
The "W" letter code in the 10TL-W part number is determined by the insulation diameter of the Unishield cable.
What is the 10TL-W product?
The 10TL-W is a 15kV Unishield Cable adapter. The "W" code specifies the adapter based on the cable's insulation diameter.
What is the 10TL-W product?
The 10TL-W is a 15kV Unishield Cable adapter. The "W" code specifies the adapter based on the cable's insulation diameter.
How is the 10TL-W part number determined?
The "W" letter code in the 10TL-W part number is determined by the insulation diameter of the Unishield cable.
What cable type is compatible with 10TL-W adapters?
The 10TL-W adapters are specifically designed for Unishield Cables.
What insulation diameter does 10TL-HJ support?
The 10TL-HJ adapter supports Unishield cables with an insulation diameter between 1.160 in and 1.305 in (29.5 mm and 33.1 mm).
What insulation diameter does 10TL-GB support?
The 10TL-GB adapter supports Unishield cables with an insulation diameter between 0.875 in and 0.985 in (22.2 mm and 25.0 mm).
How to Install the 10TL Adapter for Flat Metallic Tape Shielded Cables
This guide provides step-by-step instructions for installing the 10TL adapter on cables with semiconducting tape insulation shields and flat metallic tape drains, ensuring proper preparation and connection with Elastimold distribution products. Always de-energize apparatus before installation.
Estimated time: 1h
Tools needed:
Wire strippers, Knife, Measuring tape or ruler, Rag, Soldering iron
Supplies needed:
10TL Adapter housing, Lubricant (DO NOT SUBSTITUTE), Approved safety solvent, 3/4" (19mm) wide PVC insulating electrical tape, Vinyl plastic electrical tape, #14 AWG (2.08mm²) wire, Grounding lead, Solder, Electrical insulating tape, ELASTIMOLD distribution product (mating part)
- Prepare the Cable Outer Jacket
Refer to the Elastimold product's instructions for the semiconductive shield removal dimension (typically in Step 2). Remove the cable's outer jacket a distance of 2 inches (51mm) more than this specified dimension. Ensure all apparatus is de-energized before proceeding.
- Remove Metallic Tape
Remove the metallic tape from the cable, leaving 3/4 inch (19mm) of metallic tape from the edge of the outer jacket.
- Remove Semiconducting Tape
Remove the semiconducting tape from the cable, leaving 1 inch (25mm) of semiconducting tape from the edge of the outer jacket.
- Apply Retainer and Marker Tapes
Wrap 1-1/2 to 2 turns of 3/4 inch (19mm) wide PVC insulating electrical tape over the semiconducting and metallic tapes, 1/2 inch (13mm) from the edge of the outer jacket, to serve as a retainer. Then, wrap 2 turns of vinyl plastic electrical tape over the outer jacket, 1 inch (25mm) from its edge, to create a tape marker.
- Clean and Lubricate Cable and Adapter
Clean the outer jacket and thoroughly clean the insulation to remove all semiconducting residue. Use a rag soaked with an approved safety solvent, wiping from the cable end toward the outer jacket. Lubricate the prepared cable and the inside of the 10TL adapter using the supplied lubricant (DO NOT SUBSTITUTE).
- Slide Adapter onto Cable
Slide the adapter onto the cable using a forward side-to-side twisting motion. Continue until the adapter is flush with the tape marker. The step on the adapter will serve as a marker for assembling the ELASTIMOLD product.
- Install the ELASTIMOLD Product
Install the ELASTIMOLD product by following the specific installation instructions provided with that product. After installation, a maximum gap of 1/8 inch (3mm) between the ELASTIMOLD product and the step on the adapter is permissible.
- Remove Tape Marker
After the ELASTIMOLD product has been assembled, remove the tape marker from the cable.
- Ground Metallic Shielding Tape
Approximately 2 inches (51mm) back from the end of the adapter, remove 1-1/2 inches (38mm) of the outer jacket. Use #14 AWG (2.08mm²) wire to fasten a grounding lead to the metallic shielding tape by making several wraps. Solder the ground lead to the metallic tape, avoiding excessive heat to prevent cable damage. After soldering, wrap the soldered area with electrical insulating tape, overlapping each cable jacket by approximately 1-1/2 inches (38mm). WARNING: UNGROUNDED SHIELDS ARE DANGEROUS.
Frequently Asked Questions about ABB - Installation Products
How are Thomas and Betts products typically installed?
Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.
What accessories are available for Thomas and Betts products?
Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.
What environmental ratings do Thomas and Betts products have?
Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.
What communication protocols do Thomas and Betts products support?
Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.
What are the key features of Thomas and Betts products?
Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.
What are the main product lines offered by Thomas and Betts?
Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.
What technical support does Thomas and Betts offer?
Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.
What industries and applications are Thomas and Betts products used for?
Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.
What certifications and standards do Thomas and Betts products comply with?
Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.
What are the main product lines offered by Ocal?
Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.