Showing 1033-1044 of 1,436 results

ABB - Installation Products · ABB
K650BIPBN
25 kV, 600 Amps, Basic Insulating Plug. Epoxy. Length 4-1/2 inch long, Widest Diameter 3 inch.
Contact for Pricing

ABB - Installation Products · ABB
J3-226-35-N
3 Point Junction, with two 200 Amp Bushing Well Interfaces and one 600 Amp Bushing Interface, 35kV, No Parking Stand.
Contact for Pricing

ABB - Installation Products · ABB
EM-00700270CS1116P
15 to 35 kV, Pin Terminal for PCT. With 18 inch long Copper Rod after Crimping. Assembled Length 21-1/4 inch. Pin Diameter 1/2 inch.
Contact for Pricing

ABB - Installation Products · ABB
00700270-CS1116
15 to 35 kV, Pin Terminal for PCT. With 18 inch long Copper Rod after Crimping. 4/0 AWG STR COMPR. Installing Dies 298, 840. CU - AL. Oxide Inhibitor Compound. Overall Length 21-1/4 inch. Rod Diameter .5 inch. Widest Diameter .875 inch.
Contact for Pricing

ABB - Installation Products · ABB
J4-2222-25-N
4 Point Junction, with (4) 200 Amp Bushing Well Interfaces, 25kV, No Parking Stand. Standard 4 inch Spacing
Contact for Pricing

ABB - Installation Products · ABB
L1601-PC-T2R
35kv, Long Shank Well Without Bail Tabs and With Replaceable Well Stud (9-1/4 inch Bushing Shank Length)
Contact for Pricing
Minimum Qty: 25
Multiplier: 25
*Contact for lower quantities*

Contact for Pricing

ABB - Installation Products · ABB
L1601-PC-S2
35kv, Short Shank Well without Bail Tabs and Non-Replaceable Well Stud (2-3/4 inch Bushing Shank Length), side mount
Contact for Pricing

ABB - Installation Products · ABB
750GP
35kV 600 Amp Series Deadbreak Grounding Plug (2.29 Foot (27.48 inch) 1/0 AWG Grounding Cable)
Contact for Pricing

ABB - Installation Products · ABB
750T1
600 Amp, Long Shank Bushing without Stud, 35kV, 8-9/16 inch long
Contact for Pricing

ABB - Installation Products · ABB
K650LB
25kV 600 Series Deadbreak Insulating Plug / Stand-Off Plug, includes Silicone Lubricant and Instructions. Length 3.9.39 inch, Widest Diameter 3 inch. Epoxy.
Contact for Pricing

ABB - Installation Products · ABB
K675S1
15/25kV, 900 Amp, Deadbreak, Short Shank Bushing for In-Oil and SF6 Applications (Pad-Mounted or Vault-Type or Submersible Transformers or Switchgear). One Factory installed 5/8-11 UNC-2A Stud included, other Stud must be Purchased Separately. Overall Length 8.12 inch, Diameter 4.50 inch. Molded Epoxy with Stainless Steel Flange.
Contact for Pricing
Minimum Qty: 9
Multiplier: 9
*Contact for lower quantities*