UPC: 783786624522
Contact for Pricing
Overview
- 25kV Voltage Rating for high-voltage applications
- Durable Epoxy construction for robust insulation
- 600 Series compatibility
- Compact dimensions: 3.939" Length, 3" Widest Diameter
- Includes Silicone Lubricant and Instructions for easy installation
Specifications
Application | The K650LB is designed to provide a threaded mountable plug for use in cam-op cable joint kits. The K650LB is threaded onto the hardware aligning bracket and the retaining sleeves are threaded into bushing |
Material | EPDM-Rubber |
Size | 3.00 inch (76.2 mm) Diameter, 3.89 inch (98.8 mm) Length |
Special Features | Fully rated 25kV, 600 Amp Deadbreak Insulated Plug. 100 percent peroxide-cured construction includes insulation and conductive EPDM materials. Can be easily connected or disconnected using standard hand tools and equipment in a de-energized state. Optional accessories allow visible external separation, by-pass, isolation, dead-ending, grounding, and testing as well as adding taps, surge arrestors, and circuit protection |
Standard | ANSI/IEEE Standard 386 |
Type | Insulating Plug |
Package Dimensions (L x W x H) | 0.01 IN x 0.01 IN x 0.01 IN |
Package Dimensions (L x W x H) | 0.0254 cm x 0.0254 cm x 0.0254 cm |
Package Weight (Imperial) | 0.0010 L |
Package Weight (Metric) | 0.0010 kg |
K650RTW
15/25kV 600 Series Deadbreak Reducing Tap Well. Length 5.37 inch. Width 3 inch not counting bracket. 600/200 Amps
655BEA3
15kV 600 Series Loadbreak Stick-Op Bushing Adapter, Window OP CA, 600AT assembly tool required for operation and/or installation of Stick-Op.
K1601PCC-R
15/25KV, Molded Epoxy Flange for gasketed clamp mounting only, with Replaceable Well Stud, Bushing Well
K650TBC
15/25kV, 600 Amp, Deadbreak Bushing for In-Air Applications (Pad-Mounted or Vault-Type or Submersible Transformers or Switchgear). One Factory installed 5/8-11 UNC-2A Stud included, other Stud must be Purchased Separately. Overall Length 13.75 inch, Diameter 4.50 inch. Molded Epoxy with Stainless Steel Flange. Includes Boot and Collar.
K1601-PC-S2R
15/25kv, Short Shank Well without Bail Tabs and with Replaceable Well Stud (2-3/4 inch Bushing Shank Length)Frequently Asked Questions
What is the voltage rating of the K650LB insulating plug?
The ABB K650LB insulating plug has a voltage rating of 25kV.
What material is the K650LB deadbreak insulating plug made from?
The K650LB deadbreak insulating plug is constructed from epoxy.
What are the dimensions of the K650LB insulating plug?
The K650LB insulating plug has a length of 3.939 inches and a widest diameter of 3 inches.
Does the K650LB insulating plug come with installation accessories?
Yes, the K650LB insulating plug includes silicone lubricant and instructions.
What series is the K650LB deadbreak insulating plug part of?
The K650LB deadbreak insulating plug is part of the 600 Series.
How to Install the LINK-C Deadbreak Cam Link Operable Connector System
This guide provides step-by-step instructions for installing the 600 amp LINK-C Deadbreak Cam Link Operable Connector System, designed for fully shielded, submersible hot stick operable connections and 200 amp taps for 15kV and 25kV systems.
Estimated time: 1h 30m
Tools needed:
Hot stick, 600ATM Operating Tool, Torque wrench, Socket wrench (with 1 inch hex socket), Wire strippers, Welding equipment (if studs are not pre-existing)
Supplies needed:
ELASTIMOLD supplied lubricant, 3/8-16 x 2 inch studs (if welding), 3/8-16 Hex nuts, Lockwashers, #14 AWG or #12 AWG solid copper wire, Grounding connectors, Spacers (optional)
- Prepare for Installation and Install 600 Amp Elbow
DANGER: Ensure all apparatus is de-energized during installation or removal of parts to prevent serious or fatal injury. Install the 600 amp elbow onto the cable according to its specific installation instructions, ensuring it will align correctly with the stand-off plug.
- Mount the Stand-Off Plug (If Applicable)
Weld three 3/8-16 x 2” studs to the equipment faceplate according to specified dimensions. Install three hex nuts onto the studs to support the stand-off plug, or use spacers. Position the stand-off plug over the studs, resting it on the nuts or spacers. Secure the stand-off plug by installing a lockwasher and hex nut on each stud, then tighten to 12 ft-lbs torque. Verify that the top surfaces of the apparatus bushing and stand-off plug are in-line, adjusting nuts as needed.
- Install Bushing Extender and Elbow
Clean and thoroughly lubricate the apparatus bushing and both interfaces of the 600 amp bushing extender with ELASTIMOLD lubricant. Install the bushing extender onto the apparatus bushing. Insert the 600ATM into the retainer contact, engage the internal hex broach, and thread the retainer contact into the apparatus bushing using a 1” hex tool, torquing to 50-60 ft-lbs. Similarly, clean and lubricate the epoxy stand-off plug and both interfaces of the 600 amp elbow. Install the elbow onto the epoxy stand-off plug, insert the 600AMT into its retainer contact, and thread it into the stand-off plug, torquing to 50-60 ft-lbs.
- Install Alignment Bracket
Remove the bushing extender clamp and elbow clamp from the alignment bracket. Position the alignment bracket on the bushing extender 2.5 inches (63.5mm) from the grounding eye. Assemble the bushing extender clamp to the alignment bracket with the supplied hardware, torquing by alternating sides until the clamp tabs are flush and tight. Align the elbow cuff evenly with the bushing extender cuff within the bracket. Assemble the elbow clamp to the alignment bracket, torquing by alternating sides until the clamp tabs are flush and tight, ensuring the elbow clamp notch faces the cable entrance.
- Install the Link Connector
Clean and thoroughly lubricate both 600 amp interfaces of the Link with ELASTIMOLD lubricant. Align the Link to be perpendicular to the switch faceplate when inserted. Insert the Link into the bushing extender and elbow, ensuring both lever arms are inside the alignment bracket legs. Engage the pivot pin into the slots of the alignment bracket legs. Using a hot stick, push inward and move the lever arms downward to engage the roller pin, moving the Link inward until the lever arms are perpendicular to the alignment bracket leg.
- Ground the System
Ground the elbow by feeding a #14 AWG or #12 AWG solid copper wire through its grounding eye, twisting it tight, and connecting it to ground. Clean and lubricate the 200 amp interface on the Link, then ground and install any desired mating product according to its instructions. Ground the cable by twisting concentric neutral wires together and connecting to ground, or by connecting the ground lead from 20MA/21MA grounding devices to ground. For three-phase installations, tie all grounds from all three phases to a common ground point.
Frequently Asked Questions about ABB - Installation Products
How are Thomas and Betts products typically installed?
Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.
What accessories are available for Thomas and Betts products?
Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.
What environmental ratings do Thomas and Betts products have?
Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.
What communication protocols do Thomas and Betts products support?
Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.
What are the key features of Thomas and Betts products?
Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.
What are the main product lines offered by Thomas and Betts?
Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.
What technical support does Thomas and Betts offer?
Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.
What industries and applications are Thomas and Betts products used for?
Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.
What certifications and standards do Thomas and Betts products comply with?
Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.
What are the main product lines offered by Ocal?
Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.