200 Amp, 15kV, Insulated Cap with Ground, without Probe, Equipped with Insulated Cuff.

200 Amp, 15kV, Brackets and hardware only for 164FT (Feed-Thru). Kit Includes Universal Bracket, Bottom Shield Plate, Flat-Head Machine Screws and Instruction Sheet.

15/25kV 200 Amp, Deadbreak Cable Entrance Insulating Plug, Cable Insulation Diameter 0.610 inch to 0.735 inch.

15/25kV, 600 Amp Bushing Extender and Stud with Elbow Tap Plug. Bushing Extender is 8.41 inch long x 3.17 inch Diameter. Stud is 2.28 inch long x 5/8-11 UNC-2A Threads on both ends.

15kV, 600/200 Amp Stick Op Loadbreak Bushing Adapter includes Insulating Cap with 38 inch Black Ground Wire.

15/25kV 200 Amp, Deadbreak Cable Entrance Insulating Plug, Cable Insulation Diameter 0.825 inch to 0.935 inch.

Bushing Converter. Mates with Bushing Interfaces that conform to ANSI Standard 386. Total Length 14.97 inches, Diameter 3.2 inch. EPDM Rubber.

600 Amp, 15 KV, Stick Op Bushing Adapter, includes Insulating Cap with 72 inch Long Green Ground Cable.

Copper Ground Braid, Length 24 inch with 2 inch Sealing Area / Solder Blocks, For 600ECSG3

15/25kv, 600 Amp, 8-9/16 inch Long Shank Bushing, Suffix SP for Permanent Stud, Entire Length 13.75 inches, Diameter 4.50 inches.

25kv, 900 Amp, Deadbreak, Reducing Tap Well with Loose Stud. Length 5.37 inch not counting Stud. Width 3 inch not counting bracket.

600 Amp, Separable Cable Joint, 35KV, Basic Housing Package, Wye Joint with Test Point, 200 KV BIL (basic insulation level)