The duplex fiber patch cord is OS2 with a 1.6mm cable jacket. It is Low Smoke Zero Halogen (LSZH), features LC Duplex to LC Duplex connectors, has standard insertion loss and is 1.5 meters in length

The Mini-Com Duplex LC Adapter is a small form factor (SFF) adapter with integrated panel retention clips and are TIA/EIA-605 FOCIS-10 compatible. It couples two LC duplex connectors in one module space and features a fiber adapter that is Keyed L-Light Brown on the user side and Non-keyed on the service side along with a black module and has zirconia split sleeves.

The 5-10 KVA, VRLA, UPS Extended Warranty allows you to extended the factory standard warranty by upto an additional (3) years. Sold in (1) year increments.

The duplex fiber patch cord is OS2 with a 1.6mm cable jacket. It is Low Smoke Zero Halogen (LSZH), features LC Duplex to LC Duplex connectors, has standard insertion loss and is 9.5 meters in length

The Mini-Com Duplex LC Adapter is a small form factor (SFF) adapter with integrated panel retention clips and are TIA/EIA-605 FOCIS-10 compatible. It couples two LC duplex connectors in one module space and features a red fiber adapter along with an international white module and has zirconia split sleeves.

OM4, 12 Fiber Interconnect, Low Smoke Zero Halogen, PanMPO Female to PanMPO Female, Method B, Optimized Insertion Loss - 2 Meters

This 6-13mm (1/4"-1/2") cable gland is to be used to secure incoming fiber cable to HD Fusion Wall Mount enclosures (Panduit part numbers FWMHSS*S-3456 and FWMHSS*S-6912, sold separately). Circular cutouts in the top, bottom and side cover plates are designed to fit this cable gland. This cable gland requires a cutout diameter of 22.5mm (7/8"). This cable gland is black in color.

The HD Flex Fiber Panel is 2 RU and accepts up to twenty-four 6 port HD Flex cassettes or Fiber Adapter Panels for a maximum density of 288 fibers.

Wall Mount Fiber Splice Enclosure, 6912 Ribbon Fibers

This HD Fusion Wall Mount Incoming Cable Anchor Post is used along with the HD Fusion Wall Mount enclosures (Panduit part numbers FWMHSS*S-3456 and FWMHSS*S-6912, sold separately). The incoming cable anchor post can be installed can be attached to the Incoming Cable Plate (Panduit part number FWMHSS-ICP, sold separately) to strain relief the cable central strength member. All necessary hardware is included for this part. This Incoming Cable Anchor Post is stainless steel.

Couple two sections of 6"x4" FiberRunner Routing System channel (sold separately) together with the FRESPKT6 FiberRunner Expansion Splice Kit - 6"x4". Couplers can be installed anywhere in system with the exception of where Lower Trough Support Brackets (part number FDFLMBKT6, sold separately) are located. This coupler kit contains one 6x4 FiberRunner Lower Trough Inner Coupler, one 6x4 FiberRunner Lower Trough Outer Coupler, two 1/4-20 hex nuts and one #8-32 screw.

The QuickNet SFQ MPO Fiber Adapter Panel Type A features 6 MPO key-up/key-down adapters. It snaps quickly into the rear of QuickNet Patch Panels for easy network deployment and quick migration. It is red and comes with installed dust caps.