
CompleTech CA930B2 bidirectional broadside - Frequency range: 880-960 MHz - Gain: 6 dBi - Polarization…
Documents & Media
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- Bidirectional broadside antenna for 880-960 MHz
- 6 dBi gain with vertical polarization
- Durable UV-resistant ABS/FG radome with PU foam
- N-female connector and VSWR <1.5
- IP67 rated with DC short lightning protection
Specifications
Connector | N-female |
Frequency | 880-960 MHz |
Gain | 6 dBi |
Length | 255 mm |
Mounting Diameter | Ø 35-60 |
Polarization | vertical |
Radiator Material | copper |
Radome | ABS/FG, PU foam |
VSWR | <1.5 |
Weight | 1455 g |
Wind Load | 50 N @ 150 km/h |

CA85B2
bidirectional broadside - Frequency range: 83-88 MHz - Gain: 6 dBi - Polarization: vertical - Connector: N-/TNC-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 168 N
CA170C2
offset pattern collinear - Frequency range: 163-177 MHz - Gain: 8 dBi - Polarization: vertical - Connector: N-/TNC-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 110 N
CA140B2
bidirectional broadside - Frequency range: 135-145 MHz - Gain: 6 dBi - Polarization: vertical - Connector: N-/TNC-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 126 N
CA160C2
offset pattern collinear - Frequency range: 154-166 MHz - Gain: 8 dBi - Polarization: vertical - Connector: N-/TNC-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 114 N
CA860B4
bidirectional stacked broadside - Frequency range: 830-890 MHz - Gain: 9 dBi - Polarization: vertical - Connector: N-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 100 N
CA160B2
bidirectional broadside - Frequency range: 154-166 MHz - Gain: 6 dBi - Polarization: vertical - Connector: N-/TNC-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 114 NFrequently Asked Questions
What is the operating temperature range for this antenna?
The antenna can operate in temperatures ranging from -40ºC to +80ºC.
What type of connectors does the antenna use?
The antenna is equipped with both N-female and TNC-female connectors.
What is the impedance of the antenna?
The impedance of the antenna is 50 ohm.
What is the gain of the antenna?
The antenna provides a gain of 6 dBi.
What is the VSWR rating for this antenna?
The VSWR rating for the antenna is less than 1.5.
What materials are used for the antenna's radome and radiator?
The radome is made of UV resistant ABS/FG with PU foam filling, and the radiator is made of copper.
How is the antenna attached, and what are the dimensions?
It uses an aluminium alloy bracket with stainless steel V-bolts and nuts for attachment, suitable for diameters of 35-60 mm.
Does the antenna have lightning protection?
Yes, the antenna features DC-short circuited lightning protection.
What is the IP rating of the antenna?
The antenna has an IP rating of 67, indicating it is dust-tight and protected against water immersion.
What are the frequency ranges supported by this antenna?
The antenna supports multiple frequency ranges including 83-88 MHz, 135-145 MHz, 144-159 MHz, 154-166 MHz, 163-177 MHz, 221-239 MHz, 326-353 MHz, 336-364 MHz, 365-395 MHz, 380-410 MHz, 405-440 MHz, 440-475 MHz, 830-890 MHz, and 880-960 MHz.
How to Install the CA930B2 Controller
This guide provides step-by-step instructions for installing and configuring the CA930B2 Controller, ensuring proper wiring and calibration.
Estimated time: 1h
Tools needed:
Screwdriver, Wire strippers, Multimeter
Supplies needed:
Mounting screws, Self-amalgamating tape, Terminal connectors
- Mount the controller
Secure the CA930B2 Controller to the designated mounting surface using the provided mounting screws. Ensure it is level and securely fastened.
- Connect the wiring
Strip the ends of the wires and connect them to the appropriate terminals on the CA930B2 Controller. Use terminal connectors to ensure a secure connection.
- Seal the connections
Cover all connectors and cable junctions with self-amalgamating tape to provide weather protection and prevent moisture ingress.
- Verify connections
Use a multimeter to check the continuity of the connections. Ensure that all connections are secure and functioning correctly.
- Calibrate the controller
Follow the manufacturer's instructions to calibrate the CA930B2 Controller. Adjust settings as necessary for optimal performance.

