
CompleTech CA160C2 offset pattern collinear - Frequency range: 154-166 MHz - Gain: 8 dBi - Polarization…
Documents & Media
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- Frequency Range: 154-166 MHz
- Gain: 8 dBi
- Polarization: Vertical
- Connector: N-female / TNC-female
- VSWR: <1.5
- Radome: UV resistant ABS/FG with PU foam filling
- Radiator Material: Copper
- Mounting: Ø 35-60 mm pole
- IP Rating: 67
- Temperature Range: -40ºC to +80ºC
Specifications
Connector | N-/TNC-female |
Frequency | 154-166 MHz |
Gain | 8 dBi |
Length | 2780 mm |
Mounting Diameter | Ø 35-60 |
Polarization | vertical |
Radiator Material | copper |
Radome | FG, PU foam |
VSWR | <1.5 |
Weight | 2110 g |
Wind Load | 114 N @ 150 km/h |

CA930C2
offset pattern collinear - Frequency range: 880-960 MHz - Gain: 8 dBi - Polarization: vertical - Connector: N-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 50 N
CA860B4
bidirectional stacked broadside - Frequency range: 830-890 MHz - Gain: 9 dBi - Polarization: vertical - Connector: N-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 100 N
CA160B2
bidirectional broadside - Frequency range: 154-166 MHz - Gain: 6 dBi - Polarization: vertical - Connector: N-/TNC-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 114 N
CA140S2+
directional stacked yagi array - Frequency range: 135-145 MHz - Gain: 11 dBi - Polarization: vertical/horizontal - Connector: N-/TNC-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 342 N
CA230C3
offset pattern collinear - Frequency range: 221-239 MHz - Gain: 10 dBi - Polarization: vertical - Connector: N-/TNC-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 135 N
CA150Y
directional yagi - Frequency range: 144-156 MHz - Gain: 6 dBi - Polarization: vertical/horizontal - Connector: N-/ TNC-/ 7/16-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 80 NFrequently Asked Questions
What is the operating temperature range for the CA160C2 antenna?
The antenna can operate in temperatures ranging from -40ºC to +80ºC.
What is the impedance of the CA160C2 antenna?
The impedance of the CA160C2 antenna is 50 ohm.
What is the gain of the CA160C2 antenna?
The CA160C2 antenna has a gain of 8 dBi.
What type of connector does the CA160C2 antenna use?
The CA160C2 antenna uses N-female or TNC-female connectors.
What is the VSWR rating for the CA160C2 antenna?
The VSWR for the CA160C2 antenna is less than 1.5.
What is the IP rating of the CA160C2 antenna?
The CA160C2 antenna has an IP rating of 67.
How is lightning protection provided for the CA160C2 antenna?
The CA160C2 antenna is DC-short circuited for lightning protection.
What polarization does the CA160C2 antenna support?
The CA160C2 antenna supports vertical polarization.
What is the radome material for the CA160C2 antenna?
The radome is made of UV resistant ABS/FG with PU foam filling.
What materials are used for the CA160C2 antenna's attachment bracket?
The attachment bracket is made of aluminium alloy with stainless steel V-bolts and nuts.
How to Install the CA160C2 Controller
This guide provides step-by-step instructions for installing and configuring the CA160C2 Controller, ensuring proper wiring and calibration.
Estimated time: 45m
Tools needed:
Screwdriver, Wire strippers, Multimeter
Supplies needed:
Mounting screws, Wire connectors, Self-amalgamating tape
- Mount the controller
Secure the CA160C2 controller to the designated mounting surface using the provided mounting screws. Ensure it is level and firmly attached.
- Connect the wiring
Use wire connectors to attach the necessary power and signal wires to the controller terminals. Ensure all connections are tight and secure.
- Seal the connections
Cover all connectors and cable junctions with self-amalgamating tape to protect against weather and moisture.
- Verify the installation
Use a multimeter to check the voltage at the controller terminals to ensure proper power supply. Confirm that all connections are functioning as intended.
- Calibrate the controller
Follow the manufacturer's instructions to enter the calibration mode and adjust the settings as required for your specific application.

