
CompleTech CA170C2 offset pattern collinear - Frequency range: 163-177 MHz - Gain: 8 dBi - Polarization…
Documents & Media
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- Frequency Range: 163-177 MHz
- Gain: 8 dBi
- Polarization: Vertical
- Connector: N-/TNC-female
- IP67 Rated Construction
Specifications
Connection Type | N-/TNC-female |
Connector | N-/TNC-female |
Frequency | 163-177 MHz |
Gain | 8 dBi |
Length | 2625 mm |
Material | ABS/FG PU foam, copper |
Mounting Diameter | Ø 35-60 |
Mounting Type | 35-60 mm diameter pole |
Polarization | vertical |
Radiator Material | copper |
Radome | FG, PU foam |
Series | CA170C2 |
VSWR | <1.5 |
Weight | 2095 g |
Wind Load | 110 N @ 150 km/h |

CA450C2
offset pattern collinear - Frequency range: 440-475 MHz - Gain: 8 dBi - Polarization: vertical - Connector: N-/TNC-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 64 N
CA140B2
bidirectional broadside - Frequency range: 135-145 MHz - Gain: 6 dBi - Polarization: vertical - Connector: N-/TNC-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 126 N
CA160C2
offset pattern collinear - Frequency range: 154-166 MHz - Gain: 8 dBi - Polarization: vertical - Connector: N-/TNC-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 114 N
CA860B4
bidirectional stacked broadside - Frequency range: 830-890 MHz - Gain: 9 dBi - Polarization: vertical - Connector: N-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 100 N
CA160B2
bidirectional broadside - Frequency range: 154-166 MHz - Gain: 6 dBi - Polarization: vertical - Connector: N-/TNC-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 114 N
CA140S2+
directional stacked yagi array - Frequency range: 135-145 MHz - Gain: 11 dBi - Polarization: vertical/horizontal - Connector: N-/TNC-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 342 NFrequently Asked Questions
What is the operating temperature range for this antenna?
The antenna can operate in temperatures ranging from -40ºC to +80ºC.
What is the impedance of the ComAnt CA170C2 antenna?
The impedance of the antenna is 50 ohm.
What is the gain of the CA170C2 antenna?
The antenna has a gain of 8 dBi.
What is the VSWR rating for this antenna?
The VSWR rating for the antenna is less than 1.5.
What type of connector does the CA170C2 antenna use?
The antenna features N-female or TNC-female connectors.
Is the antenna protected against lightning strikes?
Yes, the antenna is DC-short circuited for lightning protection.
What is the IP rating of the antenna?
The antenna has an IP rating of 67, indicating it is dust-tight and protected against water immersion.
What materials are used for the antenna's radome and radiator?
The radome is made of UV resistant ABS/FG with PU foam filling, and the radiator is made of copper.
How to Install the CA170C2 Controller
This guide provides step-by-step instructions for installing and configuring the CA170C2 Controller, ensuring proper wiring and calibration.
Estimated time: 45m
Tools needed:
Screwdriver, Wire strippers, Multimeter
Supplies needed:
Mounting screws, Terminal connectors, Self-amalgamating tape
- Mount the controller
Secure the CA170C2 controller to the designated mounting surface using the provided mounting screws. Ensure it is level and firmly attached.
- Connect the wiring
Use wire strippers to prepare the ends of the wires. Connect the power and signal wires to the appropriate terminals on the CA170C2 controller, ensuring a secure fit.
- Seal the connections
Cover all connectors and cable junctions with self-amalgamating tape to provide weather protection and prevent moisture ingress.
- Verify the connections
Use a multimeter to check the voltage at the controller terminals to ensure proper power supply before powering on the device.
- Calibrate the controller
Follow the manufacturer's instructions to perform the initial calibration of the CA170C2 controller, ensuring it operates within specified parameters.

