
Contact for Pricing
Overview
- Frequency Range: 83-88 MHz
- Gain: 6 dBi
- Polarization: Vertical
- Connector: N-female / TNC-female
- Radome: UV resistant ABS/FG with PU foam filling
- IP Rating: 67
- Temperature Range: -40ºC - +80ºC
- Mounting: Ø 35-60 mm pole diameter
Specifications
Connection Type | N-/TNC-female |
Connector | N-/TNC-female |
Frequency | 83-88 MHz |
Gain | 6 dBi |
Length | 1235 mm |
Material | ABS/FG PU foam, copper |
Mounting Diameter | Ø 35-60 |
Mounting Type | 35-60 mm diameter pole |
Polarization | vertical |
Radiator Material | copper |
Radome | FG, PU foam |
Series | CA85B2 |
VSWR | <1.5 |
Weight | 2920 g |
Wind Load | 168 N @ 150 km/h |

CA420B2
bidirectional broadside - Frequency range: 405-440 MHz - Gain: 6 dBi - Polarization: vertical - Connector: N-/TNC-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 66 NHow to Install the CA85B2 Controller
This guide provides step-by-step instructions for installing and configuring the CA85B2 Controller, ensuring proper wiring and calibration.
Estimated time: 45m
Tools needed:
Screwdriver, Wire strippers, Multimeter
Supplies needed:
Mounting screws, Self-amalgamating tape, Terminal connectors
- Mount the controller
Secure the CA85B2 controller to the designated mounting surface using the provided mounting screws. Ensure it is level and firmly attached.
- Connect the wiring
Strip the ends of the wires and connect them to the appropriate terminals on the CA85B2 controller. Use terminal connectors to ensure a secure connection.
- Seal the connections
Cover all connectors and cable junctions with self-amalgamating tape to protect against weather conditions. Ensure that the tape is applied evenly and securely.
- Verify the installation
Use a multimeter to check the voltage at the controller terminals to ensure proper power supply. Confirm that all connections are secure.
- Calibrate the controller
Follow the manufacturer's instructions to configure the settings on the CA85B2 controller. Adjust parameters as necessary for optimal performance.

