
Contact for Pricing
Overview
- Bidirectional stacked broadside antenna for 336-364 MHz
- 9 dBi gain and vertical polarization for efficient signal transmission
- Durable UV-resistant ABS/FG radome with PU foam filling
- N-female / TNC-female connector and VSWR < 1.5
- IP67 rated for dust and water resistance, suitable for harsh environments
Specifications
Connector | N-/TNC-female |
Frequency | 336-364 MHz |
Gain | 9 dBi |
Length | 1280 mm |
Mounting Diameter | Ø 35-60 |
Polarization | vertical |
Radiator Material | copper |
Radome | ABS/FG, PU foam |
VSWR | <1.5 |
Weight | 3670 g |
Wind Load | 144 N @ 150 km/h |

CA85B4
bidirectional stacked broadside - Frequency range: 83-88 MHz - Gain: 9 dBi - Polarization: vertical - Connector: N-/TNC-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 336 NHow to Install the CA350B4 Controller
This guide provides step-by-step instructions for installing and configuring the CA350B4 Controller, ensuring proper wiring and calibration.
Estimated time: 45m
Tools needed:
Screwdriver, Wire strippers, Multimeter
Supplies needed:
Mounting screws, Terminal connectors, Self-amalgamating tape
- Mount the controller
Secure the CA350B4 controller to the designated mounting surface using the provided mounting screws. Ensure it is level and firmly attached.
- Connect the wiring
Strip the ends of the wires and connect them to the appropriate terminals on the CA350B4 controller. Use terminal connectors to ensure a secure connection.
- Seal connections
Cover all connectors and cable junctions with self-amalgamating tape to provide proper weather protection and prevent moisture ingress.
- Verify connections
Use a multimeter to check the continuity of the connections. Ensure that all connections are secure and functioning correctly.
- Calibrate the controller
Follow the manufacturer's guidelines to calibrate the CA350B4 controller. Adjust settings as necessary for optimal performance.

