
CompleTech CA340C4 offset pattern collinear - Frequency range: 326-353 MHz - Gain: 11 dBi - Polarization…
Documents & Media
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- Frequency range: 326-353 MHz with 11 dBi gain for strong signal transmission
- Vertical polarization with field-adjustable radiation pattern and optional beam tilting
- UV-resistant ABS/FG radome with PU foam filling for IP67 protection
- N-/TNC-female connector with low VSWR (<1.5) for minimal signal reflection
- Mounts on 35-60 mm diameter poles with 144 N wind load resistance
Specifications
Connector | N-/TNC-female |
Frequency | 326-353 MHz |
Gain | 11 dBi |
Length | 3085 mm |
Mounting Diameter | Ø 35-60 |
Polarization | vertical |
Radiator Material | copper |
Radome | ABS/FG, PU foam |
VSWR | <1.5 |
Weight | 3670 g |
Wind Load | 144 N @ 150 km/h |

CA860C4
offset pattern collinear - Frequency range: 830-890 MHz - Gain: 11 dBi - Polarization: vertical - Connector: N-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 100 N
CA350B2
bidirectional broadside - Frequency range: 336-364 MHz - Gain: 6 dBi - Polarization: vertical - Connector: N-/TNC-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 72 N
CA380D
offset pattern dipole - Frequency range: 365-395 MHz - Gain: 5 dBi - Polarization: vertical/horizontal - Connector: N-/ TNC-/ 7/16-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 35 N
CA350D
offset pattern dipole - Frequency range: 336-364 MHz - Gain: 5 dBi - Polarization: vertical/horizontal - Connector: N-/ TNC-/ 7/16-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 36 N
CA350Y++
directional yagi - Frequency range: 336-364 MHz - Gain: 10 dBi - Polarization: vertical/horizontal - Connector: N-/ TNC-/ 7/16-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 108 N
CA340Y+
directional yagi - Frequency range: 326-353 MHz - Gain: 8 dBi - Polarization: vertical/horizontal - Connector: N-/ TNC-/ 7/16-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 79 NFrequently Asked Questions
What is the operating temperature range for the CA340C4 antenna?
The CA340C4 antenna can operate in temperatures ranging from -40 extdegree C to +80 extdegree C.
What is the impedance of the CA340C4 antenna?
The impedance of the CA340C4 antenna is 50 ohm.
What is the gain of the CA340C4 antenna?
The CA340C4 antenna has a gain of 11 dBi.
What is the VSWR rating for the CA340C4 antenna?
The VSWR for the CA340C4 antenna is less than 1.5.
What type of connector does the CA340C4 antenna use?
The CA340C4 antenna is equipped with an N-female/TNC-female connector.
What is the IP rating of the CA340C4 antenna?
The CA340C4 antenna has an IP rating of 67.
How is the CA340C4 antenna protected against lightning?
The CA340C4 antenna is protected against lightning by being DC-short circuited.
What materials are used for the radome and radiator of the CA340C4 antenna?
The radome is made of UV resistant ABS/FG with PU foam filling, and the radiator is made of copper.
What are the dimensions for mounting the CA340C4 antenna?
The attachment bracket for the CA340C4 antenna accommodates diameters of 35-60 mm.
What is the polarization of the CA340C4 antenna?
The CA340C4 antenna supports vertical polarization.
How to Install the CA340C4 Controller
This guide provides step-by-step instructions for installing and configuring the CA340C4 Controller, ensuring proper setup and connection.
Estimated time: 45m
Tools needed:
Screwdriver, Wire strippers, Multimeter
Supplies needed:
Mounting screws, Self-amalgamating tape, Terminal connectors
- Mount the controller
Secure the CA340C4 Controller to the designated mounting location using the provided mounting screws. Ensure it is level and firmly attached.
- Connect the wiring
Strip the ends of the wires and connect them to the appropriate terminals on the CA340C4 Controller. Use terminal connectors to ensure a secure connection.
- Seal connections
Cover all connectors and cable junctions with self-amalgamating tape to provide weather protection and prevent moisture ingress.
- Verify connections
Use a multimeter to check the continuity of the connections. Ensure that all connections are secure and functioning properly.
- Configure the controller
Follow the manufacturer's instructions to program the CA340C4 Controller settings according to your application requirements.
- Calibrate the system
Perform any necessary calibration procedures as outlined in the user manual to ensure accurate operation of the CA340C4 Controller.

