
Contact for Pricing
Overview
- Bidirectional broadside antenna for 326-353 MHz frequency range
- 6 dBi gain with vertical polarization for optimal signal performance
- Durable construction with UV-resistant ABS/FG radome and copper radiator
- IP67 rated for robust environmental protection
- N-/TNC-female connectors and 35-60 mm pole mounting compatibility
Specifications
Connector | N-/TNC-female |
Frequency | 326-353 MHz |
Gain | 6 dBi |
Length | 485 mm |
Mounting Diameter | Ø 35-60 |
Polarization | vertical |
Radiator Material | copper |
Radome | ABS/FG, PU foam |
VSWR | <1.5 |
Weight | 1690 g |
Wind Load | 72 N @ 150 km/h |

CA930B2
bidirectional broadside - Frequency range: 880-960 MHz - Gain: 6 dBi - Polarization: vertical - Connector: N-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 50 NHow to Install the CA340B2 Controller
This guide provides step-by-step instructions for installing and configuring the CA340B2 Controller for optimal performance.
Estimated time: 45m
Tools needed:
Screwdriver, Wire strippers, Multimeter
Supplies needed:
Mounting screws, Self-amalgamating tape, Terminal connectors
- Mount the controller
Secure the CA340B2 controller to the designated mounting surface using the provided mounting screws. Ensure it is level and firmly attached.
- Connect the wiring
Use wire strippers to prepare the ends of the wires. Connect the wires to the appropriate terminals on the CA340B2 controller, ensuring correct polarity.
- Seal the connections
Cover all connectors and cable junctions with self-amalgamating tape to ensure proper weather protection and prevent moisture ingress.
- Verify the installation
Use a multimeter to check the voltage at the terminals to ensure proper power supply to the controller. Confirm that all connections are secure.
- Configure the controller
Follow the manufacturer's instructions to program the CA340B2 controller settings according to your specific application requirements.

