
CompleTech CA150D offset pattern dipole - Frequency range: 144-156 MHz - Gain: 5 dBi - Polarization…
Documents & Media
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- Frequency Range: 144-156 MHz
- Gain: 5 dBi
- Polarization: Vertical/Horizontal
- Connector Options: N-, TNC-, 7/16-female
- VSWR: <1.5
- Radome: UV resistant ABS/FG with PU foam
- Radiator Material: Copper
- Mounting: 35-60 mm diameter pole
- IP67 Rated Construction
- DC-short circuited for lightning protection
Specifications
Connector | N-/TNC-/7/16-female |
Frequency | 144-156 MHz |
Gain | 5 dBi |
Length | 540 mm |
Mounting Diameter | Ø 35-60 |
Polarization | vertical/horizontal |
Radiator Material | copper |
Radome | FG, PU foam |
VSWR | <1.5 |
Weight | 900 g |
Wind Load | 60 N @ 150 km/h |

CA420D
offset pattern dipole - Frequency range: 405-440 MHz - Gain: 5 dBi - Polarization: vertical/horizontal - Connector: N-/ TNC-/ 7/16-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 33 N
CA170D
offset pattern dipole - Frequency range: 163-177 MHz - Gain: 5 dBi - Polarization: vertical/horizontal - Connector: N-/ TNC-/ 7/16-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 55 N
CA930B2
bidirectional broadside - Frequency range: 880-960 MHz - Gain: 6 dBi - Polarization: vertical - Connector: N-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 50 N
CA170C2
offset pattern collinear - Frequency range: 163-177 MHz - Gain: 8 dBi - Polarization: vertical - Connector: N-/TNC-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 110 N
CA140B2
bidirectional broadside - Frequency range: 135-145 MHz - Gain: 6 dBi - Polarization: vertical - Connector: N-/TNC-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 126 N
CA160C2
offset pattern collinear - Frequency range: 154-166 MHz - Gain: 8 dBi - Polarization: vertical - Connector: N-/TNC-female - VSWR: <1.5 - Radome: ABS/FG PU foam - Radiator material: copper - Mounting: 35-60 mm diameter pole - Wind load: 114 NFrequently Asked Questions
What is the operating temperature range for the CA150D antenna?
The CA150D antenna can operate in temperatures ranging from -40ºC to +80ºC.
What is the impedance of the CA150D antenna?
The impedance of the CA150D antenna is 50 ohm.
What is the VSWR rating for the CA150D antenna?
The VSWR for the CA150D antenna is less than 1.5.
What is the gain of the CA150D antenna?
The CA150D antenna has a gain of 5 dBi.
What is the IP rating of the CA150D antenna?
The CA150D antenna has an IP rating of 67.
How is the CA150D antenna protected against lightning?
The CA150D antenna features DC-short circuited lightning protection.
What type of connectors are available for the CA150D antenna?
The CA150D antenna is available with N-, TNC-, or 7/16-female connectors.
What materials are used for the CA150D antenna's radome and radiator?
The radome is made of UV resistant ABS/FG with PU foam filling, and the radiator is made of copper.
What is the beamwidth of the CA150D antenna in the E-plane?
The E-plane -3 dB beamwidth for the CA150D antenna is 74º.
What is the beamwidth of the CA150D antenna in the H-plane?
The H-plane -3 dB beamwidth for the CA150D antenna is 179º.
How to Install the CA150D Controller
This guide provides step-by-step instructions for installing and configuring the CA150D Controller, ensuring proper setup and calibration.
Estimated time: 1h
Tools needed:
Screwdriver, Wire strippers, Multimeter
Supplies needed:
Mounting screws, Wire connectors, Self-amalgamating tape
- Mount the controller
Secure the CA150D Controller to the designated mounting surface using the provided mounting screws. Ensure it is level and firmly attached.
- Connect the wiring
Use wire connectors to connect the power supply and signal wires to the appropriate terminals on the CA150D Controller. Refer to the wiring diagram for correct terminal assignments.
- Seal connections
Cover all connectors and cable junctions with self-amalgamating tape to ensure proper weather protection and prevent moisture ingress.
- Power on the controller
Turn on the power supply to the CA150D Controller and verify that the power indicator LED lights up, indicating that the unit is receiving power.
- Configure the settings
Access the configuration menu on the CA150D Controller using the interface. Set the desired parameters according to your application requirements.
- Calibrate the controller
Follow the calibration procedure outlined in the user manual to ensure the CA150D Controller operates accurately. Use a multimeter to verify output signals.

