UPC: 783786760084
Documents & Media
Contact for Pricing
Minimum Qty: 25
Multiplier: 25
*Contact for lower quantities*
Overview
- Supports #14 to #4 AWG copper and #14 to #2 AWG aluminum conductors
- 600V-rated for reliable outdoor electrical connections
- Includes Y-Type Insert & Housing, Load End Insert, Twin Cap, and Insulating Twin Rocket
- Fuse clip accommodates midget-type fuses (1 1/2 × 13/32 inches) for overcurrent protection
- Silicone grease and oxide inhibitor prevent corrosion and enhance conductivity
Specifications
Color | Black |
Conductor Range | #14 to #4 CU AWG , #14 to #2 AL AWG |
Connection | Mechanical |
Insulation | True |
Type | Fused Disconnect Streetlight Kit |
Package Dimensions (L x W x H) | 0.01 IN x 0.01 IN x 0.01 IN |
Package Dimensions (L x W x H) | 0.0254 cm x 0.0254 cm x 0.0254 cm |
Package Weight (Imperial) | 0.4700 L |
Package Weight (Metric) | 0.2130 kg |
YDU
Flood Seal, YY Type NonFused Disconnect StreetLight Kit, #14-#4 Copper, #14-#2 Aluminum, includes Insulating Twin Cap and Twin Rocket, Fuse Clip, Copper Wire 10 Gauge, (3) Screws, Silicone Grease, Oxide Inhibitor, Instruction Sheet
URS 125-17 1/2
Aluminum Flood-Seal Mechanical Splice Compression Type Repair Kit, conductor range #2 to 350 kcmil, standard one-hole lugs, connector length 3-15/64 inch. Kit includes (2) Connectors, (2) Caps, (2) Screws, (2) Rockets and 20-1/2 inches of 350 kcmil Aluminum Wire.UF 6055-4
Mechanical Connector with 4 Outlets Placed inside Plastic Splice Housing, 1-11/32 inch long x 55/64 inch x 55/64 inch.
262LR-A5230
25kV, 200 Amp, Loadbreak Elbow, with Test Point, Cable Insulation Diameter .575-.740 inches, Bi-Medal Lug, Conductor Size #1 AWG Stranded Compressed or 1/0 AWG Compact/Solid. No Sealing Kit. 9 inch x 8.2 inch (not counting Probe).
K656SR-N0410
600 Amp, 15/25kV, 600 Series Straight Receptacle with cable adapter, lug and retaining ring. Cable Insulation Diameter 1.515 inch to 1.780 inch. Aluminum Compression Lug. Conductor Size kcmil Compressed Stranded 1000.
262LRJS-D5230
25kV 200 Amp, Loadbreak Jacket Seal Elbow Connector with Test Point, .890 inch - 1.220 Inch Cable Insulation Diameter, #1 Stranded - Compressed or 1/0 Compact - Solid Wire Size, Bi-Metal Compression Lug.
K656CETP-H0240-DRG
25kV, 600 Amp, Combo T Elbow Reducing Tap Plug with Test Point, includes Stud, Cable Adapter, Lug and Insulated Cap Kit, Cable Insulation Diameter .850-1.050 inches (21.6-26.7 mm), Universal Aluminum Connector Type, Connector Size 1/0 Stranded/Compressed or 2/0 Solid/Compact. With Insulating Cap.How to Install Flood-Seal YY-Type Disconnect Kits (YFU and YDU)
This guide provides step-by-step instructions for the safe installation and wiring of Flood-Seal YY-Type Disconnect Kits, including both Load End and Line Side assemblies. Ensure all local, state, and national electrical codes are followed.
Estimated time: 45m
Tools needed:
1/8 inch hex wrench, Wire strippers, Screwdriver
Supplies needed:
Y-Type Insert & Housing (Line Side), Connecting Link (for Disconnect Kits), Load End Insert with Connector, Load End Twin Cap, Silicone grease, Midget type fuse (1 1/2 x 13/32, if required, not included), Electrical cables (#14-6 CU or AL, #14-4 CU, #14-2 AL, #8-4, #4-1/0)
- Safety Warning and Cable Identification
WARNING: Danger of Electric Shock! Installation must be performed by trained installers in accordance with all applicable local, state, and national electrical codes, installation standards, and safety rules. CAUTION: Identify load side wire and assemble per instructions.
- Prepare Load End Housing and Cable
Select the correct cut-off ring on the Load end housing for the cable being used. Cut off the end of the housing at the tip of the arrow, leaving the correct cable size showing. Wipe the cable clean. On larger cables, bevel the end of the cable insulation for ease of installation. Apply silicone grease to the end of the cable and to the cut opening of the load end housing. Insert cables until they extend 2 to 3 inches beyond the housing.
- Strip and Connect Load End Wires
Strip insulation from the cable ends, baring 1/2 inch of conductor. CAUTION: Do not exceed strip length. Insert wires into the connector of the insert. Tighten screws to hold wires securely.
- Install Fuse/Link and Seat Load End Insert
Insert the fuse or connecting link (if applicable) into the YY Load Side assembly. Apply silicone grease as shown, then pull on the wires and/or push the insert until it is properly seated in the twin cap housing.
- Prepare Line Side Housing and Cable (for Run Connections)
Select the correct cut-off ring for the cable being used. Cut and pencil the cable insulation. Apply silicone grease to the end of the cable and to the cut opening of the housing. Slide the cable through until it extends 2 to 3 inches beyond the housing.
- Strip and Connect Line Side Wires
Bare 1/2 inch of insulation. CAUTION: Do not overstrip. Insert cables as shown in the illustration. Tighten to a minimum of 30 inch-lbs using a 1/8 inch hex wrench.
- Assemble and Seat Line Side Insert
Lubricate the insert with silicone grease. Slide the Y-Type housing up to the bottom of the insert. Push the insert into the opening of the housing. While pulling on the cables and holding onto the housing, slide it toward the insert. Push the insert until it is fully seated in the housing.
- Final Lubrication of Components
Lubricate male and female components with the supplied silicone grease to ensure a proper seal and ease of connection.
Frequently Asked Questions about ABB - Installation Products
How are Thomas and Betts products typically installed?
Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.
What accessories are available for Thomas and Betts products?
Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.
What environmental ratings do Thomas and Betts products have?
Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.
What communication protocols do Thomas and Betts products support?
Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.
What are the key features of Thomas and Betts products?
Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.
What are the main product lines offered by Thomas and Betts?
Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.
What technical support does Thomas and Betts offer?
Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.
What industries and applications are Thomas and Betts products used for?
Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.
What certifications and standards do Thomas and Betts products comply with?
Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.
What are the main product lines offered by Ocal?
Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.