
ABB Installation Products USK 500 Aluminum Flood-Seal Mechanical Splice Two-Wire Kits, conductor range 2-500 connector…
UPC: 783786755660
Documents & Media
Contact for Pricing
Minimum Qty: 20
Multiplier: 20
*Contact for lower quantities*
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- Aluminum construction for excellent conductivity and corrosion resistance
- Flood-Seal design for enhanced environmental protection
- Mechanical splice for secure and reliable two-wire connections
- Accommodates conductor range of 2-500 AWG
- Connector length of 4 3/16 inches with 2 screws per side
Specifications
Application | Repair Splice |
Conductor Range | #2 to 500 kcmil |
Connection | Mechanical |
Insulation | True |
Material | Aluminum Connector, EPDM Cover |
Number of Conductors | 2 |
Size | 4-1/4 inch connector |
Special Features | Prefilled with Oxide Inhibitor to prevent Oxidation and keep out Moisture. Dual-Rated and approved for use with Aluminum and Copper Conductors. EPDM Rubber Splice Covers ensure a fully insulated, watertight repair splice. No Taping, Heat-Shrink or Mastic needed |
Type | Mechanical Splice |
Package Dimensions (L x W x H) | 0.01 IN x 0.01 IN x 0.01 IN |
Package Dimensions (L x W x H) | 0.0254 cm x 0.0254 cm x 0.0254 cm |
Package Weight (Imperial) | 1.0400 L |
Package Weight (Metric) | 0.4720 kg |

USK 500-12
Aluminum Flood-Seal Mechanical Splice Two-Wire Kits, conductor range 2-500 connector length 12 inch, screws per side 2
USK 4/0 SL
Aluminum Flood-Seal Mechanical Splice Three-Wire Kits, conductor range side A 6-350, side B 1/0-4/0 with 6-14 solid tap, outlets accommodate 3 Wires
USK 4/0
Aluminum Flood-Seal Mechanical Splice Two-Wire Kits, conductor range 4-4/0 connector length 2in, screws per side 1
USK 350-18
Aluminum Flood-Seal Mechanical Splice Two-Wire Kits, conductor range 6-350 connector length 18 inch, screws per side 1
SLK 1010 M
Flood-Seal Street and Highway Lighting Mechanical Fuse and Disconnect Kits, In-Line Variable-Range, fused, conductor range stranded 1/0-2, and solid 1/0-2
USK 350-4
Aluminum Flood-Seal Mechanical Splice Two-Wire Kits, conductor range 6-350 connector length 4 inch, screws per side 1
SLK-M
Flood-Seal Street and Highway Lighting Mechanical Fuse and Disconnect Kits-In-Line, fused, conductor range stranded 12,10,8,6,4 and solid 12,10,8,6,4Frequently Asked Questions
What material is the ABB USK 500 splice kit made from?
The ABB USK 500 splice kit is constructed from aluminum.
What is the length of the USK 500 connector?
The connector length for the ABB USK 500 Mechanical Splice Kit is 4 3/16 inches.
How many screws are included per side on the USK 500 splice?
The ABB USK 500 Mechanical Splice Kit features two screws per side for secure termination.
What type of connection does the USK 500 kit provide?
The ABB USK 500 kit provides a mechanical splice connection for two-wire configurations.
What is the conductor range for the USK 500 splice kit?
The ABB USK 500 Mechanical Splice Kit is designed for conductor ranges from 2 AWG to 500 AWG.
How to Install the USK 500 Flood-Seal Mechanical Splice Kit
This guide provides step-by-step instructions for installing the USK 500 Flood-Seal Mechanical Splice Kit, designed for direct-buried cable splicing with an EPDM cover.
Estimated time: 45m
Tools needed:
5/16 inch hex wrench, Cable strippers, Utility knife
Supplies needed:
USK 500 Flood-Seal Mechanical Splice Kit, Silicone grease, Electrical cables (to be spliced)
- Review Safety Warnings
Before beginning, review all safety warnings. Installation must be performed by trained installers in accordance with all applicable local, state, and national electrical codes, installation standards, and safety rules to prevent danger of electric shock.
- Select Correct Cut-off Ring
Select the correct cut-off ring from the kit that matches the diameter of the cable being used.
- Prepare First Cable End
Wipe the first cable clean. Strip approximately 2-1/4 inches of insulation from the cable end for connector installation. Bevel the end of the cable insulation to facilitate easier installation of the splice cover.
- Prepare Rocket Half of Splice Cover
Apply silicone grease to the end of the prepared first cable and to the cut opening of the 'rocket' (one half of the splice cover). Slide the rocket over the prepared cable end.
- Trim Rocket Half
Cut off the rocket at the tip of the arrow, ensuring the correct cable size marking remains visible on the opened rocket.
- Install Mechanical Connector on First Cable
Install the mechanical connector onto the exposed conductor of the first cable. Using a 5/16 inch hex wrench, torque the connector to the suggested values: 240 in-lbs (20 ft-lbs) for 2/0 - 350 Kcmil, or 360 in-lbs (30 ft-lbs) for 400 - 500 Kcmil. For UL applications, torque to 270 in-lbs.
- Prepare Second Cable End and Cap Half
Repeat the preparation steps for the second cable end: wipe it clean, strip approximately 2-1/4 inches of insulation, and bevel the insulation end. Apply silicone grease to this cable end and to the cut opening of the 'cap' (the other half of the splice cover). Slide the cap over the prepared second cable end and trim it as done for the rocket.
- Connect Second Cable to Splice
Connect the exposed conductor of the second cable to the other side of the mechanical splice connector, torquing it to the specified values using the 5/16 inch hex wrench.
- Assemble Splice Cover
Apply silicone grease to the open edge of the rocket and the cap where they will meet. Center the mechanical connector between the rocket and the cap, then slide the two covers together firmly to create a 'Flood-Seal'.
Frequently Asked Questions about ABB - Installation Products
How are Thomas and Betts products typically installed?
Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.
What accessories are available for Thomas and Betts products?
Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.
What environmental ratings do Thomas and Betts products have?
Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.
What communication protocols do Thomas and Betts products support?
Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.
What are the key features of Thomas and Betts products?
Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.
What are the main product lines offered by Thomas and Betts?
Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.
What technical support does Thomas and Betts offer?
Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.
What industries and applications are Thomas and Betts products used for?
Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.
What certifications and standards do Thomas and Betts products comply with?
Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.
What are the main product lines offered by Ocal?
Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.
