
ABB Installation Products RAB 10 C Multi Seal, Aluminum Insulated Bus Connector, #12 - 350 kcmil, Ten Conductor, Dual Rated…
UPC: 783786744848
Documents & Media
Contact for Pricing
Minimum Qty: 150
Multiplier: 150
*Contact for lower quantities*
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- Ten-conductor design for multi-service connections in secondary underground distribution
- Accommodates #12 AWG solid to 350 kcmil aluminum or copper conductors
- High-strength 6061-T6 aluminum alloy bar with tin-plated screws for corrosion resistance
- High-performance TPE insulation rated for -40°F to 194°F (-40°C to 90°C)
- 100% hi-pot tested at 4000V for 60 seconds for safety and reliability
Specifications
Application | Dual-Rated Connector |
Color | Black |
Conductor Range | #12 to 350 kcmil |
Connection | Mechanical |
Connection Type | Multi Seal Bus Connector |
Connection Type | Screw Terminal |
Environmental Conditions | Waterproof |
Insulation | yes |
Material | 6061-T6 Aluminum Connector, Santoprene Body |
Material | Aluminum Insulated |
Material | Aluminum |
Number Of Conductors | 10 |
Number of Poles | 10 |
Poles | 10 |
Series | RAB |
Size | Length 11-15/16 inches |
Size | #12 - 350 kcmil |
Special Features | High Performance, Dual Rated Connectors |
Standard | RUS Accepted |
Type | Aluminum Flood-Seal Multi-Port Connector RAB 350 Series |
Package Dimensions (L x W x H) | 0.01 IN x 0.01 IN x 0.01 IN |
Package Dimensions (L x W x H) | 0.0254 cm x 0.0254 cm x 0.0254 cm |
Package Weight (Imperial) | 2.4100 L |
Package Weight (Metric) | 1.0930 kg |

RAB 6 TS
Multi Seal, Aluminum Insulated Bus Connector, #12 - 350 kcmil, Aluminum and Copper, Six Conductor. EZ Torque shear head screws supplied in all outlets
RAB 6 C
Aluminum Multi-Port Connectors - RAB 350 Series, conductor range 12 sol-350, length 7-1/8 inch, Oxide Inhibitor. Cap is attached by Strap.
RAB 7 C
Multi Seal, Aluminum Insulated Bus Connector, #12 - 350 kcmil, Seven Conductor, Dual Rated Aluminum and Copper, 10 pieces. Cap is attached by Strap.
RAB 8 C
Multi Seal, Aluminum Insulated Bus Connector, #12 - 350 kcmil, Eight Conductor, Dual Rated Aluminum and Copper, 10 pieces. Cap is attached by Strap.
RAB 9 C
Multi Seal, Aluminum Insulated Bus Connector, #12 - 350 kcmil, Nine Conductor, Dual Rated Aluminum and Copper, 10 pieces. Cap is attached by Strap.
RXL 4 C-OP
Aluminum Flood-Seal Multi-Port Santoprene Insulated Bus Connector - RXL 350 Series, Cable Range #12-350 kcmil, Four Conductor, Dual Rated Aluminum and Copper, 5.8 X 4.0 X 2.63 inch, outlets 4, Orange Plug, Oxide Inhibitor.
RXL 5 C-OP
Aluminum Flood-Seal Multi-Port Santoprene Insulated Bus Connector - RXL 350 Series, Cable Range #2 - 1000 kcmil, Five Conductor, Dual Rated Aluminum and Copper, 7.3 X 4.0 X 2.63 inch, outlets 5, Orange Plugs, Oxide Inhibitor. Includes Cable Adapters, Plugs, Caps, Screws.
SHC 3 S
SweetHeart FloodSeal Aluminum Mechanical Connectors with Streetlight option, dual rated, Black PVC insulated, cable range feeder outlet / StreetLight #6-350 kcmil, outlets 3, length 5-1/8 inch, Comes with Tin Plated Screws and Flood Seal EPDM Rubber Rockets, but has Flood Seal Streetlight Santoprene Rocket (longer body, shorter nose) for Center Tower only. Grooved Wire Ports.Frequently Asked Questions
Are these connectors tested for safety?
Yes, they are 100% hi-pot tested at 4000 V for 60 seconds to ensure safety and performance.
How many outlets does the RAB 10 C connector have?
The RAB 10 C connector is designed with 10 outlets.
What is the length of the RAB 10 C connector?
The RAB 10 C connector has a length of 11.94 inches (303 mm).
Can cables be reinstalled or resealed after removal?
Yes, the connectors are re-enterable and resealable. No new rocket is required if the reinstalled cable is the same size or larger.
What are the primary applications for these connectors?
They are typically used in 600 volt underground residential distribution (URD) systems for direct burial, below-grade boxes, above-grade pedestals, and street light taps.
What materials are used in the connector's construction?
They are made from high-strength, high-conductivity 6061-T6 aluminum alloy with tin-plated screws and high-performance TPE compound insulation.
What cable sizes are compatible with these connectors?
The connectors are compatible with #12 AWG solid through 350 kcmil cables, for both copper or aluminum conductors.
What is the operating temperature range?
These connectors can operate in a temperature range from -40 °F to 194 °F (-40 °C to 90 °C).
What is the voltage rating for these connectors?
The Homac RAB 350 series connectors have a voltage rating of 600 V.
What is the operating temperature range?
These connectors can operate in a temperature range from -40 °F to 194 °F (-40 °C to 90 °C).
How to Install RAB 350 Series Connectors
This guide provides step-by-step instructions for safely installing tap conductors using RAB 350 series connectors, including preparing the rocket, stripping the cable, and torquing the connection to specification.
Estimated time: 30m
Tools needed:
Wire strippers, Torque wrench, Insulating gloves
Supplies needed:
RAB 350 Series Connector, Tap conductors
- Observe Safety Precautions
WARNING: Danger of Electric Shock! Ensure installation is performed by trained personnel in accordance with all applicable electrical codes and safety rules. Always wear insulating gloves rated to the appropriate voltage when working on live conductors. Ensure tap conductors are NOT under load if installing on an energized main. Make sure all unused cable ports are sealed.
- Prepare the rocket (if applicable)
For 300/350 kcmil cable, remove the internal rocket from the connector as it is not required. For #12 to 250 kcmil cable, the rocket is needed; proceed to the next step.
- Cut the rocket to size
If installing #12 to 250 kcmil cable, cut the rocket at the marked ring to the appropriate length for your specific cable size.
- Reinsert the rocket
If the rocket was removed or cut, reinsert it into the connector if required for your cable size (i.e., for #12 to 250 kcmil).
- Strip the cable
Place the cable alongside the markings on the connector's tower to measure the correct strip length. Then, carefully strip the cable to the measured length using wire strippers.
- Insert the conductor
Insert the stripped cable conductor into the appropriate opening (the tower for 300-350 kcmil or the rocket for #12-250 kcmil) until the end of the conductor is visible and touches the window.
- Remove the screw plug
Locate the screw plug on the connector and remove it by pulling its attached tether.
- Torque the connection
Using a torque wrench, tighten the connector to the specified values: 120 in-lb for #12 to #3 AWG, and 240-350 in-lb for #2 to 350 kcmil. Refer to the tether for exact values and acceptable torque range.
- Replace the screw plug
Once the connector is torqued to the correct specification, replace the screw plug securely into its opening.
- Reseal the connector
Ensure all unused cable ports are sealed. Reseal the connector by installing any attached plugs to maintain environmental integrity and prevent ingress.
Frequently Asked Questions about ABB - Installation Products
How are Thomas and Betts products typically installed?
Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.
What accessories are available for Thomas and Betts products?
Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.
What environmental ratings do Thomas and Betts products have?
Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.
What communication protocols do Thomas and Betts products support?
Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.
What are the key features of Thomas and Betts products?
Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.
What are the main product lines offered by Thomas and Betts?
Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.
What technical support does Thomas and Betts offer?
Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.
What industries and applications are Thomas and Betts products used for?
Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.
What certifications and standards do Thomas and Betts products comply with?
Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.
What are the main product lines offered by Ocal?
Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.