ABB Installation Products R2T28M4-N0410 Ranger2 Termination. Type - Outdoor, 28kV, Cable Type - Tape Shield/Wire Shield/…
UPC: 783786553075
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- Outdoor-rated for environmental resilience
- 28kV operating voltage capability
- Accommodates insulation range of 1.30" - 2.10"
- Aluminum 2-hole spade connector for #2-1250 kcmil conductors
- Compatible with tape shield, wire shield, and unshielded cables
Specifications
Application | Cable Termination, Outdoor Application, 28kV |
Cable Type | Copper Tape Shielded Wire |
Color | Gray |
Conductor Size | 1000 kcmil |
Earthing | Products Includes Their Own Grounding System |
Mounting | Product Need to have Cable Holder (not included) |
Number Of Terminals | (1) Single Phase |
Special Features | Silicone Rubber Housing. Lightweight, Compact Design. Pull-Down Tabs for Easy Installation. Thick Wall Construction |
Standard | IEEE 48 |
Type | Cable Termination - Outdoor - Ranger2 |
Voltage Rating | 28 kV |
Package Dimensions (L x W x H) | 0.01 IN x 0.01 IN x 0.01 IN |
Package Dimensions (L x W x H) | 0.0254 cm x 0.0254 cm x 0.0254 cm |
Package Weight (Imperial) | 1.0000 L |
Package Weight (Metric) | 0.4540 kg |
R2T28J4-N0410-B4
Ranger2 Termination. Type - Outdoor, 28kV, Cable Type - Concentric Neutral/Jacketed Concentric Neutral, Insulation Range - 1.30 inch - 2.10 inch, Connector Type - Aluminum 2-Hole Spade #2-1250 kcmil, Conductor Code - 410 -Stranded or Compressed 1000 Compact or Solid N/A. Cable Mounting Bracket - B4 - Stainless Steel - Size 1.80 inch - 2.40inch.R2T28M4-T0220-B2
Ranger2 Termination for 25/28KV outdoor application, cable insulation diameter 1.30 - 2.10 inches for Tape Shield, Wire Shield, and Unshielded Cable, includes Universal Aluminum Barrel For Aluminum or Copper Conductor with copper wire lead #2-4/0, Stranded or Compressed #2 /Compact or Solid #1, Stainless Steel Mounting Bracket 1.10 inch - 1.50 inch
R2T35J2-N0270
Ranger2 Termination. Type - Outdoor, 35kV, Cable Type - Concentric Neutral/Jacketed Concentric Neutral, Insulation Range - .84 inch - 1.38 inch, Connector Type - Aluminum 2-Hole Spade #2-1250 kcmil, Conductor Code - 270 -Stranded or Compressed 4/0 Compact or Solid 250.R2T28J4-T0260
Ranger2 Termination for 25/28KV outdoor application, cable insulation diameter 1.30 - 2.10 inches for Concentric Neutral/Jacketed Concentric Neutral Cable, includes Universal Aluminum Barrel For Aluminum or Copper Conductor with copper wire lead #2-4/0, Stranded or Compressed 3/0 /Compact or Solid 4/0
R2T15J1-N0240
Ranger2 Termination for 15KV outdoor application, cable insulation diameter .64 - 1.12 inches for Concentric Neural and Jacketed Concentric Neutral Cable, includes Aluminum 2-Hole Spade connector for #2 to 1250 kcmil. 1/0 Stranded or 2/0 Solid
R2T28M2-N0210
Ranger2 Termination for 28KV indoor application, cable insulation diameter .84 - 1.38 inches for Cable Type - Tape Shield, Wire Shield, and Unshielded Cable, Aluminum 2-Hole Spade #2-1250kcmil, Conductor Code 210 - Compact or Solid #2.R2T35J2-T0250
Ranger2 Termination for 35KV outdoor application, cable insulation diameter .84 - 1.38 inches for Concentric Neural and Jacketed Concentric Neutral Cable, includes Universal Aluminum Barrel For Aluminum or Copper Conductor with copper wire lead, Stranded or Compressed 2/0 /Compact or Solid 3/0R2T15J1-T0250-B1
Outdoor, Ranger2 Termination, 15kV, Concentric Neutral/Jacketed Concentric Neutral Cable Type, Insulation Range - .64-1.12 inch (16-28mm). Connector Type Universal Aluminum Barrel for AL or CU Conductor with Copper Wire Lead #2-4/0. Conductor - 2/0 Stranded/Compressed or 3/0 Compact/Solid. Cable Mounting Bracket Material - Stainless Steel, Size .80-1.25 inch (20-32mm).Frequently Asked Questions
What is the maximum voltage rating for this ABB Ranger2 termination?
The ABB Ranger2 termination is rated for 28kV, making it suitable for medium-voltage applications.
What cable insulation sizes can the R2T28M4-N0410 accommodate?
This termination is designed to fit cables with an insulation range of 1.30 inches to 2.10 inches.
What type of connector is included with the Ranger2 termination?
The Ranger2 termination includes an aluminum 2-hole spade connector.
What conductor sizes are compatible with the aluminum spade connector?
The aluminum 2-hole spade connector is compatible with conductor sizes from #2 AWG to 1250 kcmil.
What cable shield types can this termination be used with?
This termination is suitable for tape shield, wire shield, and unshielded cable types.
How to Install the R2T28M4 Ranger 2 Silicone Rubber Termination
This guide provides step-by-step instructions for installing the R2T28M4 Ranger 2 Shrink-fit Silicone Rubber Termination on tape-shielded high voltage cables, covering cable preparation, ground braid installation, lug connection, and termination application. Ensure all apparatus are de-energized before starting.
Estimated time: 1h 30m
Tools needed:
Cable preparation tools (e.g., wire strippers, utility knife), Crimping tool (for lugs/connectors), Measuring tape or ruler, Abrasive (aluminum oxide, 120 grit or finer, if needed)
Supplies needed:
R2T28M4-N0410 Silicone Rubber Termination kit, Vinyl electrical tape, Compatible cable connector/lug, Approved solvent
- Prepare Cable for Termination
De-energize all apparatus. Verify cable size fits the termination kit. Train the cable into position and cut to the required length. Prepare the cable according to the specified dimensions, allowing for terminal lug depth and aluminum lug growth. Secure the tape shield edge with the supplied copper foil tape to prevent unrolling.
- Install Ground Braid and Mastic Seal
Wrap one band of mastic 1/4 inch (6mm) from the cable jacket end, using 50% stretch, and cut flush. Position the preformed ground braid with the short tail over the tape shield and the solder block centered over the mastic strip. Secure the ground braid to the cable jacket with vinyl tape and press the solder block into the mastic. Apply a second mastic band over the solder block, maintaining the 1/4 inch (6mm) dimension, and cut flush. Wrap two half-lapped layers of vinyl tape over the mastic seal. Wrap the ground braid around the cable tape shield once, trim excess, and secure it with the constant force spring, wrapping in the same direction. Cinch the spring and secure it with two wraps of vinyl tape.
- Attach Terminal Lug or Connector
Before crimping, ensure the termination assembly fits over the selected lug. If it does not, slide the termination onto the cable first (do not remove the core). Position the connector or lug and crimp it according to the manufacturer's instructions, leaving the last 3/8 to 1/2 inch uncrimped. Remove any excess oxide inhibitor and all sharp crimp flashings or edges after crimping.
- Clean Cable Insulation and Lug
Wipe the cable insulation with an approved solvent, being careful not to let the solvent touch the semi-conductive insulation shield. If abrasive cleaning is necessary, use only aluminum oxide abrasive (120 grit or finer) on the insulation, avoiding the semi-conductive shield. Do not reduce the cable insulation diameter below the kit's allowed range.
- Install the Termination Body and Moisture Seal
Create a track-resistant moisture seal between the termination insulator and the lug/connector using the gray silicone rubber electrical tape. Wrap a band around the base of the terminal lug; use up to 2 layers if the barrel diameter is equal to or greater than the cable primary insulation, or build up to the insulation diameter if smaller. Apply a liberal coating of silicone grease to the edge of the semi-conductive insulation shield to fill the step. Pull the loose end of the removable core through the top of the termination until it is flush with the bottom. Slide the termination body onto the cable, aligning it with the forward edge of the mastic seal. Carefully remove the core by unwinding it counter-clockwise, ensuring the termination body (not the core) is butted against the mastic seal. Do not push or pull the termination assembly during core removal.
- Complete Sealing and Ground Connection
Apply a thin film of silicone lubricant to the skirt and mastic seal area, avoiding the skirt tabs. Carefully fold down the skirt over the mastic seal. Complete the lug area moisture seal using the remaining gray silicone rubber electrical tape, overlapping the termination insulator by approximately 1 inch and extending over a non-crimped region of the lug/connector barrel with a half-lap configuration. Connect the ground braid to the system ground. Finally, confirm that the High-K step does not exceed 1.5 inches.
Frequently Asked Questions about ABB - Installation Products
How are Thomas and Betts products typically installed?
Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.
What accessories are available for Thomas and Betts products?
Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.
What environmental ratings do Thomas and Betts products have?
Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.
What communication protocols do Thomas and Betts products support?
Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.
What are the key features of Thomas and Betts products?
Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.
What are the main product lines offered by Thomas and Betts?
Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.
What technical support does Thomas and Betts offer?
Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.
What industries and applications are Thomas and Betts products used for?
Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.
What certifications and standards do Thomas and Betts products comply with?
Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.
What are the main product lines offered by Ocal?
Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.