
ABB Installation Products R2T15M4-N0410-B3 15 kv, Cable Terminator Ranger2, Outdoor, Cable Type - Tape Shield/Wire…
UPC: 075114319829
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- 15 kV outdoor cable terminator for tape/wire shielded and UniShield cables
- Accommodates insulation diameters from 1.30" to 2.10" (33 mm to 53 mm)
- N0 aluminum 2-hole spade connector rated for #2 AWG to 1250 kcmil conductors
- B3 stainless steel mounting bracket for cables 1.45" to 1.95" O.D. (37 mm to 50 mm)
- Shrink-fit housing with pull-down jacket seal for easy installation and long-term reliability
Specifications
Application | Cable Termination, Outdoor Application, 15kV |
Cable Type | Copper Tape Shielded Wire |
Color | Gray |
Conductor Size | 1000 kcmil |
Connection Type | 2-Hole Spade |
Earthing | Products Includes Their Own Grounding System |
Material | Aluminum, Stainless Steel |
Mounting | Product Need to have Cable Holder (not included) |
Mounting Type | Bracket Mount |
Number Of Terminals | (1) Single Phase |
Series | Ranger2 |
Size | Insulation Range 1.30 inch to 2.10 inch (33 mm to 53 mm), Cable Mounting Bracket Size 1.45 inch to 1.95 inch (37mm - 50mm) |
Special Features | Silicone Rubber Housing. Lightweight, Compact Design. Pull-Down Tabs for Easy Installation. Thick Wall Construction |
Standard | IEEE 48 |
Type | Cable Termination - Outdoor - Ranger2 |
Voltage Rating | 15 kV |
Package Dimensions (L x W x H) | 0.01 IN x 0.01 IN x 0.01 IN |
Package Dimensions (L x W x H) | 0.0254 cm x 0.0254 cm x 0.0254 cm |
Package Weight (Imperial) | 1.0000 L |
Package Weight (Metric) | 0.4540 kg |

R2T15L4-N0410
Ranger2 Termination for 15KV outdoor application, cable insulation diameter 1.30 - 2.10 inches for LC Shield Tape Shield/Wire Over Tape Shield. includes Aluminum 2-Hole Spade connector for #2-1250 kcmil, Stranded or Compressed 1000.
R2T28J4-N0380-B4
25/28kV, Ranger2 Cable Termination. Outdoor. Cable Type - Concentric Neutral/Jacketed Concentric Neutral. Insulation Range 1.30-2.10 inch. Connector Type Aluminum 2 Hole Spade #2-1250kcmil. Conductor Size 750kcmil Stranded/compressed 900kcmil Solid/Compact. Stainless Steel Cable Mounting Bracket 1.80-2.40 inches
R2T15J2-N0270-B2
Outdoor, Ranger2 Termination, 15kV, Cable Type Concentric Neutral/Jacketed Concentric Neutral, Insulation Range .84 to 1.38 inch (21-35mm). Connector Type Aluminum 2-Hole Spade #2-1250 kcmil. Conductor Code 270 - 4/0 Stranded/Compressed or 250 Solid/Compact. Cable Mounting Bracket 1.10-1.50 inch (28-38mm), Plated Mild Steel.
R2T15J4-N2410-B3
15kV, Outdoor, Ranger2 Termination with Mounting Bracket, Cable Type - Concentric Neutral/Jacketed Concentric Neutral, Insulation Range - 1.30-2.10 inch (33-53mm), Connector Type N2 - Copper 2-Hoel Spade #2-1250 kcmil. Conductor Code 410 - 1000 kcmil Stranded/Compressed. Cable Mounting Bracket Material - B3 - Stainless Steel - 1.45-1.95 inch (37-50mm).
R2T15M1H0270
15kV, Ranger2 Cable Termination. Outdoor. Cable Type - Tape Shield/Wire Sheild/Unisheild. Insulation Range .64-1.12 inch. Connector Type Aluminum 1 Hole Spade #2-500kcmil. Conductor Size 4/0 Stranded/compressed 250kcmil Solid/Compact.
R2T15M1T0220
Ranger2 Termination. Type - Outdoor, 15kV, Cable Type - Tape Shield/Wire Shield/ Unshield, Insulation Range - .64 inch - 1.12 inch, Connector Type - Universal Aluminum Barrel for AL or CU Condutor with Copper Wire Lead #2-4/0, Conductor Code - 220 -Stranded/Compressed #2 or Compact/Solid #1.
R2T28J4-N0270-B3
Ranger2 Termination for 25/28KV outdoor application, cable insulation diameter 1.30 - 2.10 inches for Concentric Neural and Jacketed Concentric Neutral Cable, includes Aluminum 2-Hole Spade connector for #2-1250 kcmil, Stranded/Compressed 4/0 or Compact/Solid 250, Stainless Steel Mounting Bracket 1.45 inch - 1.95 inch
R2IT15J4-N2300
15kV, Ranger2 Cable Termination, Indoor, Cable Type - Concentric Neutral/Jacketed Concentric Neutral, Insulation Range - 1.30-2.10 inch (33-53mm), Connector Type - N2 - Copper 2-Hole spade #2-1250 kcmil, Conductor Code 300 - 350 Strandeed/Compressed or 400 Compact/Solid.Frequently Asked Questions
What cable insulation sizes does this terminator support?
The terminator supports cable insulation diameters ranging from 1.30 inch to 2.10 inch (33 mm to 53 mm).
What conductor size is compatible with this terminator?
The terminator is designed for compressed 1000 kcmil conductors.
What is the connector type for this terminator?
The connector type is a 2-hole spade #2 rated for up to 1250 kcmil.
What is the material of the mounting bracket?
The mounting bracket is made of stainless steel.
What is the voltage rating of this terminator?
The terminator has a 15 kV voltage rating for medium-voltage applications.
What cable shield types are supported?
The terminator supports tape shield, wire shield, or UniShield cables.
What is the size range for the cable mounting bracket?
The stainless steel mounting bracket accommodates cable sizes from 1.45 inch to 1.95 inch (37 mm to 50 mm).
How to Install the 15kV & 28kV Ranger 2 Silicone Rubber Termination
This guide provides step-by-step instructions for installing the 15kV & 28kV Ranger 2 Shrink Fit Silicone Rubber Termination on tape shielded cables, covering preparation, ground braid, lug connection, and termination application.
Estimated time: 1h 30m
Tools needed:
Crimping tool, Wire strippers, Approved solvent, Aluminum oxide abrasive (120 grit or finer, optional), Vinyl tape, Scissors or utility knife
Supplies needed:
15kV & 28kV Ranger 2 Shrink Fit Silicone Rubber Termination kit, Silicone Lubricant, Gray Silicone Rubber Electrical Tape, Constant Force Spring, Preformed Ground Braid, Sealing Mastic, Copper Foil Tape, Gloves, Connector or Lug (user-supplied), Semi-conductive rubber tape (e.g., Scotch No. 13, for special cases)
- Ensure Safety and Inspect Components
DANGER: De-energize all apparatus in the work area before beginning installation. Inspect all kit contents and the cable for any damage, and confirm proper rating and compatibility. Read all installation instructions completely before starting the procedure.
- Prepare the Cable
Verify the cable size fits within the kit's specified insulation range. Train and cut the cable to the required length. Prepare the cable jacket, semi-con, and insulation to the dimensions specified in the instructions, allowing for terminal lug depth and aluminum lug growth. Secure the tape shield edge with a single wrap of the supplied copper foil tape to prevent unrolling.
- Install the Ground Braid Assembly
Wrap one band of mastic (50% stretch) 1/4 inch (6mm) from the cable jacket end; cut it flush without overlap. Position the preformed ground braid with the solder block centered over the mastic and secure it to the cable jacket with vinyl tape, pressing the solder block into the mastic. Apply a second mastic band over the solder block and previous mastic, maintaining the 1/4 inch (6mm) dimension; cut flush. Wrap two half-lapped layers of vinyl tape over the mastic seal. Wrap the ground braid around the cable tape shield, trim any excess, and secure it in place with the constant force spring. Cinch the spring after the final winding and secure it with two wraps of vinyl tape.
- Install and Crimp the Lug or Connector
Check to ensure the termination assembly will fit over the selected lug. If the lug will not fit, clean the insulation and slide the termination onto the cable before installing the lug (do not remove the core at this time). Position the connector or lug and crimp it according to the manufacturer's directions, ensuring not to crimp the last 3/8 inch to 1/2 inch of the connector. Remove any excess oxide inhibitor and all sharp crimp flashings or edges after crimping.
- Clean Cable Insulation and Lug Barrel
Wipe the cable insulation with an approved solvent, taking care not to allow the solvent to touch the semi-con insulation shield. If abrasive cleaning is necessary, use only aluminum oxide abrasive (grit 120 or finer) on the insulation only; do not use it on the semi-con insulation shield or reduce the cable insulation diameter below the kit's allowance.
- Install the Silicone Rubber Termination Body
Create a track-resistant moisture seal between the termination insulator and the lug/connector by wrapping gray silicone rubber electrical tape around the base of the terminal lug. Adjust the number of layers based on the barrel diameter relative to the cable primary insulation. Cover the edge of the semi-con insulation shield with a liberal coating of silicone grease to fill the step at the semi-con cut-off. Pull the loose end of the removable core through the top of the termination until the core is flush with the bottom. Slide the termination body onto the cable, aligning it with the forward edge of the mastic seal. Carefully remove the core by unwinding counter-clockwise, starting with the loose end. Ensure the termination body, not the core, remains butted against the leading edge of the mastic seal. Continue core removal without pushing or pulling the termination assembly.
- Complete Moisture Seal and Ground Connection
Apply a thin film of silicone lubricant to the skirt and mastic seal area, avoiding the skirt tabs. Carefully fold down the skirt over the mastic seal. Complete the lug area moisture seal using the remaining gray silicone rubber electrical tape, overlapping the termination insulator by approximately 1 inch and extending the tape wrapping over a non-crimped region of the lug/connector barrel with a half-lap configuration. Connect the ground braid to the system ground. Finally, confirm that the High-K step does not exceed 1.5 inches.
Frequently Asked Questions about ABB - Installation Products
How are Thomas and Betts products typically installed?
Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.
What accessories are available for Thomas and Betts products?
Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.
What environmental ratings do Thomas and Betts products have?
Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.
What communication protocols do Thomas and Betts products support?
Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.
What are the key features of Thomas and Betts products?
Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.
What are the main product lines offered by Thomas and Betts?
Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.
What technical support does Thomas and Betts offer?
Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.
What industries and applications are Thomas and Betts products used for?
Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.
What certifications and standards do Thomas and Betts products comply with?
Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.
What are the main product lines offered by Ocal?
Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.