ABB Installation Products R2T15M1T0220 Ranger2 Termination. Type - Outdoor, 15kV, Cable Type - Tape Shield/Wire Shield/…
UPC: 075114348096
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- 15kV outdoor-rated termination for medium-voltage applications
- Supports insulation range: 0.64" to 1.12" (16 mm to 28 mm)
- Universal aluminum barrel for AL or CU conductors (#2-4/0)
- Non-tracking silicone housing with superior weathering and creepage
- Field-removable center core and pull-down jacket seal for easy installation
Specifications
Application | Cable Termination, Outdoor Application, 15kV |
Cable Type | Copper Tape Shielded Wire |
Color | Gray |
Conductor Size | #2 STR AWG , #2 COMPR AWG , #1 SOL AWG , #1 COMPT AWG |
Earthing | Products Includes Their Own Grounding System |
Mounting | Product Need to have Cable Holder (not included) |
Number Of Terminals | (1) Single Phase |
Special Features | Silicone Rubber Housing. Lightweight, Compact Design. Pull-Down Tabs for Easy Installation. Thick Wall Construction |
Standard | IEEE 48 |
Type | Cable Termination - Outdoor - Ranger2 |
Voltage Rating | 15 kV |
Package Dimensions (L x W x H) | 0.01 IN x 0.01 IN x 0.01 IN |
Package Dimensions (L x W x H) | 0.0254 cm x 0.0254 cm x 0.0254 cm |
Package Weight (Imperial) | 1.0000 L |
Package Weight (Metric) | 0.4540 kg |
PCT10220-5
15kV, Single Piece Terminator (Class 1), One-Hole Spade Lug. Power Cable Termination, Conductor Size - #2 Stranded/Compressed or #1 Compact/Solid, Use for Insulation Diameter Range from .640 to 1.070 inches.
R2T28J4-N0270-B3
Ranger2 Termination for 25/28KV outdoor application, cable insulation diameter 1.30 - 2.10 inches for Concentric Neural and Jacketed Concentric Neutral Cable, includes Aluminum 2-Hole Spade connector for #2-1250 kcmil, Stranded/Compressed 4/0 or Compact/Solid 250, Stainless Steel Mounting Bracket 1.45 inch - 1.95 inch
R2IT15J4-N2300
15kV, Ranger2 Cable Termination, Indoor, Cable Type - Concentric Neutral/Jacketed Concentric Neutral, Insulation Range - 1.30-2.10 inch (33-53mm), Connector Type - N2 - Copper 2-Hole spade #2-1250 kcmil, Conductor Code 300 - 350 Strandeed/Compressed or 400 Compact/Solid.R2IT15M1-N0250
Ranger2 Termination. Type - Indoor, 15kV, Cable Type - Tape Shield/Wire Shield/ Unshield, Insulation Range - .64 inch - 1.12 inch, Connector Type - Aluminum 2-Hole Spade #2-1250 kcmil, Conductor Code - 250 -Stranded/Compressed 2/0 or Compact/Solid 3/0.R2IT15M1-N0270
Ranger2 Termination. Type - Indoor, 15kV, Cable Type - Tape Shield/Wire Shield/ Unshield, Insulation Range - .64 inch - 1.12 inch, Connector Type - Aluminum 2-Hole Spade #2-1250 kcmil, Conductor Code - 270 -Stranded/Compressed 4/0 or Compact/Solid 250.R2T15M2-N0280-B2
Ranger2 Termination for 15KV outdoor application, cable insulation diameter 0.84 - 1.38 inches for Cable Type - Tape Shield/Wire Shield/ UniShield. Includes Aluminum 2-Hole Spade connector for #2-1250 kcmil, Standard or Compressed 250 /Compact or Solid 300. Stainless Steel Mounting Bracket 1.10 inch - 1.50 inch
R2T28J2-N0250
Ranger2 Termination for 25/28KV outdoor application, cable insulation diameter .84 - 1.38 inches for Concentric Neural and Jacketed Concentric Neutral Cable, Includes Aluminum 2-Hole Spade connector for #2-1250 kcmil, Stranded or Compressed 2/0, Compact or Solid 3/0
PCT1-0260-4-18
15kV, Single Piece Terminator (Class 1), includes Universal Aluminum Rod Contact as standard, Power Cable Termination, Conductor Size - 3/0 Stranded/Compressed or 4/0 Compact/Solid, Use for Insulation Diameter Range from .640 to 1.070 inches. 18 inch contactFrequently Asked Questions
How many sheds does the 15kV outdoor model have?
The 15kV outdoor model of the R2T15 termination features four sheds.
What cable sizes does the R2T15 termination support?
The R2T15 termination supports cable sizes from #2 AWG through 1250 kcmil, covering insulation diameters from 0.64 in (16 mm) to 2.10 in (53 mm).
What is the voltage rating of the R2T15 termination?
The R2T15 termination has a voltage rating of 15 kV. Its maximum design voltage to ground is 9.5 kV.
What is the operating temperature range for the R2T15?
The R2T15 termination operates within an ambient temperature range of -22 to +149 °F (-30 to +65 °C).
What is the maximum altitude for R2T15 installation?
The R2T15 termination can be installed at a maximum altitude of 3300 feet (1005 m).
What are the available sizes for the R2T15 termination?
The R2T15 termination is available in sizes 1, 2, and 4. These three sizes cover the entire specified cable range.
What is the power system frequency range for R2T15?
The R2T15 termination is designed for a power system frequency range of 48 to 62 Hz.
What is the minimum strike distance for the R2T15?
The minimum strike distance for the R2T15 termination is 11.4 in (381 mm).
What is the creepage distance for the R2T15 termination?
The creepage distance for the R2T15 termination is 15.0 in (381 mm).
What is the IEEE classification for the R2T15?
The R2T15 termination has an IEEE Classification of Outdoor = Class 1A.
How to Install the R2T15/28M Ranger 2 Shrink Fit Silicone Rubber Termination for Tape Shielded Cables
This guide provides step-by-step instructions for installing the 15kV & 28kV Ranger 2 Shrink Fit Silicone Rubber Termination on tape shielded cables, including cable preparation, ground braid installation, and termination placement.
Estimated time: 1h 30m
Tools needed:
Crimping tool, Wire strippers, Measuring tape, Solvent applicator, Abrasive (aluminum oxide, grit 120 or finer)
Supplies needed:
R2T15/28M Silicone Rubber Termination Kit, Silicone Lubricant, Gray Silicone Rubber Electrical Tape, Preformed Ground Braid, Sealing Mastic, Copper Foil Tape, Vinyl Tape, Terminal lug or connector, Approved solvent, Aluminum oxide abrasive (optional)
- Prepare Cable and Install Ground Braid
DANGER: All apparatus must be de-energized during installation. Check cable size compatibility and cut to length. Prepare cable dimensions according to Table 1, allowing for terminal lug growth. Secure the tape shield edge with a single wrap of the supplied copper foil tape. Apply the first mastic band 1/4" (6mm) from the jacket end with 50% stretch. Position the preformed ground braid with the solder block centered over the mastic and secure it with vinyl tape. Press the solder block into the mastic. Apply a second mastic band over the solder block, maintaining the 1/4" (6mm) dimension. Wrap two half-lapped layers of vinyl tape around the mastic seal. Wrap the ground braid around the cable tape shield, trim excess, and secure with the constant force spring. Cinch the spring and secure it with two wraps of vinyl tape.
- Install Terminal Lug and Clean Cable Insulation
Check that the termination assembly fits over the selected lug; if not, slide the termination onto the cable before installing the lug, but do not remove the core. Position the connector/lug and crimp it according to the manufacturer's directions, leaving the last 3/8" to 1/2" uncrimped. Remove any excess oxide inhibitor and sharp crimp flashings. Wipe the cable insulation with an approved solvent, ensuring it does not touch the semi-conductive insulation shield. If using an abrasive, apply only aluminum oxide abrasive (grit 120 or finer) to the insulation, being careful not to reduce the cable insulation diameter.
- Install the Silicone Rubber Termination
Create a track-resistant moisture seal by wrapping gray silicone rubber electrical tape around the base of the terminal lug. Cover the edge of the semi-conductive insulation shield with a liberal coating of silicone grease. For lower terminations with a fold-down skirt, pull the loose end of the removable core through the top until it is flush with the bottom. Slide the termination body onto the cable, aligning it with the forward edge of the mastic seal. Carefully remove the core by unwinding counter-clockwise, ensuring the termination body, not the core, is butted against the mastic seal. Do not push or pull the termination during core removal. Apply a thin film of silicone lubricant to the skirt and mastic seal area (avoiding skirt tabs), then carefully fold down the skirt over the mastic seal. Complete the lug area moisture seal with the remaining gray silicone rubber electrical tape, overlapping the termination insulator by approximately 1" and extending over a non-crimped region of the lug/connector barrel with a half-lap. Connect the ground braid to the system ground. Finally, confirm that the High-K step does not exceed 1.5 inches.
Frequently Asked Questions about ABB - Installation Products
How are Thomas and Betts products typically installed?
Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.
What accessories are available for Thomas and Betts products?
Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.
What environmental ratings do Thomas and Betts products have?
Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.
What communication protocols do Thomas and Betts products support?
Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.
What are the key features of Thomas and Betts products?
Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.
What are the main product lines offered by Thomas and Betts?
Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.
What technical support does Thomas and Betts offer?
Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.
What industries and applications are Thomas and Betts products used for?
Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.
What certifications and standards do Thomas and Betts products comply with?
Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.
What are the main product lines offered by Ocal?
Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.