Authorized ABB Distributor (Installation Products)
ABB - Installation Products R2T15J1-T0240 - Ranger2 Termination for 15KV outdoor application, cable insulation diameter .64 - 1.12 inches for Concentric Neural and Jacketed Concentric Neutral Cable, includes Universal Aluminum Barrel For AL or CU Conductor w/copper wire lead #2 to 4/0. 1/0 Stranded or 2/0 Solid

ABB Installation Products R2T15J1-T0240 Ranger2 Termination for 15KV outdoor application, cable insulation diameter .64 - 1.12…

UPC: 783786548767


Documents & Media
Installation InstructionsSpecification SheetManufacturer Product Website

Contact for Pricing

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

The ABB Ranger2 Termination, SKU R2T15J1-T0240, is engineered for robust 15KV outdoor applications. This termination is specifically designed for Concentric Neutral and Jacketed Concentric Neutral cables, accommodating cable insulation diameters ranging from 0.64 to 1.12 inches. It features a Universal Aluminum Barrel, ensuring compatibility with both Aluminum (AL) and Copper (CU) conductors. The included copper wire lead supports conductor sizes from #2 AWG to 4/0 AWG, with specific suitability for 1/0 AWG Stranded or 2/0 AWG Solid conductors. This product from ABB - Installation Products provides a reliable connection point for critical outdoor power distribution systems. Its design prioritizes secure and efficient termination, essential for maintaining the integrity of high-voltage circuits in exposed environments. The Ranger2 series offers a dependable solution for utility, industrial, and commercial installations requiring high-voltage cable termination. Key features include its broad insulation diameter range and versatile conductor compatibility, simplifying inventory and installation processes. The UNSPSC code for this product is 26121648, classifying it within electrical power distribution equipment. Ensure proper application for optimal performance and safety in your 15KV outdoor power infrastructure.
  • Designed for 15KV outdoor applications
  • Accommodates cable insulation diameters from 0.64 to 1.12 inches
  • Suitable for Concentric Neutral and Jacketed Concentric Neutral cables
  • Includes Universal Aluminum Barrel for AL or CU conductors
  • Supports #2 to 4/0 AWG conductors (1/0 Stranded or 2/0 Solid)

Specifications

Application
Cable Termination, Outdoor Application, 15kV
Cable Type
Concentric Neutral Wire
Color
Gray
Conductor Size
1/0 STR AWG , 1/0 COMPR AWG , 2/0 SOL AWG , 2/0 COMPT AWG
Earthing
Products Includes Their Own Grounding System
Mounting
Product Need to have Cable Holder (not included)
Number Of Terminals
(1) Single Phase
Special Features
Silicone Rubber Housing. Lightweight, Compact Design. Pull-Down Tabs for Easy Installation. Thick Wall Construction
Standard
IEEE 48
Type
Cable Termination - Outdoor - Ranger2
Voltage Rating
15 kV
Package Dimensions (L x W x H)
0.01 IN x 0.01 IN x 0.01 IN
Package Dimensions (L x W x H)
0.0254 cm x 0.0254 cm x 0.0254 cm
Package Weight (Imperial)
1.0000 L
Package Weight (Metric)
0.4540 kg
15kV, Single Piece Terminator (Class 1), includes Universal Aluminum Rod Contact as standard, Power Cable Termination, Conductor Size - 1/0 Stranded/Compressed or 2/0 Compact/Solid, Use for Insulation Diameter Range from .640 to 1.070 inches.

PCT10240-4

15kV, Single Piece Terminator (Class 1), includes Universal Aluminum Rod Contact as standard, Power Cable Termination, Conductor Size - 1/0 Stranded/Compressed or 2/0 Compact/Solid, Use for Insulation Diameter Range from .640 to 1.070 inches.
Ranger2 Termination for 15KV outdoor application, cable insulation diameter .64 - 1.12 inches for Concentric Neural and Jacketed Concentric Neutral Cable, includes Universal Aluminum Barrel For AL or CU Conductor w/copper wire lead #2 to 4/0. #2 Stranded to #1 Solid

R2T15J1-T0220

Ranger2 Termination for 15KV outdoor application, cable insulation diameter .64 - 1.12 inches for Concentric Neural and Jacketed Concentric Neutral Cable, includes Universal Aluminum Barrel For AL or CU Conductor w/copper wire lead #2 to 4/0. #2 Stranded to #1 Solid
Ranger2 Termination for 15KV outdoor application, cable insulation diameter .64 - 1.12 inches for Concentric Neural and Jacketed Concentric Neutral Cable, Aluminum 2 Hole Spade #2-1250kcmil, Stranded or Compressed 3/0 /Compact or Solid 4/0.

R2T15J1-N0260

Ranger2 Termination for 15KV outdoor application, cable insulation diameter .64 - 1.12 inches for Concentric Neural and Jacketed Concentric Neutral Cable, Aluminum 2 Hole Spade #2-1250kcmil, Stranded or Compressed 3/0 /Compact or Solid 4/0.
Ranger2 Termination for 35KV outdoor application, cable insulation diameter 1.30 - 2.10 inches for Concentric Neural and Jacketed Concentric Neutral Cable, includes Aluminum 2-Hole Spade connector for #2-1250 kcmil, Stranded or Compressed 400 /Compact or Solid 500, Stainless Steel Mounting Bracket 1.45 inch - 1.95 inch

R2T35J4-N0310-B3

Ranger2 Termination for 35KV outdoor application, cable insulation diameter 1.30 - 2.10 inches for Concentric Neural and Jacketed Concentric Neutral Cable, includes Aluminum 2-Hole Spade connector for #2-1250 kcmil, Stranded or Compressed 400 /Compact or Solid 500, Stainless Steel Mounting Bracket 1.45 inch - 1.95 inch
Ranger2 Termination for 15KV outdoor application, cable insulation diameter .64 - 1.12 inches for Concentric Neural and Jacketed Concentric Neutral Cable, includes Aluminum Barrel For AL Conductor only w/copper wire lead #2 to 4/0. 4/0 Stranded or 250 kcmil Solid

R2T15J1-T1270

Ranger2 Termination for 15KV outdoor application, cable insulation diameter .64 - 1.12 inches for Concentric Neural and Jacketed Concentric Neutral Cable, includes Aluminum Barrel For AL Conductor only w/copper wire lead #2 to 4/0. 4/0 Stranded or 250 kcmil Solid
Ranger2 Termination for 15KV outdoor application, cable insulation diameter .84 - 1.38 inches for Concentric Neural and Jacketed Concentric Neutral Cable, Aluminum 1-Hole Spade #2-500kcmil. Stranded or Compressed 350 /Compact or Solid 400.

R2T15J2-H0300

Ranger2 Termination for 15KV outdoor application, cable insulation diameter .84 - 1.38 inches for Concentric Neural and Jacketed Concentric Neutral Cable, Aluminum 1-Hole Spade #2-500kcmil. Stranded or Compressed 350 /Compact or Solid 400.
Ranger2 Termination for 35KV outdoor application, cable insulation diameter .84 - 1.38 inches for Concentric Neural and Jacketed Concentric Neutral Cable, includes Universal Aluminum Barrel For Aluminum or Copper Conductor with copper wire lead, Stranded or Compressed 1/0 /Compact or Solid 2/0

R2T35J2-T0240

Ranger2 Termination for 35KV outdoor application, cable insulation diameter .84 - 1.38 inches for Concentric Neural and Jacketed Concentric Neutral Cable, includes Universal Aluminum Barrel For Aluminum or Copper Conductor with copper wire lead, Stranded or Compressed 1/0 /Compact or Solid 2/0
Ranger2 Termination. Type - Outdoor, 35kV, Cable Type - Concentric Neutral/Jacketed Concentric Neutral, Insulation Range - .84 inch - 1.38 inch, Connector Type - Aluminum 2-Hole Spade #2-1250 kcmil, Conductor Code - 240 -Stranded or Compressed 1/0 Compact or Solid 2/0.

R2T35J2-N0240

Ranger2 Termination. Type - Outdoor, 35kV, Cable Type - Concentric Neutral/Jacketed Concentric Neutral, Insulation Range - .84 inch - 1.38 inch, Connector Type - Aluminum 2-Hole Spade #2-1250 kcmil, Conductor Code - 240 -Stranded or Compressed 1/0 Compact or Solid 2/0.

Frequently Asked Questions

What cable insulation diameters does this termination support?

This ABB Ranger2 termination supports cable insulation diameters ranging from 0.64 to 1.12 inches.

What types of cables is this termination designed for?

This termination is designed for Concentric Neutral and Jacketed Concentric Neutral cables.

What conductor sizes can be used with this termination?

It supports conductor sizes from #2 AWG to 4/0 AWG, specifically for 1/0 Stranded or 2/0 Solid conductors.

Does this termination work with both aluminum and copper conductors?

Yes, it includes a Universal Aluminum Barrel that is compatible with both Aluminum (AL) and Copper (CU) conductors.

What is the voltage rating for this ABB Ranger2 termination?

This termination is rated for 15KV outdoor applications.

How to Install 15kV & 28kV Ranger 2 Cable Termination

This guide provides detailed instructions for the safe and proper installation of 15kV and 28kV Ranger 2 Cable Terminations on concentric and jacketed concentric neutral cables for indoor/outdoor applications. All apparatus must be de-energized during installation.

Estimated time: 1h 30m

Tools needed:

Crimping tool, Wire strippers, Measuring tape, Utility knife, Abrasive (aluminum oxide 120 grit or finer), Gloves

Supplies needed:

Silicone Rubber Termination kit, Lubricant, Grey Silicone Rubber Tape, Sealing Mastic, Approved solvent, Vinyl tape or binding wire, Terminal lug or connector, Silicone grease

  1. Prepare the Cable

    Verify the cable size against the kit range. Train the cable into position and cut to the required length, ensuring sufficient neutral wire length for grounding. Prepare the cable by stripping the jacket, neutral wires, and semi-con insulation shield according to the specified dimensions, allowing for terminal lug depth. Wrap a band of sealing mastic 1/4 inch (6mm) from the jacket end, then bend neutral wires back and secure them to the cable jacket 4-6 inches (100-150mm) from the cut edge using vinyl tape or binding wire. Apply a second mastic band over the neutral wires and wrap two half-lapped layers of vinyl tape over the mastic seal.

  2. Install Terminal Lug or Connector

    If using a lug that does not fit through the termination core, clean the insulation and slide the termination onto the cable before installing the lug. Position the terminal lug or connector and crimp it according to the manufacturer's directions, ensuring to leave the last 1/4 to 3/8 inch (6-10mm) of the connector uncrimped. After crimping, remove any excess oxide inhibitor and sharp crimp flashings.

  3. Clean Cable Insulation and Lug Barrel

    Wipe the cable insulation with an approved solvent, taking care not to allow the solvent to touch the semi-con insulation shield. If abrasive cleaning is necessary, use only aluminum oxide abrasive (grit 120 or finer) on the insulation, avoiding the semi-con shield and ensuring not to reduce the cable insulation diameter below the kit's allowed range.

  4. Install Termination Body

    Create a track-resistant moisture seal by wrapping one or two layers of grey silicone rubber tape around the base of the terminal lug, adjusting layers to match the insulation diameter if the barrel is smaller. Apply a liberal coating of silicone grease to cover the edge of the semi-con insulation shield, filling any steps. For terminations with a fold-down skirt, pull the loose end of the removable core through the top until it is flush with the bottom. Slide the termination body onto the cable, aligning it with the leading edge of the mastic seal, then carefully remove the core by unwinding it counter-clockwise from the loose end. Ensure the termination body, not the core, is butted against the mastic seal and avoid pushing or pulling the assembly during core removal.

  5. Complete Sealing and Grounding

    Apply a thin film of silicone lubricant to the skirt and mastic seal area, avoiding the skirt tabs. Carefully fold down the skirt over the mastic seal. Complete the lug area moisture seal using the remaining grey silicone rubber tape, overlapping the termination insulator by approximately 1 inch (25mm) and extending the tape wrapping over a non-crimped region of the lug/connector barrel with a half-lap configuration. Finally, twist the concentric neutral wires together and connect them securely to the system ground. Confirm that the High-K step does not exceed 1.5 inches (38mm).

Frequently Asked Questions about ABB - Installation Products

How are Thomas and Betts products typically installed?

Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.

What accessories are available for Thomas and Betts products?

Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.

What environmental ratings do Thomas and Betts products have?

Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.

What communication protocols do Thomas and Betts products support?

Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.

What are the key features of Thomas and Betts products?

Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.

What are the main product lines offered by Thomas and Betts?

Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.

What technical support does Thomas and Betts offer?

Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.

What industries and applications are Thomas and Betts products used for?

Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.

What certifications and standards do Thomas and Betts products comply with?

Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.

What are the main product lines offered by Ocal?

Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.