ABB Installation Products R2IT15M1N2250 Ranger2 Termination, Indoor, 15kv, Cable Type - Tape Shield/WireShield/UniShield…
UPC: 075114376389
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- 15kV indoor termination
- Compatible with tape shield, wire shield, UniShield cables
- Insulation range: 0.64" - 1.12" (16mm-28mm)
- N2 copper 2-hole spade connector
- Conductor sizes: 2/0 AWG stranded/compressed or 3/0 AWG compact/solid
Specifications
Application | Cable Termination, Indoor Application, 15kV |
Cable Type | Copper Tape Shielded Wire |
Color | Gray |
Conductor Size | 2/0 STR AWG , 2/0 COMPR AWG , 3/0 SOL AWG , 3/0 COMPT AWG |
Earthing | Products Includes Their Own Grounding System |
Mounting | Product Need to have Cable Holder (not included) |
Number Of Terminals | (1) Single Phase |
Special Features | Silicone Rubber Housing. Lightweight, Compact Design. Pull-Down Tabs for Easy Installation. Thick Wall Construction |
Standard | IEEE 48 |
Type | Cable Termination - Indoor - Ranger2 |
Voltage Rating | 15 kV |
Package Dimensions (L x W x H) | 0.01 IN x 0.01 IN x 0.01 IN |
Package Dimensions (L x W x H) | 0.0254 cm x 0.0254 cm x 0.0254 cm |
Package Weight (Imperial) | 1.0000 L |
Package Weight (Metric) | 0.4540 kg |
R2T15J1-T0250-B1
Outdoor, Ranger2 Termination, 15kV, Concentric Neutral/Jacketed Concentric Neutral Cable Type, Insulation Range - .64-1.12 inch (16-28mm). Connector Type Universal Aluminum Barrel for AL or CU Conductor with Copper Wire Lead #2-4/0. Conductor - 2/0 Stranded/Compressed or 3/0 Compact/Solid. Cable Mounting Bracket Material - Stainless Steel, Size .80-1.25 inch (20-32mm).
R2T35J4-N0300
Ranger2 Termination for 35KV outdoor application, cable insulation diameter 1.30 - 2.10 for Concentric Neural and Jacketed Concentric Neutral Cable, includes Aluminum 2-Hole Spade connector for #2 through 1250 kcmil. Conductor Code 300 - 350 kcmil Stranded/Compressed or 400 kcmil Compact/Solid.
69TCT234142PABN
69kV, Transmission Cable Terminator, Base and Top Module, Housing Size 3, Connection Type 4 - 4 Hole NEMA, Connector Type - Aluminum, Conductor Size Code 42P, Metallic Screen Kit - Flat Braid, Armour Kit - Heat Shrink, No Bracket Required
R2T15M4-N2410
Outdoor, Ranger2 Termination, 15kV, Cable Type Tape Shield/Wire Shield/Unishield, Insulation Range 1.30 to 2.10 inch (33-53mm). Connector Type Copper 2-Hole Spade #2-1250 kcmil. Conductor Size 1000 Compressed/Stranded.
R2T28J4-N2330
Ranger2 Termination for 25/28KV outdoor application, cable insulation diameter 1.30 - 2.10 inches for Concentric Neutral/Jacketed Concentric Neutral Cable, Copper 2-Hole Spade #2-1250 kcmil, Stranded / Compressed 500 kcmil or Compact / Solid 600 kcmil. No Cable Mounting BracketR2T15J1-H0300
15 kv, Ranger2 Terminator, OutDoor, Concentric Neutral/Jacketed Concentric Neutral, .64 inch to 1.12 inch Insulation Range, Connector Type - Aluminum 1 hole Spade #2-500 kcmil, Conductor Code 300 - Standard or Compressed 350, Compact or Solid 400.
PCT1-3
15kV, Housing Only, Pre-Molded Cable Termination, 2-Hole Spade Lug, For use with Insulation Diameter Range from .830 inch to 1.180 inch.PCT2-3
25kV, Housing Only, Pre-Molded Cable Termination, 2-Hole Spade Lug, For use with Insulation Diameter Range from .830 inch to 1.180 inch.Frequently Asked Questions
What are the available sizes for the R2IT15 termination?
The R2IT15 termination is available in sizes 1, 2, and 4. These three sizes cover the entire cable range.
What is the Lightning Impulse Withstand Voltage (BIL)?
The Lightning Impulse (BIL Dry 110 Withstand) for the R2IT15 termination is 110 kV Crest.
What is the Coronal Extinction Voltage for R2IT15?
The Coronal Extinction Voltage (Partial Discharge) for the R2IT15 termination is 13 kV (≤ 3pC).
What is the IEEE classification for the R2IT15 termination?
The R2IT15 termination has an IEEE Classification of Indoor = Class 2.
What is the power system frequency range for R2IT15?
The R2IT15 termination is designed for power system frequencies ranging from 48 to 62 Hz.
What is the maximum altitude for R2IT15 installation?
The R2IT15 cable termination can be installed at a maximum altitude of 3300 feet (1005 m).
What is the operating temperature range for the R2IT15?
The R2IT15 cable termination operates within an ambient temperature range of -22 to +149 °F (-30 to +65 °C).
What cable insulation diameters does the R2IT15 support?
The R2IT15 termination covers cable insulation diameters from 0.64 in (16 mm) to 2.10 in (53 mm). This accommodates #2 AWG through 1250 kcmil cables.
What is the voltage rating of the R2IT15 termination?
The R2IT15 cable termination has a voltage rating of 15 kV. Its maximum design voltage to ground is 9.5 kV.
What are the available sizes for the R2IT15 termination?
The R2IT15 termination is available in sizes 1, 2, and 4. These three sizes cover the entire cable range.
How to Install the 15kV Ranger 2 Shrink-fit Silicone Rubber Termination (R2IT15M)
Complete installation guide for the 15kV Ranger 2 Shrink-fit Silicone Rubber Termination (R2IT15M) for indoor applications. This guide details cable preparation, grounding, lug installation, cleaning, and final termination steps.
Estimated time: 1h
Tools needed:
Cable knife/Wire strippers, Crimping tool, Multimeter
Supplies needed:
Silicone Rubber Termination, Preformed Ground Braid, Constant Force Spring, Silicone Lubricant, Copper Foil Tape, Vinyl tape, Solvent saturated pads, Aluminum oxide abrasive, Terminal lug/Connector, Gloves
- Prepare the Cable
WARNING: Ensure all apparatus is de-energized and verified before beginning installation. This product must be installed by competent personnel trained in high voltage safety. Inspect all kit components for damage and compatibility. Prepare the cable by cutting it to the required length and stripping the jacket, semi-con, and insulation according to the provided dimensions, allowing for terminal lug depth and growth allowance. For tape shield cables, secure the tape shield with copper foil tape.
- Install Ground Braid
Wrap one band of vinyl tape 1/4 inch (6mm) from the cable jacket end. Position the preformed ground braid with its short tail over the shield wires/tape shield and the solder block centered over the vinyl tape marker. Secure the ground braid to the cable jacket with vinyl tape. Apply a second vinyl tape band directly over the original marker and solder block. Wrap the ground braid around the cable shield one complete wrap, trim any excess, and secure it in place with the constant force spring. Secure the spring with two wraps of vinyl tape.
- Install Terminal Lug or Connector
Verify that the termination assembly will fit over the selected lug. If not, slide the termination onto the cable before installing the lug (do not remove the core yet). Position the connector or lug and crimp it according to the manufacturer's directions. Do not crimp the last 3/8 to 1/2 inch of the connector. After crimping, remove any excess oxide inhibitor and all sharp crimp flashings or edges.
- Clean Cable Insulation and Lug Barrel
Wipe the cable insulation thoroughly with solvent-saturated pads, ensuring no solvent touches the semi-conductive insulation shield. If abrasive cleaning is necessary, use only aluminum oxide abrasive (grit 120 or finer) on the insulation, and be careful not to reduce the cable insulation diameter below the kit's specified allowance. Do not use abrasive on the semi-conductive insulation shield.
- Install Termination Body
Apply a liberal coating of silicone grease (lubricant) to the edge of the semi-conductive insulation shield to fill the step at the semi-con cut-off. Slide the termination body onto the cable, carefully aligning its edge with the forward edge of the vinyl tape marker. Begin to remove the core by pulling counter-clockwise. Recheck the termination's position and continue removing the core. Avoid pushing or pulling on the termination assembly while removing the core. Finally, connect the ground braid to the system ground.
Frequently Asked Questions about ABB - Installation Products
How are Thomas and Betts products typically installed?
Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.
What accessories are available for Thomas and Betts products?
Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.
What environmental ratings do Thomas and Betts products have?
Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.
What communication protocols do Thomas and Betts products support?
Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.
What are the key features of Thomas and Betts products?
Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.
What are the main product lines offered by Thomas and Betts?
Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.
What technical support does Thomas and Betts offer?
Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.
What industries and applications are Thomas and Betts products used for?
Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.
What certifications and standards do Thomas and Betts products comply with?
Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.
What are the main product lines offered by Ocal?
Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.