Authorized ABB Distributor (Installation Products)
ABB - Installation Products K650-J4-4 - 15/25kV 600 Series Deadbreak 4-Point Junction, Rubber Junction only.

ABB Installation Products K650-J4-4 15/25kV 600 Series Deadbreak 4-Point Junction, Rubber Junction only.

UPC: 783786263882


Documents & Media
Installation InstructionsSpecification SheetManufacturer Product Website

Contact for Pricing

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

ABB K650-J4-4 is a 15/25kV 600A deadbreak 4-way junction for medium-voltage power distribution. Fully shielded and submersible, it ensures reliable connections in underground residential, commercial, and industrial systems. Deadbreak design allows safe disconnection of energized circuits for maintenance and fault isolation. Supports 15kV (8.3kV phase-to-ground) and 25kV (16.2kV phase-to-ground) classes. Impulse withstand: 95kV BIL (15kV), 140kV BIL (25kV). Construction: 100% peroxide-cured EPDM rubber, fully shielded housing for subsurface, vault, or padmount installations. Compatible with Elastimold® 600A Series Elbow connectors. Includes stainless steel mounting bracket with back plate for secure flat-surface installation. Applications: Sectionalizing, looping, tapping, and equipment bypass in medium-voltage systems. Part of ABB Installation Products catalog, SKU K650-J4-4.
  • 15/25kV voltage class with 600A continuous current rating
  • Fully shielded, fully submersible molded rubber housing
  • Deadbreak design for safe energized circuit disconnection
  • Stainless steel mounting bracket with back plate included
  • Compatible with Elastimold® 600A Series Elbow connectors

Specifications

Application
Designed for subsurface, vault or padmount applications and can be used for sectionalizing, looping, tapping, and equipment bypass
Connection
Push-In
Material
EPDM-Rubber and Stainless Steel Bracket
Special Features
Fully shielded, fully submersible molded rubber housing. 100 percent peroxide-cured construction includes insulation and conductive EPDM materials. Provides mating for Elastimold 600 Amp Series Elbow connectors. Rubber Junction Only
Standard
ANSI/IEEE Standard 386
Temperature Rating, Maximum
149 F
Temperature Rating, Maximum
65 C
Temperature Rating, Minimum
-40 F
Temperature Rating, Minimum
-40 C
Type
4-Point Rubber Junction
Package Dimensions (L x W x H)
0.01 IN x 0.01 IN x 0.01 IN
Package Dimensions (L x W x H)
0.0254 cm x 0.0254 cm x 0.0254 cm
Package Weight (Imperial)
1.0000 L
Package Weight (Metric)
0.4540 kg
6 Point Junction, with one 600 Amp Bushing Interfaces, four 200 Amp Bushing Well Interface and one 600 Amp Bushing Interface, 25kV, No Tilt Mounting.

J6-622226-25

6 Point Junction, with one 600 Amp Bushing Interfaces, four 200 Amp Bushing Well Interface and one 600 Amp Bushing Interface, 25kV, No Tilt Mounting.
15/25kV 600 Series Deadbreak 2-Point Junction, Rubber Junction with stainless steel mounting plate, back plate and adjustable mounting bracket.

K650-J2-U

15/25kV 600 Series Deadbreak 2-Point Junction, Rubber Junction with stainless steel mounting plate, back plate and adjustable mounting bracket.
15/25kV 600 Series Deadbreak 2-Point Junction, Rubber Junction only.

K650-J2-4

15/25kV 600 Series Deadbreak 2-Point Junction, Rubber Junction only.
Junction, 2pt, 600 Amp Dead Break , 15/25kv With bracket

K650J2SP

Junction, 2pt, 600 Amp Dead Break , 15/25kv With bracket
15/25kV 600 Series Deadbreak 4-Point Junction, Rubber Junction with stainless steel mounting plate, back plate and adjustable mounting bracket.

K650-J4-U

15/25kV 600 Series Deadbreak 4-Point Junction, Rubber Junction with stainless steel mounting plate, back plate and adjustable mounting bracket.
15/25kV 600 Series Deadbreak 3-Point Junction, Rubber Junction, Stainless Steel U-Straps and Back Plate.

K650-J3-5

15/25kV 600 Series Deadbreak 3-Point Junction, Rubber Junction, Stainless Steel U-Straps and Back Plate.
15/25kV 600 Series Deadbreak 4-Point Junction, Rubber Junction, Stainless Steel U-Straps and Back Plate.

K650-J4-5

15/25kV 600 Series Deadbreak 4-Point Junction, Rubber Junction, Stainless Steel U-Straps and Back Plate.
15/25kV 600 Series Deadbreak 2-Point Junction, Rubber Junction, Stainless Steel U-Straps and Back Plate.

K650-J2-5

15/25kV 600 Series Deadbreak 2-Point Junction, Rubber Junction, Stainless Steel U-Straps and Back Plate.

Frequently Asked Questions

What items are included in the K650J4 kit?

The K650J4 kit includes one basic molded junction, mounting hardware, two tubes of lubricant, installation instructions, and four protective caps.

What are the withstand voltage ratings for the 28kV K650J4?

For 28kV, the K650J4 has a 140kV BIL impulse, 45kV AC one-minute, and 84kV DC 15-minute withstand rating.

What are the 28kV operating voltage ratings for the K650J4?

For 28kV, the K650J4 has a 16.2kV Max Phase-to-Ground operating voltage and 28kV Max Phase-to-Phase.

What is the continuous current rating for the K650J4?

The K650J4 has a 600 Amp continuous current rating for both 15kV and 28kV voltage classes.

What are the withstand voltage ratings for the 15kV K650J4?

For 15kV, the K650J4 has a 95kV BIL impulse, 34kV AC one-minute, and 53kV DC 15-minute withstand rating.

What are the 15kV operating voltage ratings for the K650J4?

For 15kV, the K650J4 has an 8.3kV Max Phase-to-Ground operating voltage and 14.4kV Max Phase-to-Phase.

What connectors are compatible with the K650J4?

The K650J4 provides mating for Elastimold® 600 A Series Elbow connectors.

What is the K650J4 product type and rating?

The K650J4 is a 15/25kV, 600 Amp Deadbreak 4-Way Junction.

What are typical applications for ELASTIMOLD® junctions?

ELASTIMOLD® junctions are designed for subsurface, vault, or padmount applications, used for sectionalizing, looping, tapping, and equipment bypass.

What ELASTIMOLD® products are compatible with these junctions?

ELASTIMOLD® junctions are designed to mate with K655 Elbow Connector, K655BE Bushing Extender, and 655BEA3 Bushing Adapter.

How to Install the LINK-C Deadbreak Cam Link Operable Connector System

This guide provides step-by-step instructions for the safe and proper installation of the LINK-C 600 amp deadbreak cam link operable connector system, including mounting, wiring, and connection procedures for 15kV and 25kV applications.

Estimated time: 2h

Tools needed:

Hot stick, Torque wrench, Socket wrench, 600ATM Operating Tool, Wire strippers, Suitable tool (for 1 inch hex), Welding equipment (if using welded studs)

Supplies needed:

ELASTIMOLD supplied lubricant, 3/8-16 x 2 inch studs (if applicable), Hex nuts (3/8-16), Lockwashers, Spacers (optional), #14 AWG or #12 AWG solid copper wire, Appropriate grounding connectors

  1. Prepare for Installation and Ensure Safety

    DANGER: All apparatus must be de-energized during installation or removal of parts. Inspect all components for damage, proper rating, and compatibility with mating parts. Ensure the installation is performed by competent personnel trained in high voltage electrical equipment safety practices. Check package contents for completeness and ensure all required tools are at hand. Remove any protective shipping covers and replace with appropriate HV insulated caps or connectors before energizing.

  2. Install the 600 Amp Elbow onto the Cable

    Install the 600 amp elbow onto the cable according to the specific installation instructions supplied with the elbow. Ensure that the elbow is positioned to align correctly with the stand-off plug.

  3. Mount the Stand-Off Plug (If Applicable)

    If applicable, weld three 3/8-16 x 2 inch studs to the faceplate according to customer standard practice and specified dimensions. Install three hex nuts onto the studs to support the stand-off plug, or use three spacers. Position the stand-off plug over the studs, resting on the nuts or spacers. Secure the stand-off plug by installing a lockwasher and a hex nut on each of the three studs, then tighten to 12 foot-lbs torque. Verify that the top surfaces of the apparatus bushing and the stand-off plug are in-line; readjust nuts if necessary.

  4. Install the Bushing Extender and Elbow

    Clean and thoroughly lubricate the apparatus bushing and both interfaces of the 600 amp bushing extender using ELASTIMOLD supplied lubricant. Install the bushing extender onto the apparatus bushing. Insert the 600ATM into the retainer contact and engage its internal hex broach. Insert the retainer contact into the bushing extender and thread it into the apparatus bushing using a suitable tool applied to the 1-inch hex portion of the 600ATM, torquing to 50-60 ft-lbs. Next, clean and lubricate the epoxy standoff plug and both interfaces of the 600 amp elbow with ELASTIMOLD lubricant. Install the elbow onto the epoxy standoff plug. Insert the 600AMT into the retainer contact and engage its internal hex broach. Insert the retainer contact into the 600 amp elbow through the compression lug hole and thread it into the epoxy standoff plug, torquing to 50-60 ft-lbs.

  5. Install the Alignment Bracket

    Remove the bushing extender clamp and elbow clamp from the alignment bracket. Position the alignment bracket on the bushing extender at a dimension of 2.5 inches (63.5mm) from the grounding eye. Assemble the bushing extender clamp to the alignment bracket using the supplied hardware, and torque by alternating sides until the clamp tabs are flush with each other and tight on both sides.

  6. Position and Secure the Elbow in the Alignment Bracket

    Carefully position the elbow within the alignment bracket, ensuring that the elbow cuff is lined up evenly with the bushing extender cuff. Assemble the elbow clamp to the alignment bracket with the supplied hardware. Torque the clamp by alternating sides until the clamp tabs are flush with each other and tight on both sides. Ensure the elbow clamp notch faces the cable entrance of the elbow.

  7. Insert and Engage the LINK-C Connector

    Clean and thoroughly lubricate both 600 ampere interfaces of the LINK-C connector with ELASTIMOLD supplied lubricant. Align the LINK-C connector so that when inserted into the bushing extender and elbow, it is perpendicular to the switch faceplate. Insert the LINK-C connector into the bushing extender and elbow, making sure both lever arms are positioned on the inside of the alignment bracket legs. Engage the pivot pin into the slots in the alignment bracket legs. While pushing inward, use a hot stick applied to the hot stick eye to move the lever arms downward, engaging the roller pin and moving the LINK-C connector inward. Continue moving the lever arms until they are perpendicular to the alignment bracket leg.

  8. Perform Grounding Procedures

    Ground the elbow: Feed a #14 AWG or #12 AWG solid copper wire through the grounding eye on the elbow, twist it tight, and connect it to a reliable ground point. Clean and lubricate the 200 amp interface on the LINK-C connector. Ground, then install the desired mating product onto the 200 amp interface according to its specific installation instructions. Ground the cable: If using concentric neutral cable, twist the concentric neutral wires together and connect them to ground using an appropriate connector. If using 20MA or 21MA grounding devices, connect the ground lead from the device to ground using a suitable connector. For three-phase installations, ensure all grounds from all three phases are tied to a common ground point.

Frequently Asked Questions about ABB - Installation Products

How are Thomas and Betts products typically installed?

Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.

What accessories are available for Thomas and Betts products?

Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.

What environmental ratings do Thomas and Betts products have?

Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.

What communication protocols do Thomas and Betts products support?

Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.

What are the key features of Thomas and Betts products?

Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.

What are the main product lines offered by Thomas and Betts?

Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.

What technical support does Thomas and Betts offer?

Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.

What industries and applications are Thomas and Betts products used for?

Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.

What certifications and standards do Thomas and Betts products comply with?

Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.

What are the main product lines offered by Ocal?

Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.