Contact for Pricing
Overview
- 15/25 kV voltage rating for high-power applications
- 600 Series deadbreak junction with 4 poles
- Center feed type with 4 terminals
- Supports overhead/underground line feed (top/bottom)
- Includes triplex ground and is UL & utility approved (SCE&G)
Specifications
Application | Designed for subsurface, vault or padmount applications and can be used for sectionalizing, looping, tapping, and equipment bypass |
Connection | Push-In |
Material | EPDM-Rubber and Stainless Steel Bracket |
Special Features | Fully shielded, fully submersible molded rubber housing. 100 percent peroxide-cured construction includes insulation and conductive EPDM materials. Provides mating for Elastimold 600 Amp Series Elbow connectors. Stainless Steel Mounting Plate, Back Plate and Adjustable Mounting Bracket |
Standard | ANSI/IEEE Standard 386 |
Temperature Rating, Maximum | 149 F |
Temperature Rating, Maximum | 65 C |
Temperature Rating, Minimum | -40 F |
Temperature Rating, Minimum | -40 C |
Type | 4-Point Rubber Junction |
Package Dimensions (L x W x H) | 0.01 IN x 0.01 IN x 0.01 IN |
Package Dimensions (L x W x H) | 0.0254 cm x 0.0254 cm x 0.0254 cm |
Package Weight (Imperial) | 17.0000 L |
Package Weight (Metric) | 7.7110 kg |
J4-6226-15
4 Point Junction, with one 200 Amp Bushing Well Interface, two 600 Amp Bushing interfaces and one 200 Amp Bushing Well Interface, 15kV, No Tilt Mounting.
Frequently Asked Questions
What items are included in the K650J4 kit?
Each kit contains one basic molded K650J4 junction, mounting hardware 600J4-6, two tubes of lubricant 82-08, one installation instruction IS-0207, and four protective caps 650PPC-01.
What standard does the K650J4 junction meet?
The K650J4 junction meets ANSI/IEEE Standard 386, Latest Revision.
What is the maximum operating voltage for 28kV class?
For the 28kV voltage class, the maximum phase-to-ground operating voltage is 16.2kV, and the maximum phase-to-phase is 28kV.
What is the maximum operating voltage for 15kV class?
For the 15kV voltage class, the maximum phase-to-ground operating voltage is 8.3kV, and the maximum phase-to-phase is 14.4kV.
What is the continuous current rating for the K650J4?
The K650J4 junction has a continuous current rating of 600 Amp for both 15kV and 28kV voltage classes.
What products are compatible with the K650J4 junction?
The K650J4 junction provides mating for Elastimold® 600 A Series Elbow connectors. It also mates with K655 Elbow Connector, K655BE Bushing Extender, and 655BEA3 Bushing Adapter.
What are the applications for the K650J4 junction?
The K650J4 junction is designed for subsurface, vault, or padmount applications. It can be used for sectionalizing, looping, tapping, and equipment bypass.
What is the K650J4 product?
The K650J4 is a 15/25kV, 600 Amp Deadbreak 4-Way Junction with a fully shielded, submersible molded rubber housing. It is made with 100% peroxide-cured EPDM materials.
What products are compatible with the K650J4 junction?
The K650J4 junction provides mating for Elastimold® 600 A Series Elbow connectors. It also mates with K655 Elbow Connector, K655BE Bushing Extender, and 655BEA3 Bushing Adapter.
What standard does the K650J4 junction meet?
The K650J4 junction meets ANSI/IEEE Standard 386, Latest Revision.
How to Install the LINK-C Deadbreak Cam Link Operable Connector System
This guide provides step-by-step instructions for installing the LINK-C 600 amp deadbreak cam link operable connector system, including mounting, lubrication, and grounding procedures. Ensure all apparatus are de-energized before beginning.
Estimated time: 2h
Tools needed:
ELASTIMOLD supplied lubricant, Torque wrench with 1 inch hex socket, Hot stick, Wire strippers, Connector crimping tool
Supplies needed:
600 amp elbow (pre-installed on cable), Apparatus bushing, Epoxy standoff plug, Alignment bracket hardware (hex bolts, lock washers), #14 AWG or #12 AWG solid copper grounding wire, Appropriate grounding connector, HV insulated caps or connectors (if needed), Bails (for 200A deadbreak connectors, if applicable)
- Ensure Safety and Prepare Components
DANGER: De-energize all apparatus before installation or removal. Inspect all parts for damage, proper rating, and compatibility with mating components. If supplied with protective shipping covers, remove them and replace with appropriate HV insulated caps or connectors before energizing. Ensure all required tools and supplies are at hand and maintain cleanliness.
- Install 600 Amp Elbow onto Cable
Install the 600 amp elbow onto the cable according to its specific installation instructions. Ensure it is positioned to align correctly with the standoff plug.
- Prepare and Install Bushing Extender and Elbow
Clean and thoroughly lubricate the apparatus bushing and both interfaces of the 600 amp bushing extender with ELASTIMOLD supplied lubricant. Install the bushing extender onto the apparatus bushing. Insert the 600ATM into the retainer contact, engage the internal hex broach, and thread it into the apparatus bushing using a suitable tool applied to the 1” hex portion, torquing to 50-60 ft-lbs. Similarly, clean and lubricate the epoxy standoff plug and both interfaces of the 600 amp elbow. Install the elbow onto the epoxy standoff plug, insert the 600AMT into the retainer contact, and thread it into the epoxy standoff plug, torquing to 50-60 ft-lbs.
- Install and Secure the Alignment Bracket
Remove the bushing extender clamp and elbow clamp from the alignment bracket. Position the alignment bracket on the bushing extender 2.5 inches (63.5mm) from the grounding eye. Assemble the bushing extender clamp to the alignment bracket with the supplied hardware, torquing by alternating sides until the clamp tabs are flush and tight. Position the elbow in the alignment bracket so its cuff aligns evenly with the bushing extender cuff. Assemble the elbow clamp to the alignment bracket with supplied hardware, torquing by alternating sides until tabs are flush and tight. Ensure the elbow clamp notch faces the cable entrance.
- Insert and Engage the Link
Clean and thoroughly lubricate both 600 ampere interfaces of the Link with ELASTIMOLD supplied lubricant. Align the Link to be perpendicular to the switch faceplate when inserted. Insert the Link into the bushing extender and elbow, ensuring both lever arms are inside the alignment bracket legs. Engage the pivot pin into the alignment bracket leg slots. While pushing inward, use a hot stick to move the lever arms downward, engaging the roller pin and moving the Link inward until the lever arms are perpendicular to the alignment bracket leg.
- Ground the System Components
Ground the elbow by feeding a #14 AWG or #12 AWG solid copper wire through its grounding eye, twisting it tight, and connecting it to ground. Clean and lubricate the 200 amp interface on the Link, then install the desired mating product according to its instructions and ground it. Ground the cable by twisting concentric neutral wires together and connecting to ground with an appropriate connector, or by connecting the ground lead from 20MA/21MA devices to ground. For three-phase installations, tie all grounds to a common ground point.
Frequently Asked Questions about ABB - Installation Products
How are Thomas and Betts products typically installed?
Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.
What accessories are available for Thomas and Betts products?
Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.
What environmental ratings do Thomas and Betts products have?
Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.
What communication protocols do Thomas and Betts products support?
Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.
What are the key features of Thomas and Betts products?
Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.
What are the main product lines offered by Thomas and Betts?
Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.
What technical support does Thomas and Betts offer?
Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.
What industries and applications are Thomas and Betts products used for?
Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.
What certifications and standards do Thomas and Betts products comply with?
Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.
What are the main product lines offered by Ocal?
Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.