
ABB Installation Products K151LYFAB1220 Locking Y Splice, 15/25KV, 200 Amp. DeadBreak, Cable Insulation Diameter 0.625 inch to…
UPC: 783786635665
Contact for Pricing
Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.
Overview
- 15/25kV, 200 Amp Deadbreak Locking "Y" Splice
- Fully shielded and fully submersible molded rubber housing
- Permanent locking apparatus with 500 lb pull withstand
- Accommodates cable insulation diameters from 0.575" to 1.220"
- Aluminum compression lug for AWG #2 stranded / #1 solid conductors
Specifications
Amperage Rating | 200 A |
Application | Used where a new tap is required on an existing cable or where a Y-joint is required in a new cable installation |
Color | Black |
Conductor Range | #2 STR/COMPR AWG , #1 SOL/COMPT AWG |
Connection Type | Compression Lug |
Current Rating | 200 A |
Environmental Conditions | All Weather Conditions |
Insulation | True |
Length | 22.3 in |
Length | 566.42 mm |
Material | Aluminum (compression lug) |
Material | Housing - EPDM-Rubber |
Series | K151LY |
Size | Cable Insulation Diameter 0.625-0.735 inch, Conductor Size AWG #2/Solid #1 (33.62 mm²) |
Special Features | Permanent Locking Apparatus, Fully Shielded, Fully Submersible Molded Rubber Housing, 100 Percent Peroxide Cured Construction includes Insulation and Conductive EPDM Materials |
Standard | ANSI/IEEE Standard 386 |
Temperature Rating, Maximum | 149 F |
Temperature Rating, Maximum | 65 C |
Temperature Rating, Minimum | -40 F |
Temperature Rating, Minimum | -40 C |
Type | Deadbreak Locking Splice with Test Point |
Voltage Rating | 15 to 25 kV |
Voltage Rating | 15/25 kV |
Package Dimensions (L x W x H) | 0.01 IN x 0.01 IN x 0.01 IN |
Package Dimensions (L x W x H) | 0.0254 cm x 0.0254 cm x 0.0254 cm |
Package Weight (Imperial) | 0.0010 L |
Package Weight (Metric) | 0.0010 kg |

168FLR1-B5220
Molded Current Limiting Fuse Housing, Nominal Fuse Voltage Rating 8.3kV, Fuse Test Port - Two Capacitive Test Ports, Small Housing, Cable Insulation Diameter 0.635 inch - 0.905 inch / 16-23mm, Bi-Metal Conductor size 2 AWG Stranded/Compressed, 1 AWG Solid/Compact. no Sealing Kit
K151LYFG1220
Locking Y Splice, 15/25KV, 200 Amp. DeadBreak, Cable Insulation Diameter 0.725 inch to 0.835 inch. Aluminum Compression Lug. Conductor Size AWG Compressed Stranded #2/Solid #1/mmSquared 33.62.
K676LR-M2410
900 Amp, 15/25kV, 600 Series Elbow with Test Point, with Insulated Plug, Cap, Stud, Lug and Cable Adapter. Cable Insulation Diameter 1.370 inch to 1.630 inch. Copper Compression Lug. Conductor Size Compressed Stranded 1000 kcmil. No Sealing Kit.
K656RLR-H0270-S
600 Amp, 15/25kV, 600 Series Deadbreak, Replacement Elbow with Test Point, Cable Insulation Diameter 0.850 inch to 1.050 inch. Aluminum Compression Lug. Conductor Size Compressed Stranded 4/0 AWG or Compacted Solid 250 kcmil. With Sealing Kit - Cold Shrinkable Jacket Seal.
K656RLR-K0330-S
15-25kV, 600 Amp, Replacement Elbow. Aluminum Compression Lug. Cable Insulation Diameter 1.090 inch to 1.310 inch. Conductor Size AWG or kcmil, Compressed Stranded 500 /Compacted Solid 600 /mmSquared Compact 250/300. Cold-Shrinkable Jacket Seal Included.
K656RLR-K0330-SG3
15-25kV, 600 Amp, Replacement Elbow. Aluminum Compression Lug. Cable Insulation Diameter 1.090 inch to 1.310 inch. Conductor Size AWG or kcmil, Compressed Stranded 500 /Compacted Solid 600 /mmSquared Compact 250/300. With Cold Shrinkable Seal with Copper Braid and Constant Force Spring.
K676LR-M2380
900 Amp, 15/25kV, 600 Series Elbow with Test Point, with Insulated Plug, Cap, Stud, Lug and Cable Adapter. Cable Insulation Diameter 1.370 inch to 1.630 inch. Copper Compression Lug. Conductor Size Compressed Stranded 700/750 kcmil or Compacted Solid 900 kcmil. No Sealing Kit.
K655RLR-N-0410
600 Amp, 15/25kV, 600 Series Deadbreak, Replacement Elbow without Test Point, Cable Insulation Diameter 1.515 inch to 1.780 inch. Aluminum Compression Lug. Conductor Size AWG or kcmil, Compressed Stranded 1000.Frequently Asked Questions
What is the voltage rating of this ABB Y splice?
The ABB K151LYFAB1220 Locking Y Splice has a voltage rating of 15/25 kV.
What is the current rating for the K151LYFAB1220 splice?
This ABB splice is rated for 200 Amps.
What cable insulation diameter range does this splice support?
The K151LYFAB1220 supports cable insulation diameters from 0.625 inch to 0.735 inch.
What type of connection does the K151LYFAB1220 offer?
This ABB splice features a DeadBreak connection type.
What material is the compression lug made of?
The compression lug on the K151LYFAB1220 is made of aluminum.
What conductor sizes can be terminated with this splice?
It is designed for compressed stranded AWG #2 or solid AWG #1 conductors (33.62 mm²).
How to Install the K151LY 3-Way Deadbreak Splice
This guide details the installation of the K151LY 3-Way Deadbreak Non-Separable Straight Receptacle, designed to permanently connect solid dielectric cables by mating with three K151LSR connectors.
Estimated time: 1h
Tools needed:
Wire strippers, Crimping tool, Multimeter or Voltage Detector, Torque wrench
Supplies needed:
Copper wire (#14 AWG or equivalent), Silicone grease, Nylon venting rod
- Prepare K151LSR Connectors and De-energize System
Before starting, ensure all apparatus is de-energized. Follow the separate installation instructions (IS-K151LSR) for the three K151LSR connectors, completing only STEPS 1-3. This typically involves preparing the cable ends and installing the K151LSRs onto the cables. Verify the system is de-energized using appropriate safety procedures and equipment. Failure to de-energize will result in serious or fatal injury.
- Connect K151LY to K151LSR Receptacles
Lubricate the nose of the K151LSR receptacle with silicone grease. Insert the nylon venting rod into the receptacle face until it bottoms, approximately 1 3/4 inches. Carefully insert the K151LY assembly into the receptacle as far as possible until you feel the contact assembly 'CLICK' into its final locked position. Verify the locking assembly contact by pulling on the cables, not the housings. If parts separate, repeat the lubrication and insertion. Pull out the nylon rod. Repeat this process for the remaining two K151LSR interfaces.
- Ground the K151LY Assembly
Connect a length of #14 AWG (or equivalent) copper wire (customer supplied) through the grounding tab of the K151LY and twist it tightly as shown in the documentation. Then, connect this grounding assembly of the locking 'Y' to the system ground by merging it with the cable shield of each cable. Seal all grounding wires and connections to prevent corrosion and ensure a reliable ground.
Frequently Asked Questions about ABB - Installation Products
How are Thomas and Betts products typically installed?
Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.
What accessories are available for Thomas and Betts products?
Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.
What environmental ratings do Thomas and Betts products have?
Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.
What communication protocols do Thomas and Betts products support?
Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.
What are the key features of Thomas and Betts products?
Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.
What are the main product lines offered by Thomas and Betts?
Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.
What technical support does Thomas and Betts offer?
Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.
What industries and applications are Thomas and Betts products used for?
Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.
What certifications and standards do Thomas and Betts products comply with?
Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.
What are the main product lines offered by Ocal?
Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.