Authorized ABB Distributor (Installation Products)
ABB - Installation Products ASP250 - Type ASP Aluminum Splice, Max 35kV, Wire Size 250 kcmil, Length 4 Inch, Tin Plated, Die Color Code Red

ABB Installation Products ASP250 Type ASP Aluminum Splice, Max 35kV, Wire Size 250 kcmil, Length 4 Inch, Tin Plated, Die…

UPC: 783786610693


Documents & Media
Installation InstructionsSpecification SheetVideo ClipManufacturer Product Website

Contact for Pricing

Minimum Qty: 5

Multiplier: 5

*Contact for lower quantities*

Call +1 (262) 252-1600 (toll-free 877-268-3700) or email [email protected] for pricing and availability.

Overview

The ABB Type ASP Aluminum Splice (SKU: ASP250) is a high-conductivity, seamless aluminum tubing splice designed for reliable electrical connections in medium voltage applications up to 35kV. Engineered for aluminum-to-aluminum, aluminum-to-copper, or copper-to-copper conductor splices, this splice accommodates concentric, compressed, or compact conductor types. The ASP250 is rated for 250 kcmil wire sizes, with a 4-inch length providing ample surface area for robust crimping and conductivity. Constructed from high-conductivity aluminum, it ensures efficient current transfer while the tin plating delivers corrosion resistance for long-term reliability in diverse environmental conditions. The splice features chamfered barrels for easier installation and is prefilled with an oxide-inhibiting compound to prevent oxidation at the connection point. The red die color code enables quick identification and compatibility with standard crimping tools, including Blackburn®, Burndy®, T&B®, or Anderson tools. This splice is ideal for power distribution and transmission systems where secure, high-voltage terminations are critical. Its design and specifications make it a practical choice for electricians and engineers requiring dependable medium voltage splicing solutions in industrial, utility, and commercial applications.
  • Designed for aluminum-to-aluminum, aluminum-to-copper, or copper-to-copper conductor splices
  • Supports concentric, compressed, or compact conductor types
  • Rated for 250 kcmil wire size with 4-inch length
  • High-conductivity seamless aluminum tubing with tin plating for corrosion resistance
  • Prefilled with oxide-inhibiting compound to prevent oxidation
  • Chamfered barrels for easier installation
  • Red die color code for quick tool and die identification
  • Compatible with Blackburn®, Burndy®, T&B®, or Anderson crimping tools

Specifications

Color
Red
Finish
Tin Plated
Material
Aluminum
Special Features
Made of high-conductivity seamless aluminum tubing. Tin plated for corrosion resistance
Standard
UL E9809
Type
Aluminum Splice
Voltage Rating
35 kV
Package Dimensions (L x W x H)
4 IN x 4 IN x 3 IN
Package Dimensions (L x W x H)
10.16 cm x 10.16 cm x 7.62 cm
Package Weight (Imperial)
0.1700 L
Package Weight (Metric)
0.0770 kg
1 HoleStandard BarrelAluminum Compression Lug250MCM -1/2 Bolt Standard BarrelAluminum Compression Lugs is a type ofaluminum compression connector that is produced from high conductivityaluminum tubing.Center stop assures proper cable installation.They are tin-plated to provide corrosion resistance and are marked with die index and color coded for easy reference. Listed for 35KV maximum when properly installed.

AL250-48

1 HoleStandard BarrelAluminum Compression Lug250MCM -1/2 Bolt Standard BarrelAluminum Compression Lugs is a type ofaluminum compression connector that is produced from high conductivityaluminum tubing.Center stop assures proper cable installation.They are tin-plated to provide corrosion resistance and are marked with die index and color coded for easy reference. Listed for 35KV maximum when properly installed.
Two-Way Aluminum Splice Connector, Wire Size 250 kcmil, Die Code 71, Die Color Code Red

60554

Two-Way Aluminum Splice Connector, Wire Size 250 kcmil, Die Code 71, Die Color Code Red
Aluminum Compression Splice, Tin-Plated to inhibit corrosion, high conductivity thick wall aluminum, Factory pre-filled joint compound and sealed with easy pull-out end plug to inhibit corrosion, Panduit and specified competitor die index numbers marked on barrel for proper crimp die selection, Internal solid stop prevents over-insertion of conductor, UL Listed and CSA Certified to 35 KV and temperature rated to 90C when crimped with Panduit and specified competitor crimping tools and dies.

SA250-E

Aluminum Compression Splice, Tin-Plated to inhibit corrosion, high conductivity thick wall aluminum, Factory pre-filled joint compound and sealed with easy pull-out end plug to inhibit corrosion, Panduit and specified competitor die index numbers marked on barrel for proper crimp die selection, Internal solid stop prevents over-insertion of conductor, UL Listed and CSA Certified to 35 KV and temperature rated to 90C when crimped with Panduit and specified competitor crimping tools and dies.
Butt Splice 0.26 to 1.5 mm - 22 to 16 AWG - Red

1SET141002R0000

Butt Splice 0.26 to 1.5 mm - 22 to 16 AWG - Red
Type ASP Aluminum Splice, Max 35kV, Wire Size 3/0 Str, Length 2-7/8 Inch, Tin Plated, Die Color Code Ruby

ASP30

Type ASP Aluminum Splice, Max 35kV, Wire Size 3/0 Str, Length 2-7/8 Inch, Tin Plated, Die Color Code Ruby
Type ASP Aluminum Splice, Max 35kV, Wire Size 300 kcmil, Length 4 Inch, Tin Plated, Die Color Code Blue

ASP300

Type ASP Aluminum Splice, Max 35kV, Wire Size 300 kcmil, Length 4 Inch, Tin Plated, Die Color Code Blue
Type ASP Aluminum Splice, Max 35kV, Wire Size 350 kcmil, Length 3-7/8 Inch, Tin Plated, Die Color Code Brown

ASP350

Type ASP Aluminum Splice, Max 35kV, Wire Size 350 kcmil, Length 3-7/8 Inch, Tin Plated, Die Color Code Brown
Type ASP Aluminum Splice, Max 35kV, Wire Size 4 Str, Length 1-7/8 Inch, Tin Plated, Die Color Code Green

ASP4

Type ASP Aluminum Splice, Max 35kV, Wire Size 4 Str, Length 1-7/8 Inch, Tin Plated, Die Color Code Green

How to Install ASP AL9CU Compression Splices

This guide provides step-by-step instructions for installing ASP AL9CU aluminum compression splices for stranded, compressed, compact aluminum and copper cables. WARNING: Do not remove the oxide inhibitor from inside the splice barrel; insufficient compound can result in an unsafe connection. Installation should be performed by a qualified electrician with power disconnected.

Estimated time: 30m

Tools needed:

Wire brush (e.g., ABB catalog number WWB1), Crimping tool, Dies (specific to cable size and tool)

Supplies needed:

ASP AL9CU aluminum splice, Aluminum or copper cable

  1. Verify Wire and Splice Size

    Check the wire size marked on the aluminum splice to ensure it is the correct connector for the actual cable size to be used. NOTE: Use maximum cable for connector selection.

  2. Strip Cable Insulation

    Strip the cable insulation, taking care not to nick the cable strands.

  3. Wire Brush Cable

    Wire brush the cable side which will be inserted into the connector using a suitable wire brush (e.g., ABB catalog number WWB1).

  4. Fully Insert Cable

    Fully insert the prepared cable into the connector until it bottoms out.

  5. Crimp the Connector

    Refer to the Tool and Die Index. Select one of the tool/die combinations listed for the cable size; crimp the connector the number of times shown on the chart for the selected tool/die combination. For splices, make the first crimp just outside the knurl on each side of the center and space crimps uniformly along the splice.

  6. Clean Excess Inhibitor

    Wipe off any excess oxide inhibitor from the exterior of the splice, ensuring the compound remains inside the barrel for a safe connection.

Frequently Asked Questions about ABB - Installation Products

How are Thomas and Betts products typically installed?

Thomas and Betts products are installed using a variety of methods tailored to specific applications, including the use of flexible cords and cable fittings, non-metallic cable glands, and armored cable fittings. Proper selection of fittings is crucial to match the cable type and installation environment, ensuring durability and preventing physical damage. Tools such as the Blackburn® Comfort Crimp® and HEX-FLEX® systems enhance installation efficiency and reliability, reducing labor time and ensuring secure connections.

What accessories are available for Thomas and Betts products?

Thomas and Betts offers a comprehensive range of accessories for their products, including various cord and cable fittings, non-metallic cable glands, service entrance cable fittings, and armored cable fittings. Their accessories are designed to enhance installation efficiency and ensure compatibility with different cable types and environmental conditions, providing reliable connections for a wide array of applications.

What environmental ratings do Thomas and Betts products have?

Thomas and Betts products feature robust environmental ratings, including NEMA Type 1, 2, 3, 4, 4X, 12, and 13 certifications, as well as IEC 60529 IP66 protection. These ratings ensure that their products are designed to withstand harsh industrial environments, with capabilities to resist dust, water, and corrosion, and operate effectively in a wide temperature range.

What communication protocols do Thomas and Betts products support?

Thomas and Betts products support a wide range of industrial communication protocols, including Ethernet, DeviceNet, PROFIBUS, Modbus, CANopen, and others. This extensive compatibility ensures seamless integration and reliable communication across various industrial automation systems, catering to diverse application needs.

What are the key features of Thomas and Betts products?

Thomas and Betts products are known for their innovative designs, high performance, and compliance with industry standards such as the National Electrical Code and Underwriters' Laboratories. They offer a comprehensive range of rugged and reliable electrical fittings, including liquidtight and dust-tight connections, which enhance installation efficiency and reduce overall project costs. Their products are engineered for durability in harsh environments, ensuring long-term reliability and lower installed costs.

What are the main product lines offered by Thomas and Betts?

Thomas and Betts offers a comprehensive range of product lines including electrical connectors, cable management systems, grounding and bonding solutions, and industrial automation components. Their products are designed for durability and reliability in demanding industrial environments, ensuring optimal performance and safety across various applications.

What technical support does Thomas and Betts offer?

Thomas and Betts offers comprehensive technical support, including access to field application engineers for onsite training and installation assistance. Their technical support staff is available to address inquiries related to product specifications and installation practices, ensuring optimal performance and safety of electrical systems. Additionally, they provide a variety of training programs to enhance the knowledge and skills of users in the field.

What industries and applications are Thomas and Betts products used for?

Thomas and Betts products are utilized across various industries including electrical construction, industrial automation, telecommunications, and utilities. Their extensive range of cord and cable fittings, electrical boxes, and metal framing systems are designed for applications that require durability and reliability in harsh environments, ensuring optimal performance in both permanent and temporary installations.

What certifications and standards do Thomas and Betts products comply with?

Thomas and Betts products comply with critical international certifications including UL (Underwriters Laboratories), CSA (Canadian Standards Association), and CE (European Community). Our products are designed to meet rigorous industrial standards such as NEMA enclosure ratings and IEC 60529 IP ratings, ensuring safety and reliability across various industrial applications.

What are the main product lines offered by Ocal?

Ocal offers a comprehensive range of corrosion-resistant conduit systems, including PVC-coated conduit and fittings, conduit bodies, hazardous location fittings, and strut accessories. Their products are designed to provide superior corrosion protection, featuring a hot-dipped galvanizing process and UL listed Type 4X PVC-coated conduit bodies, ensuring durability in the most demanding environments.