END BRACKET PF3-BTW

Braking Resistor, 40 OHMS, 800 WATTS, GCE2 Enclosure, 12W x 7D x 5H in, 10 lbs

Braking Resistor, 13 OHMS, 3558 WATTS, GCE6 Enclosure, 19W x 10D x 5H in, 19 lbs

GENERAL PURPOSE PACKAGED DRIVE W/ DISCONNECT SWITCH AND FUSES, Product Family: ACS550, Horsepower: 30 HP, Output Current: 44 A, Voltage: 480 VAC , Voltage Range: 380-480V, NEMA 1 / UL Type 1 (IP21), Mounting: Wall-mounted, Advanced Control Panel, 3-Phase Input, 3-Phase Output, Frame: R3, Product HxWxD: 39.9 in x 10.2 in x 11.9 in, Product Weight: 75 lbs

GENERAL PURPOSE PACKAGED DRIVE W/ CIRCUIT BREAKER DISCONNECT, Product Family: ACS550, Horsepower: 300 HP, Output Current: 368 A, Voltage: 480 VAC , Voltage Range: 380-480V, NEMA 1 / UL Type 1 (IP21), Mounting: Free Standing, Advanced Control Panel, ControlNet Adapter, 3-Phase Input, 3-Phase Output, Frame: R8, Product HxWxD: 83.7 in x 31.7 in x 25.9 in, Product Weight: 793 lbs

Braking Resistor, 13.5 OHMS, 2509 WATTS, GCE6 Enclosure, 19W x 10D x 5H in, 19 lbs

Braking Resistor, 8.5 OHMS, 719.44 WATTS, GCE2 Enclosure, 12W x 7D x 5H in, 10 lbs

Braking Resistor, 8.5 OHMS, 937.125 WATTS, GCE3 Enclosure, 12W x 10D x 5H in, 13 lbs

MODULE DRIVE 4-QUADRANT (REVERSING), Product Family: DCS800, Horsepower: 50 HP @ 230 VAC / 100 HP @ 460 VAC, Output Current: 190 A @ 240 VDC / 190 A @ 500 VDC, Voltage: 230 VAC/240 VDC & 460 VAC/500 VDC, UL TYPE OPEN (IP00), Mounting: Wall-mount, ControlNet Adapter, 3-Phase Input, Frame: D2, Product HxWxD: 14.6 in x 10.6 in x 10.6 in, Product Weight: 35 lbs

MODULE DRIVE 4-QUADRANT (REVERSING), Product Family: DCS800, Horsepower: 60 HP @ 230 VAC / 150 HP @ 460 VAC, Output Current: 247 A @ 240 VDC / 247 A @ 500 VDC, Voltage: 230 VAC/240 VDC & 460 VAC/500 VDC, UL TYPE OPEN (IP00), Mounting: Wall-mount, 3-Phase Input, Frame: D2, Product HxWxD: 14.6 in x 10.6 in x 10.6 in, Product Weight: 35 lbs

ACS550 AC Drive, 3-380-480V In, 20HP, 31A, Type 12/IP55, 1.1 overload, Advanced, 24.8 x 10.1 x 10 in, Wall, Relay output extension

CANopen is a higher layer protocol based on the CAN (Control Area Network) serial bus system and the CAL (CAN Application Layer). CANopen assumes that the hardware of the connected device has a CAN transceiver and a CAN controller as specified in ISO 11898. The CANopen Communication Profile, CiA Ds301, includes both cyclic and event driven communication, which makes it possible to reduce the bus load to minimum while still maintaining extremely short reaction times. High communication performance can be achieved at relatively low baud rates, thus reducing EMC problems and cable costs. CANopen device profiles define both direct access to drive parameter and time critical process data communication. The FCAN-01 module fulfills CiA (CAN in Automation) standard DSP 402 (Drives and Motion Control).